AXI 22 AT D Plusは、マイク/ラインレベル入力2系統をDante®に対応したオーディオシステムに統合するための、1連サイズDecorator型ウォールプレートオーディオインターフェイスです。コンデンサーマイクに48 Vの電源を供給可能なオーディオXLR入力2系統を装備、ネットワーク経由で制御が可能です。また、ライン出力2系統を装備、ネットワーク経由で入力したDanteオーディオ2チャンネルを他の機器のアナログ入力にルーティングしたり、XLR出力2系統を装備した別のウォールプレートに接続したりすることが可能です。DMP 128 Plus AT等のDanteに対応したオーディオプロセッサーにLAN経由で接続、PoE (Power over Ethernet)による受電も可能です。1本のネットワークケーブルでメインAV機器ラックと接続して、双方向のオーディオチャンネル、制御信号の伝送および受電が可能です。
Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
Input Requirements
Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Output Requirements
Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
Outputs will be routed from Dante audio network
Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Configuration Software Requirements
Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
Shall provide a Live mode for real-time control of parameters
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs
Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
Shall provide cut, copy, and paste editing between processing blocks
Shall provide real-time metering of levels within each processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
Dante Audio Networking Requirements
Shall support incoming and outgoing channels over a local area network using standard Internet protocols
Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
Shall support Dante Controller software for digital audio network configuration
Shall support Dante Domain Manager network management software for network security and logical segmenting.
Shall support the AES67 standard for interoperability with other devices that also support AES67
Shall provide an RJ-45 connector to support Dante audio network connection
Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Control Requirements
Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
Shall support remote control operation via USB using DSP Configurator software
Front Panel Requirements
Shall provide two mono mic/line level inputs on female XLR connectors
Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
Shall be concealed behind a removable cover plate
Shall provide a reset button
Shall be concealed behind a removable cover plate
Rear Panel Requirements
Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
General Requirements
Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 0.5 A, 6 watts
Shall support use of optional Extron ZipClip™ 100 mounting kit
Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall support remote powering through PoE with RJ-45 connection
Shall conform to 802.3af standard
Shall mount in an included decorator-style wallplate
Shall include both black and white faceplates
Shall meet regulatory compliances
Shall meet safety compliances under CE and c-UL
Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three years parts and labor warranty
Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.
AXI 22 AT D Plus
Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
Input Requirements
Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Output Requirements
Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
Outputs will be routed from Dante audio network
Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Configuration Software Requirements
Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
Shall provide a Live mode for real-time control of parameters
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs
Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
Shall provide cut, copy, and paste editing between processing blocks
Shall provide real-time metering of levels within each processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
Dante Audio Networking Requirements
Shall support incoming and outgoing channels over a local area network using standard Internet protocols
Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
Shall support Dante Controller software for digital audio network configuration
Shall support Dante Domain Manager network management software for network security and logical segmenting.
Shall support the AES67 standard for interoperability with other devices that also support AES67
Shall provide an RJ-45 connector to support Dante audio network connection
Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
Control Requirements
Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
Shall support remote control operation via USB using DSP Configurator software
Front Panel Requirements
Shall provide two mono mic/line level inputs on female XLR connectors
Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
Shall be concealed behind a removable cover plate
Shall provide a reset button
Shall be concealed behind a removable cover plate
Rear Panel Requirements
Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
General Requirements
Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 0.5 A, 6 watts
Shall support use of optional Extron ZipClip™ 100 mounting kit
Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
Shall support remote powering through PoE with RJ-45 connection
Shall conform to 802.3af standard
Shall mount in an included decorator-style wallplate
Shall include both black and white faceplates
Shall meet regulatory compliances
Shall meet safety compliances under CE and c-UL
Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
Shall comply with appropriate requirements of RoHS and WEEE
Shall provide three years parts and labor warranty
Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
AXI 22 AT D Plus -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.