製品ページホーム
HDMI製品
HDMIエクステンダー
HDMI分配器 HDMIスイッチャー HDMIマトリックススイッチャー HDMIスケーラー & シグナルプロセッサー HDMI AVコネクティビティーモジュール HDMIケーブル & アダプター EDID管理
FOX3 SR 201
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T DWP 4K 232 D DTP T DWP 4K 332 D DTP T FB 232 DTP T FB 332 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 201 D DTP2 T 202 FB DTP2 T 203 DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 R 301 DTP3 T 101 D DTP3 T 202 DTP3 T 203 DTP3 T 301 FOX II T HD 4K FOX T USW 103 FOX T USW 203 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HC 402 HC 403 HC 404 HD 4K 101 Plus HD Pro Plenumシリーズ HFX 100 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI

印刷

New Pro

FOX3 SR 201

HDMI、オーディオ、制御信号対応光ファイバースケーリングレシーバー

主な特長

近日対応予定オンスクリーンディスプレイによりワークステーションのディスプレイ上にソース情報を表示
FOX3シリーズトランスミッターから光ファイバー信号を受信、スケーリングを行い、HDMI、ステレオオーディオ、RS-232/IR制御信号を出力
高性能スケーリング機能により、最大4096x2160 @ 60 Hz、4:4:4カラーサンプリングの出力解像度を選択可能
数学的ロスレス圧縮された最大解像度4096x2160 @ 60 Hz、4:4:4カラーサンプリングの4Kビデオに1本の光ファイバーケーブルで対応
非圧縮の最大解像度4096x2160 @ 60 Hz、4:4:4カラーサンプリングの4Kビデオに2本の光ファイバーケーブルで対応
対応するHDMI 2.0の規格: 最大データレート18 Gbps、12ビットディープカラー
詳しくはこちらから

製品イメージ

概要
ビデオ
詳細
仕様
システム図
パネル図面
ダウンロード

概要

FOX3 SR 201光ファイバースケーリングレシーバーは、HDCP準拠のHDMIビデオ、オーディオ、RS-232/IR制御信号を光ファイバーケーブルで長距離伝送します。高画質性能を実現するために開発、エクストロン独自のフルデジタルテクノロジーにより、非圧縮の4K/60 4:4:4ビデオを2本の光ファイバーケーブルで伝送可能、また数学的ロスレス圧縮された4K/60 4:4:4ビデオを1本の光ファイバーで伝送可能です。AVシステム専用に設計されたFOX3 SR 201は、インテグレーションを容易にするKey Minder^®、オーディオディエンベッド機能、イーサネットによる監視/制御、リアルタイムシステム監視などの多彩な機能を搭載しています。コンパクトで薄型の筐体は、目立たずに取り付けることが可能です。

ビデオ

詳細

仕様

システム図

パネル図面

ダウンロード

60-1600-21 - FOX3 SR 201 MM - Lossless 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder�� technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 MM (60-1600-21); no alternates or equals

60-1600-21 - FOX3 SR 201 MM - Lossless 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 MM (60-1600-21); no alternates or equals

60-1600-22 - FOX3 SR 201 SM - Lossless 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 SM (60-1600-22); no alternates or equals

60-1600-22 - FOX3 SR 201 SM - Lossless 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 SM (60-1600-22); no alternates or equals

60-1600-23 - FOX3 SR 201 MM - Uncompressed 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1" high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 MM (60-1600-23); no alternates or equals

60-1600-23 - FOX3 SR 201 MM - Uncompressed 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1" high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 MM (60-1600-23); no alternates or equals

60-1600-24 - FOX3 SR 201 SM - Uncompressed 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 SM (60-1600-24); no alternates or equals

60-1600-24 - FOX3 SR 201 SM - Uncompressed 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, RS-232 control, and IR control
1. Long distance signal extension of digital video with embedded stereo audio, and control signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
7. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
8. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
9. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
10. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
  2. Shall support remote power over a LAN connection
11. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a compact 1” high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 201 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
12. Approved device shall be the Extron FOX3 SR 201 SM (60-1600-24); no alternates or equals

アイテムをカートに追加する

Order Message Number

製品番号

注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

数量

現在の合計金額:

カートを見る

FOX3 SR 201 -

製品ページを表示

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.