DTP3 T 202

DTP3 T 202

1. Provide an HDMI twisted pair transmitter that shall support the distribution of video, audio, and control over a shielded CAT6A cable
   1. Rack-mountable transmitter for the extension of HDMI, audio, and control
   2. Video input requirements
      1. Shall provide one (1) HDMI input for digital video signals with or without embedded audio
         1. Supported HDMI 2.0b specifications include data rates up to 18 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
   3. Video output requirements
      1. Provide one (1) HDMI for buffered input loop-through for local monitor support or system expansion
   4. Audio input requirements
      1. Shall support embedded digital audio on HDMI input
   5. Control input requirements
      1. Shall provide communication connections for AV device control
         1. One bidirectional RS-232 pass-through
   6. Interconnection requirements
      1. Shall support interconnection between transmitter and receiver or DTP®-enabled products
         1. One RJ-45 twisted pair connection
      2. Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 signals to an HDBaseT-enabled display
   7. Transmission requirements
      1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT6A cable
      2. Shall support High Dynamic Range – HDR video
      3. Shall actively buffer DDC channels
   8. Resolution requirements
      1. Shall support uncompressed computer and video resolutions up to 4K/60 at 4:4:4 chroma sampling
      2. Shall support RGB and YCbCr digital video formats
   9. Audio requirements
      1. Shall support multiple embedded audio formats
      2. Shall support embedded HD lossless audio formats
   10. HDCP requirements
       1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
   11. Communication requirements
       1. Shall support bidirectional RS-232 communication pass-through up to 115200 baud
       2. Shall support EDID and HDCP transmission
   12. Power requirements
       1. Shall accept remote power from a DTP3-enabled product
       2. Shall accept local power
       3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
   13. General requirements
       1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
       2. Shall be compatible with CAT6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
       3. Shall have a 1-inch (2.5 cm) high, quarter rack width metal enclosure
       4. Shall provide versatile mounting capability
       5. Shall provide visual indication of RJ-45 signal and link status for DTP port
       6. Shall provide visual indication for signal presence, power, and link status on front panel
       7. Shall provide Extron LockIt® HDMI cable lacing brackets
       8. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       9. Shall meet regulatory compliances
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS and WEEE
       10. Shall provide at least three (3) years parts and labor warranty
       11. Shall be compatible with other DTP-enabled products
   14. Approved device shall be the Extron DTP3 T 202(60-1869-52); no alternates or equals