Provide an audio expansion interface that shall support sixteen mono analog outputs, capable of line level signals, sourced from the EXP expansion bus
Sixteen output audio expansion interface with 24-bit/48 kHz audio converters
Output Requirements
Shall support sixteen mono line level, balanced or unbalanced outputs that accept 3.5 mm captive screw connectors
Outputs will be sourced from the EXP expansion bus of a connected DMP 128 Plus, DMP 128, or DTP CrossPoint, or other EXP bus-capable device
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution
Audio Device Requirements
Shall provide an EXP expansion bus to analog output signal-to-noise ratio of 115 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.01% measured at 20 Hz to 20 kHz, at maximum level
Shall support a nominal level of -10 dBV (316 mV) or +4 dBu (1.23 V)
Shall provide a maximum output level (Hi-Z) of >+21 dBu balanced or >+15 dBu unbalanced
EXP Expansion Bus Requirements
Shall support Primary and Secondary device connection to the EXP expansion bus
Shall provide two RJ-45 ports for EXP expansion bus connection
An EXP INPUT port that connects to a primary device, which sends EXP expansion output signals of the primary device to the analog outputs of the AXI 016
An EXP THRU port that connects to a secondary device, which sends EXP expansion outputs from the secondary device to the EXP expansion inputs of the primary device
EXP INPUT port sends EXP expansion output signals of the primary device to the EXP expansion inputs of the secondary device, when a secondary device is connected to the EXP THRU port
EXP THRU port sends EXP expansion output signals of the connected secondary device to the analog outputs of the AXI 016 when a primary device is not connected
Shall support 16 bidirectional channels of audio per connection
Shall provide uncompressed digital audio up to 48 kHz sampling rate with 24-bit resolution
Shall support connection with a shielded CAT 6 cable up to 10 meters
Panel Requirements
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide green LEDs for output signal presence and meter level indication
Shall provide red LEDs for clip warning indication at −3 dBFS
Shall provide green LEDs to indicate EXP port connectivity
Rear Panel Requirements
Shall provide sixteen balanced/unbalanced analog outputs that accept 3.5 mm captive screw connectors
Shall provide two RJ-45 ports to support EXP expansion bus connection
Shall provide an LED indicator per EXP port to indicate port connectivity and clock synchronization between ports and devices
Shall provide an external power inlet that accepts a 2-pole captive screw connector
General Requirements
Shall support an energy-efficient external universal power supply with a 2-pole captive screw connector
Shall be a universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 1.5 A, 18 watts
Shall support use of optional Extron ZipClip™ mounting brackets
Shall bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall meet regulatory compliances for safety and EMI/EMC
BSMI, CCC, CE, -Tick, c-UL, CISPR 22 Class B, CISPR 24, FCC Class B, KC, NEC Class 2, PSE, S-mark, UL
Shall meet environmental requirements of CEC, EU code of conduct, RoHS, WEEE
Approved power supply shall be the Extron PS 1215 C, part number 70-1174-01, or equivalent
Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI Class A
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three year parts and labor warranty
Approved device shall be the Extron AXI 016, part number 60-1690-01;
AXI 016
Provide an audio expansion interface that shall support sixteen mono analog outputs, capable of line level signals, sourced from the EXP expansion bus
Sixteen output audio expansion interface with 24-bit/48 kHz audio converters
Output Requirements
Shall support sixteen mono line level, balanced or unbalanced outputs that accept 3.5 mm captive screw connectors
Outputs will be sourced from the EXP expansion bus of a connected DMP 128 Plus, DMP 128, or DTP CrossPoint, or other EXP bus-capable device
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution
Audio Device Requirements
Shall provide an EXP expansion bus to analog output signal-to-noise ratio of 115 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.01% measured at 20 Hz to 20 kHz, at maximum level
Shall support a nominal level of -10 dBV (316 mV) or +4 dBu (1.23 V)
Shall provide a maximum output level (Hi-Z) of >+21 dBu balanced or >+15 dBu unbalanced
EXP Expansion Bus Requirements
Shall support Primary and Secondary device connection to the EXP expansion bus
Shall provide two RJ-45 ports for EXP expansion bus connection
An EXP INPUT port that connects to a primary device, which sends EXP expansion output signals of the primary device to the analog outputs of the AXI 016
An EXP THRU port that connects to a secondary device, which sends EXP expansion outputs from the secondary device to the EXP expansion inputs of the primary device
EXP INPUT port sends EXP expansion output signals of the primary device to the EXP expansion inputs of the secondary device, when a secondary device is connected to the EXP THRU port
EXP THRU port sends EXP expansion output signals of the connected secondary device to the analog outputs of the AXI 016 when a primary device is not connected
Shall support 16 bidirectional channels of audio per connection
Shall provide uncompressed digital audio up to 48 kHz sampling rate with 24-bit resolution
Shall support connection with a shielded CAT 6 cable up to 10 meters
Panel Requirements
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide green LEDs for output signal presence and meter level indication
Shall provide red LEDs for clip warning indication at −3 dBFS
Shall provide green LEDs to indicate EXP port connectivity
Rear Panel Requirements
Shall provide sixteen balanced/unbalanced analog outputs that accept 3.5 mm captive screw connectors
Shall provide two RJ-45 ports to support EXP expansion bus connection
Shall provide an LED indicator per EXP port to indicate port connectivity and clock synchronization between ports and devices
Shall provide an external power inlet that accepts a 2-pole captive screw connector
General Requirements
Shall support an energy-efficient external universal power supply with a 2-pole captive screw connector
Shall be a universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 1.5 A, 18 watts
Shall support use of optional Extron ZipClip™ mounting brackets
Shall bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall meet regulatory compliances for safety and EMI/EMC
BSMI, CCC, CE, -Tick, c-UL, CISPR 22 Class B, CISPR 24, FCC Class B, KC, NEC Class 2, PSE, S-mark, UL
Shall meet environmental requirements of CEC, EU code of conduct, RoHS, WEEE
Approved power supply shall be the Extron PS 1215 C, part number 70-1174-01, or equivalent
Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI Class A
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three year parts and labor warranty
Approved device shall be the Extron AXI 016, part number 60-1690-01;
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
AXI 016 -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.