AXI 22 ATは、Dante®オーディオネットワークで構成されたシステムに、2系統のマイク/ラインソースを接続することを可能にする、1/4ラック幅のオーディオインターフェイスです。48 Vのファントム電源を供給可能なマイク/ライン入力2系統をミニターミナルブロックに装備しています。入力選択、レベル調整、およびファントム電源オン/オフが、フロントパネル、DSP Configuratorソフトウェアまたは、USB経由のSISコマンドにより可能です。また、2系統のラインレベル出力を装備、ネットワーク経由で入力したDanteオーディオチャンネルから任意の2系統をオーディオシステムに出力可能です。DMP 128 Plus C AT等のDanteに対応したオーディオプロセッサーに接続可能、PoE (Power over Ethernet)による受電も可能です。1本のネットワークケーブルでメインAV機器ラックと接続して、双方向のオーディオチャンネルの伝送および受電が可能です。
Provide an audio expansion interface that shall support two mono analog inputs, capable of microphone or line level signals, and two mono analog outputs, capable of line level signals, placed directly onto a Dante™ audio network.
Two input, two output audio expansion interface with Dante audio networking and 24-bit/96 kHz audio converters
Input Requirements
Shall support two mono analog inputs that accepts 3.5 mm captive screw connectors:
Microphone level
Line level, balanced or unbalanced
Shall provide input gain adjustment from 0 dB to +42 dB in 3 dB steps, adjustable per input
Shall provide independently selectable +48 volt phantom power for condenser microphones on both mic/line inputs
Shall provide analog to digital conversion up to 96 kHz sampling rate with 24-bit resolution
Output Requirements
Shall support two mono line level, balanced or unbalanced outputs that accept 3.5 mm captive screw connectors
Outputs will be routed from a Dante audio network
Shall provide digital to analog conversion up to 96 kHz sampling rate with 24-bit resolution
Audio Device Requirements
Shall provide an analog input to Dante signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, at maximum input, unweighted
Shall provide a Dante to analog output signal-to-noise ratio of 115 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.01% measured at 20 Hz to 20 kHz, at maximum level
Configuration Software Requirements
Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
Shall provide a Live mode for real-time control of parameters
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs
Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
Shall provide cut, copy, and paste editing between processing blocks
Shall provide real-time metering of levels within each processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
Dante Audio Networking Requirements
Shall support incoming channels and outgoing channels over a local area network using standard Internet protocols
Shall support Dante Controller software for digital audio network configuration
Shall support Dante Domain Manager network management software for network security and logical segmenting.
Shall support the AES67 standard for interoperability with other devices that also support AES67
Shall provide an RJ-45 connector to support Dante audio network connection and direct interconnection between Dante-enabled products, such as Extron DMP 128 Plus AT units
Shall provide uncompressed digital audio up to 96 kHz sampling rate with 24-bit resolution
Shall provide selectable 1.0 ms (default), 2.0 ms, or 5.0 ms of deterministic latency
Control Requirements
Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
Shall support remote control operation via USB using DSP Configurator software
Shall provide front panel controls for input gain and phantom power
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide green LEDs for input and output signal presence indication
Shall provide red LEDs for clip warning indication
Shall provide an input selector button to toggle the front panel control focus between channels
Green LEDs will indicate the selected channel
Shall provide an eight segment LED ladder for metering and gain indication of the selected channel
Shall provide a recessed encoder for input gain control of the selected channel
Shall provide a recessed switch to toggle phantom power on the selected channel
Green LEDs will indicate phantom power status per channel
Shall provide a Configuration port on mini USB B connector
Rear Panel Requirements
Shall provide two balanced/unbalanced analog mic/line inputs that accept 3.5 mm captive screw connectors
Shall provide two balanced/unbalanced analog outputs that accept 3.5 mm captive screw connectors
Shall provide an RJ-45 connector to support PoE, Dante audio network connection, and direct interconnection between Dante-enabled products, such as Extron DMP 128 Plus AT units
Shall provide an external power input on a 2-pole captive screw connector
General Requirements
Shall support energy-efficient external universal power supply with a 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 1 A, 12 watts
Shall support use of optional Extron ZipClip™ 200 mounting bracket
Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall be enclosed in a rack-mountable 1U, quarter rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI Class A
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three year parts and labor warranty
Approved device shall be the Extron AXI 22, part number 60-1627-11; no alternates or equals.
