最近閲覧した製品
FOXBOX SR HDMI
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
FOXBOX SR HDMI MM
- Provide a fiber optic scaling receiver that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control
- Long distance signal extension and scaling of video, audio, and control over multimode fiber optic cabling
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall provide selectable output resolutions up to 1920x1200, including HDTV 1080p @ 60 Hz and 2048x1080p @ 60 Hz
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio muting capability
- Shall provide one (1) toggle switch on rear panel to enable/disable HDMI audio pass-through
- Control requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for RS-232 pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between unit and transmitter
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide visual signal on LED indicators located on front panel for HDMI video signal presence, HDCP compliance, audio signal presence, and power
- Shall provide visual signal on LED indicators located on rear panel for link status
- Shall provide five internal test patterns consisting of grayscale, crosshatch, crop pattern, color bars, and alternating pixels for display calibration and setup
- Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
- Shall provide Extron LockIt® HDMI cable lacing brackets
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, VGA, and VGA/YUV transmitters
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOXBOX SR HDMI MM (60-1187-21); no alternates or equals
FOXBOX SR HDMI MM
- Provide a fiber optic scaling receiver that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control
- Long distance signal extension and scaling of video, audio, and control over multimode fiber optic cabling
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall provide selectable output resolutions up to 1920x1200, including HDTV 1080p @ 60 Hz and 2048x1080p @ 60 Hz
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio muting capability
- Shall provide one (1) toggle switch on rear panel to enable/disable HDMI audio pass-through
- Control requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for RS-232 pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between unit and transmitter
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide visual signal on LED indicators located on front panel for HDMI video signal presence, HDCP compliance, audio signal presence, and power
- Shall provide visual signal on LED indicators located on rear panel for link status
- Shall provide five internal test patterns consisting of grayscale, crosshatch, crop pattern, color bars, and alternating pixels for display calibration and setup
- Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
- Shall provide Extron LockIt® HDMI cable lacing brackets
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, VGA, and VGA/YUV transmitters
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOXBOX SR HDMI MM (60-1187-21); no alternates or equals
FOXBOX SR HDMI SM
- Provide a fiber optic scaling receiver that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control
- Long distance signal extension of video, audio, and control over singlemode fiber optic cabling
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall provide selectable output resolutions up to 1920x1200, including HDTV 1080p @ 60 Hz and 2048x1080p @ 60 Hz
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio muting capability
- Shall provide one (1) toggle switch on rear panel to enable/disable HDMI audio pass-through
- Control requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for RS-232 pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between unit and transmitter
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide visual signal on LED indicators located on front panel for HDMI video signal presence, HDCP compliance, audio signal presence, and power
- Shall provide visual signal on LED indicators located on rear panel for link status
- Shall provide five internal test patterns consisting of grayscale, crosshatch, crop pattern, color bars, and alternating pixels for display calibration and setup
- Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
- Shall provide Extron LockIt® HDMI cable lacing brackets
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, VGA, and VGA/YUV transmitters
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOXBOX SR HDMI SM (60-1187-22); no alternates or equals
FOXBOX SR HDMI SM
- Provide a fiber optic scaling receiver that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control
- Long distance signal extension of video, audio, and control over singlemode fiber optic cabling
- Video output requirements
- Shall provide one (1) HDMI Type A connector for digital video signals with embedded audio
- Shall provide selectable output resolutions up to 1920x1200, including HDTV 1080p @ 60 Hz and 2048x1080p @ 60 Hz
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio muting capability
- Shall provide one (1) toggle switch on rear panel to enable/disable HDMI audio pass-through
- Control requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector on rear panel for RS-232 pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between unit and transmitter
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
- General requirements
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide visual signal on LED indicators located on front panel for HDMI video signal presence, HDCP compliance, audio signal presence, and power
- Shall provide visual signal on LED indicators located on rear panel for link status
- Shall provide five internal test patterns consisting of grayscale, crosshatch, crop pattern, color bars, and alternating pixels for display calibration and setup
- Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
- Shall provide Extron LockIt® HDMI cable lacing brackets
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, VGA, and VGA/YUV transmitters
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOXBOX SR HDMI SM (60-1187-22); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

FOXBOX SR HDMI
HDMI、音声およびRS-232用スケーラー内蔵光ファイバーレシーバー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。