DTP3 T 203 3入力トランスミッターは、USB‑C®ビデオ、HDMI、制御信号を1本のCAT 6Aケーブルで最長100 m伝送可能です。4K/60および4:4:4カラーサンプリングに対応、HDCP 2.3にも準拠しています。対応するすべての解像度を圧縮せずに伝送、最高の画質と無遅延を実現します。バッファー付きHDMIおよびDTP出力、60 W USB‑C給電機能、イーサネットによるリモート制御により、業務用システムへの統合を容易にします。システム統合に便利な、EDID Minder®、オートスイッチング機能およびリモートAV機器制御用双方向RS‑232パススルー機能を搭載しています。ハーフラック幅の筐体は、演台の中、テーブルの天板裏等の目に触れない、適切な場所に容易に取り付けることが可能です。
Provide a twisted pair switcher that shall support one USB-C® input and two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CAT 6A cable
Rack-mountable switcher for the extension of USB-C, HDMI, audio, and control
Video input requirements
Shall provide one (1) USB-C input for digital video signals
Shall support USB-C sources with DisplayPort Alt Mode
Shall provide two (2) HDMI inputs for digital video signals
Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
Audio input requirements
Shall support embedded digital audio on USB-C input
Shall support embedded digital audio on HDMI inputs
Shall support multiple embedded audio formats
Shall support embedded HD lossless audio formats
Video output requirements
Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
Shall provide one (1) mirrored HDMI output
Switching requirements
Shall provide configurable automatic switching modes between input sources
Last connected: always switch to the last active connected input
Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
Transmission requirements
Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
EDID requirements
Shall provide automatic EDID management between connected devices
Provide a set of pre-stored EDID files
Support capture of EDID from any connected display
Support user uploading of custom-generated EDID files
Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
HDCP requirements
Shall be HDCP 2.3 compliant
Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
Shall provide real-time verification of HDCP status for each digital video input
Accessible through front panel LEDs
Electronically accessible over Ethernet, RS-232 or USB connection
Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
Shall provide connection for AV device control
One (1) 3-pole captive screw: RS-232 pass-through over DTP
RS-232 serial communication insertion from Ethernet port
Control/Remote – switcher control requirements
Shall provide connections for remote switcher control
One (1) 3-pole captive screw: RS-232
USB-C port on front panel
One (1) 4-pole captive screw: contact closure in
One (1) 4-pole captive screw: tally out
One (1) RJ-45: 10/100 Ethernet port
Shall provide alternatives for configuration and operation
Front panel controls
Product configuration software connected via Ethernet and USB
Serial commands sent over Ethernet, RS-232 and USB connection
Contact closure ports for use as input selection
Tally output that provide +5 VDC to light an LED. indicating the currently selected input
Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
Power requirements
Shall provide DIP switch on rear panel for selection to provide power to a connected DTP3 receiver
Shall support USB-C device charging up to 60 watts
General requirements
Shall include a USB-C configuration port on the front panel for data access and firmware updates
Shall provide directly readable real-time verification of signal flow and operation
RJ-45 signal and link status LEDs on rear panel
LAN signal and link status LEDs on rear panel
Power status on front panel
Auto-switching selection status LED on front panel
Signal presence and HDCP status LEDs for active input/s on front panel
Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
Shall have a 1U high, half rack width metal enclosure
Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
Shall meet regulatory compliances
CE, c-UL, UL
CE, C-tick, FCC Class A, ICES, VCCI
Appropriate requirements of RoHS and WEEE
Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 203 (60-1885-52); no alternates or equals
DTP3 T 203
Provide a twisted pair switcher that shall support one USB-C® input and two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CAT 6A cable
Rack-mountable switcher for the extension of USB-C, HDMI, audio, and control
Video input requirements
Shall provide one (1) USB-C input for digital video signals
Shall support USB-C sources with DisplayPort Alt Mode
Shall provide two (2) HDMI inputs for digital video signals
Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
Audio input requirements
Shall support embedded digital audio on USB-C input
Shall support embedded digital audio on HDMI inputs
Shall support multiple embedded audio formats
Shall support embedded HD lossless audio formats
Video output requirements
Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
Shall provide one (1) mirrored HDMI output
Switching requirements
Shall provide configurable automatic switching modes between input sources
Last connected: always switch to the last active connected input
Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
Transmission requirements
Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
EDID requirements
Shall provide automatic EDID management between connected devices
Provide a set of pre-stored EDID files
Support capture of EDID from any connected display
Support user uploading of custom-generated EDID files
Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
HDCP requirements
Shall be HDCP 2.3 compliant
Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
Shall provide real-time verification of HDCP status for each digital video input
Accessible through front panel LEDs
Electronically accessible over Ethernet, RS-232 or USB connection
Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
Shall provide connection for AV device control
One (1) 3-pole captive screw: RS-232 pass-through over DTP
RS-232 serial communication insertion from Ethernet port
Control/Remote – switcher control requirements
Shall provide connections for remote switcher control
One (1) 3-pole captive screw: RS-232
USB-C port on front panel
One (1) 4-pole captive screw: contact closure in
One (1) 4-pole captive screw: tally out
One (1) RJ-45: 10/100 Ethernet port
Shall provide alternatives for configuration and operation
Front panel controls
Product configuration software connected via Ethernet and USB
Serial commands sent over Ethernet, RS-232 and USB connection
Contact closure ports for use as input selection
Tally output that provide +5 VDC to light an LED. indicating the currently selected input
Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
Power requirements
Shall provide DIP switch on rear panel for selection to provide power to a connected DTP3 receiver
Shall support USB-C device charging up to 60 watts
General requirements
Shall include a USB-C configuration port on the front panel for data access and firmware updates
Shall provide directly readable real-time verification of signal flow and operation
RJ-45 signal and link status LEDs on rear panel
LAN signal and link status LEDs on rear panel
Power status on front panel
Auto-switching selection status LED on front panel
Signal presence and HDCP status LEDs for active input/s on front panel
Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
Shall have a 1U high, half rack width metal enclosure
Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
Shall meet regulatory compliances
CE, c-UL, UL
CE, C-tick, FCC Class A, ICES, VCCI
Appropriate requirements of RoHS and WEEE
Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 203 (60-1885-52); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
DTP3 T 203 -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.