AXI 22 AT
Provide an audio expansion interface that shall support two mono analog inputs, capable of microphone or line level signals, and two mono analog outputs, capable of line level signals, placed directly onto a Dante™ audio network.
Two input, two output audio expansion interface with Dante audio networking and 24-bit/96 kHz audio converters
Input Requirements
Shall support two mono analog inputs that accepts 3.5 mm captive screw connectors:
Microphone level
Line level, balanced or unbalanced
Shall provide input gain adjustment from 0 dB to +42 dB in 3 dB steps, adjustable per input
Shall provide independently selectable +48 volt phantom power for condenser microphones on both mic/line inputs
Shall provide analog to digital conversion up to 96 kHz sampling rate with 24-bit resolution
Output Requirements
Shall support two mono line level, balanced or unbalanced outputs that accept 3.5 mm captive screw connectors
Outputs will be routed from a Dante audio network
Shall provide digital to analog conversion up to 96 kHz sampling rate with 24-bit resolution
Audio Device Requirements
Shall provide an analog input to Dante signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, at maximum input, unweighted
Shall provide a Dante to analog output signal-to-noise ratio of 115 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.01% measured at 20 Hz to 20 kHz, at maximum level
Configuration Software Requirements
Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
Shall provide a Live mode for real-time control of parameters
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs
Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
Shall provide cut, copy, and paste editing between processing blocks
Shall provide real-time metering of levels within each processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
Dante Audio Networking Requirements
Shall support incoming channels and outgoing channels over a local area network using standard Internet protocols
Shall support Dante Controller software for digital audio network configuration
Shall support Dante Domain Manager network management software for network security and logical segmenting.
Shall support the AES67 standard for interoperability with other devices that also support AES67
Shall provide an RJ-45 connector to support Dante audio network connection and direct interconnection between Dante-enabled products, such as Extron DMP 128 Plus AT units
Shall provide uncompressed digital audio up to 96 kHz sampling rate with 24-bit resolution
Shall provide selectable 1.0 ms (default), 2.0 ms, or 5.0 ms of deterministic latency
Control Requirements
Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
Shall support remote control operation via USB using DSP Configurator software
Shall provide front panel controls for input gain and phantom power
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide green LEDs for input and output signal presence indication
Shall provide red LEDs for clip warning indication
Shall provide an input selector button to toggle the front panel control focus between channels
Green LEDs will indicate the selected channel
Shall provide an eight segment LED ladder for metering and gain indication of the selected channel
Shall provide a recessed encoder for input gain control of the selected channel
Shall provide a recessed switch to toggle phantom power on the selected channel
Green LEDs will indicate phantom power status per channel
Shall provide a Configuration port on mini USB B connector
Rear Panel Requirements
Shall provide two balanced/unbalanced analog mic/line inputs that accept 3.5 mm captive screw connectors
Shall provide two balanced/unbalanced analog outputs that accept 3.5 mm captive screw connectors
Shall provide an RJ-45 connector to support PoE, Dante audio network connection, and direct interconnection between Dante-enabled products, such as Extron DMP 128 Plus AT units
Shall provide an external power input on a 2-pole captive screw connector
General Requirements
Shall support energy-efficient external universal power supply with a 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 1 A, 12 watts
Shall support use of optional Extron ZipClip™ 200 mounting bracket
Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall be enclosed in a rack-mountable 1U, quarter rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI Class A
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three year parts and labor warranty
Approved device shall be the Extron AXI 22, part number 60-1627-11; no alternates or equals.
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
AXI 22 AT -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.