PowerCage 401 FOX DR HD

PowerCage 401 FOX DR HD MM

1. Shall provide two (2) fiber optic receivers on a single module that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control signals
   1. Single-slot module designed for the Extron PowerCage 401 enclosure
   2. Long distance signal extension of video, audio, and control signals over multimode fiber optic cabling
   3. Video output requirements
      1. Shall provide two (2) female HDMI Type A connectors, one (1) per receiver, for digital video signals with or without embedded audio
      2. Shall support video resolutions up to 1920x1200, including 1080p @ 60 Hz
   4. Audio output requirements
      1. Shall support two-channel embedded audio on HDMI output connectors
      2. Shall provide two (2) 3.5 mm stereo mini jacks, one (1) per receiver, for unbalanced analog stereo
      3. Shall support audio de-embedding from HDMI signals
      4. Shall provide audio muting capability
   5. HDCP requirements
      1. Shall be HDCP compliant
      2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
      3. Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
   6. AV device control requirements
      1. Shall provide two (2) bidirectional RS-232 connectors, one (1) per receiver, for controlling local or remote AV devices
      2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
         1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
         2. RS-232 insertion from the Ethernet port on the PowerCage 401 enclosure to the local RS-232 port on the module for communicating with a local device
         3. RS-232 insertion from the Ethernet port on the PowerCage 401 enclosure onto the fiber for communicating with a remote device
   7. Interconnection requirements
      1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
      2. Shall provide four (4) LC-type fiber optic connectors, two (2) per each receiver, for interconnection between transmitters and receivers
   8. Transmission requirements
      1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
      2. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
      3. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
   9. Setup, control, and configuration requirements
      1. Shall support module setup, configuration, and control via the PowerCage 401 enclosure
         1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
         2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
         3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
         4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
      2. Shall provide a signal via the enclosure to trigger an external control system for alarm notification in case of fiber link loss
      3. Shall support Extron Product Configuration Software – PCS for setup and configuration
   10. Power requirements
       1. Shall be supplied power by a PowerCage 401 enclosure
   11. General requirements
       1. Shall provide visual signal on LED indicators for signal presence, HDCP authentication, link status, and power
       2. Shall be installed in a PowerCage 401 enclosure
       3. Shall be configured and controlled via the PowerCage 401 enclosure
       4. Shall be hot-swappable
       5. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS, WEEE
       6. Shall provide at least three (3) years parts and labor warranty
       7. Shall be compatible with Extron FOX Series HDMI, DVI, and VGA transmitters
       8. Shall be compatible with the Extron FOXBOX T HD-SDI transmitter
       9. Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
   12. Approved device shall be the Extron PowerCage 401 FOX DR HD MM (70-1092-21); no alternates or equals