製品ページホーム
HDMI製品
HDMIエクステンダー
HDMI分配器 HDMIスイッチャー HDMIマトリックススイッチャー HDMIスケーラー & シグナルプロセッサー HDMI AVコネクティビティーモジュール HDMIケーブル & アダプター EDID管理
FOX3 T 201 PC
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T DWP 4K 232 D DTP T DWP 4K 332 D DTP T FB 232 DTP T FB 332 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 201 D DTP2 T 202 FB DTP2 T 203 DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 R 301 DTP3 T 101 D DTP3 T 202 DTP3 T 203 DTP3 T 301 FOX II T HD 4K FOX T USW 103 FOX T USW 203 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HC 402 HC 403 HC 404 HD 4K 101 Plus HD Pro Plenumシリーズ HFX 100 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI

印刷

New Pro

FOX3 T 201 PC

HDMI、オーディオ、制御信号対応PowerCage光ファイバートランスミッター

主な特長

光ファイバーケーブルを使用して、HDMI、ステレオオーディオおよびRS-232制御信号を長距離伝送
数学的ロスレス圧縮された最大解像度4096x2160 @ 60 Hz、4:4:4カラーサンプリングの4Kビデオに1本の光ファイバーケーブルで対応
非圧縮の最大解像度4096x2160 @ 60 Hz、4:4:4カラーサンプリングの4Kビデオに2本の光ファイバーケーブルで対応
対応するHDMI 2.0の規格: 最大データレート18 Gbps、12ビットディープカラー、3D
HDCP 2.3準拠
ホットスワップ可能なモジュール式PowerCage 411フレーム(製品番号60‑1492‑02)用モジュール
詳しくはこちらから

PowerCage 411 Populated with FOX3 T 201 PC Boards

Previous Next

製品イメージ

概要
ビデオ
詳細
仕様
システム図
パネル図面
ダウンロード

概要

FOX3 T 201 PC光ファイバーデュアルトランスミッターは、PowerCage 41光ファイバーでHDMIビデオ、オーディオおよび制御信号を長距離伝送します。光ファイバーでHDMIビデオ、ステレオオーディオ、制御信号を長距離伝送します。高画質性能を実現するために開発、エクストロン独自のフルデジタルテクノロジーにより、非圧縮の4K/60 4:4:4ビデオを2本の光ファイバーケーブルで伝送可能、また数学的ロスレス圧縮された4K/60 4:4:4ビデオを1本の光ファイバーケーブルで伝送可能です。AVシステムとKVMシステム専用に設計されたトランスミッターは、Minder®、EDID Minder®、オーディオエンベッド機能、リアルタイムシステム監視等の、インテグレーションを容易にする多彩な機能を搭載しています。

ビデオ

詳細

仕様

システム図

パネル図面

ダウンロード

70-1224-11 – FOX3 T 201 PC MM – Lossless 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
  3. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
  4. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
  5. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
  2. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
  3. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
  4. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
  5. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  6. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
  4. CE, c-UL, UL
  5. CE, C-tick, FCC Class A, ICES, VCCI
  6. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least (3) three years parts and labor warranty
  8. Shall be compatible with Extron FOX3 Series fiber optic receivers
  9. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 MM (70-1224-11); no alternates or equals

70-1224-11 – FOX3 T 201 PC MM – Lossless 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
  3. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
  4. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
  5. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
  2. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
  3. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
  4. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
  5. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  6. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
  4. CE, c-UL, UL
  5. CE, C-tick, FCC Class A, ICES, VCCI
  6. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least (3) three years parts and labor warranty
  8. Shall be compatible with Extron FOX3 Series fiber optic receivers
  9. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 MM (70-1224-11); no alternates or equals

70-1224-12 – FOX3 T 201 PC SM – Lossless 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 SM (70-1224-12); no alternates or equals

70-1224-12 – FOX3 T 201 PC SM – Lossless 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 SM (70-1224-12); no alternates or equals

70-1224-13 – FOX3 T 201 PC MM – Uncompressed 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 MM (70-1224-13); no alternates or equals

70-1224-13 – FOX3 T 201 PC MM – Uncompressed 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 MM (70-1224-13); no alternates or equals

70-1224-14 – FOX3 T 201 PC SM – Uncompressed 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 SM (70-1224-14); no alternates or equals

70-1224-14 – FOX3 T 201 PC SM – Uncompressed 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
8. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 201 SM (70-1224-14); no alternates or equals

アイテムをカートに追加する

Order Message Number

製品番号

注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

数量

現在の合計金額:

カートを見る

FOX3 T 201 PC -

製品ページを表示

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.