DTP3 CrossPoint 42シリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
DTP3 CrossPoint 42 USB
- Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
- Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
- Video input requirements
- Video input connections
- One (1) USB-C for digital video signals
- Shall support USB-C sources with DisplayPort Alt Mode
- Three (3) HDMI inputs for digital video signals
- Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
- One (1) USB-C for digital video signals
- Shall provide automatic 3:2 and 2:2 pulldown detection
- Video input connections
- Video output requirements
- Video output connections
- Two (2) switched video output channels
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
- DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
- DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
- DTP3 output shall be configurable for compatibility with
- Extron DTP inputs
- Extron DTP3 inputs
- HDBaseT inputs
- DTP3 and HDMI outputs shall support simultaneous content for local monitoring
- One (1) HDMI
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
- Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
- Shall provide motion adaptive deinterlacing for signals up to 1080i
- Shall provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze control
- Shall support upload and placement of a custom logo graphic at any position on the video output
- Shall support logo placement as a foreground image
- Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
- Shall support displaying full screen images up to 4096x2160 resolution
- Shall support up to 16 logo presets
- Shall support keying with selectable effects including transparency, color key, level key, and alpha key
- Shall provide a low power standby state selectable via Ethernet or USB
- Shall support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Shall support selection of output color space as RGB or component video
- Two (2) switched video output channels
- Video output connections
- Video Switching requirements
- Shall provide video matrix switching between any input and any output
- Shall support routing of scaled 4K or UHD video signals to all outputs
- Shall provide selectable transition effects when switching inputs
- Seamless Cut: video output shall freeze, then cut to the newly selected input source
- Seamless Fade: video output shall freeze, then fade into the newly selected input source
- Cut through black: video output shall cut to black, then cut to the newly selected input source
- Fade through black: video output shall fade to black, then fade into the newly selected input source
- Shall provide video matrix switching between any input and any output
- USB data and switching requirements
- USB host connections
- One (1) USB-C, shared with video input 1
- Two (2) USB type B
- Shall support data transfer rates up to USB 10Gbps
- Connections at four-port USB device hub
- Two (2) USB type A
- Shall support transfer rates up to 10 Gbps
- Two (2) USB type A
- Shall support transfer rates up to 480 Mbps
- Two (2) USB type A
- USB extension requirements
- Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
- Shall support transfer rates up to 480 Mbps
- USB host switching requirements
- USB host switching shall be independent of video switching
- Local 10 Gbps device ports shall always follow the selected host
- Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
- USB host connections
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Shall provide a set of pre-stored EDID files
- Shall support capture of EDID from any connected display
- Shall support user uploading of custom-generated EDID files
- Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Shall provide automatic EDID management between connected devices
- HDCP requirements
- The unit shall be HDCP 2.3 compliant
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
- Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When enabled, the option shall be provided to display a user-provided image in place of the green video output
- When disabled, the output shall be muted
- Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
- The unit shall be HDCP 2.3 compliant
- Audio requirements
- Audio input connections
- One (1) USB-C, embedded
- Three (3) HDMI, embedded
- Audio output connections
- One (1) simultaneous DTP3 and HDMI, embedded
- One (1) separately switched HDMI, embedded
- One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
- Shall support storage and playback of up to 16 audio files
- Audio input connections
- Control/remote - RS-232 pass-through over shielded CAT 6A requirements
- Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
- Control/remote - switcher requirements
- Control connections
- One (1) RJ-45: 10/100/1000Base-T Ethernet
- One (1) USB-C: USB 2.0
- Shall provide alternatives for configuration and operation
- Front panel controls
- Built-in Web pages accessible using a standard Web browser via Ethernet connection
- Product configuration software connected via Ethernet, or USB
- Serial commands sent over Ethernet or USB connection
- Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Control connections
- Power requirements
- Shall support USB-C device charging up to 60 watts
- Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
- Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
- General requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals
DTP3 CrossPoint 42 USB
- Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
- Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
- Video input requirements
- Video input connections
- One (1) USB-C for digital video signals
- Shall support USB-C sources with DisplayPort Alt Mode
- Three (3) HDMI inputs for digital video signals
- Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
- One (1) USB-C for digital video signals
- Shall provide automatic 3:2 and 2:2 pulldown detection
- Video input connections
- Video output requirements
- Video output connections
- Two (2) switched video output channels
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
- DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
- DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
- DTP3 output shall be configurable for compatibility with
- Extron DTP inputs
- Extron DTP3 inputs
- HDBaseT inputs
- DTP3 and HDMI outputs shall support simultaneous content for local monitoring
- One (1) HDMI
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
- Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
- Shall provide motion adaptive deinterlacing for signals up to 1080i
- Shall provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze control
- Shall support upload and placement of a custom logo graphic at any position on the video output
- Shall support logo placement as a foreground image
- Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
- Shall support displaying full screen images up to 4096x2160 resolution
- Shall support up to 16 logo presets
- Shall support keying with selectable effects including transparency, color key, level key, and alpha key
- Shall provide a low power standby state selectable via Ethernet or USB
- Shall support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Shall support selection of output color space as RGB or component video
- Two (2) switched video output channels
- Video output connections
- Video Switching requirements
- Shall provide video matrix switching between any input and any output
- Shall support routing of scaled 4K or UHD video signals to all outputs
- Shall provide selectable transition effects when switching inputs
- Seamless Cut: video output shall freeze, then cut to the newly selected input source
- Seamless Fade: video output shall freeze, then fade into the newly selected input source
- Cut through black: video output shall cut to black, then cut to the newly selected input source
- Fade through black: video output shall fade to black, then fade into the newly selected input source
- Shall provide video matrix switching between any input and any output
- USB data and switching requirements
- USB host connections
- One (1) USB-C, shared with video input 1
- Two (2) USB type B
- Shall support data transfer rates up to USB 10Gbps
- Connections at four-port USB device hub
- Two (2) USB type A
- Shall support transfer rates up to 10 Gbps
- Two (2) USB type A
- Shall support transfer rates up to 480 Mbps
- Two (2) USB type A
- USB extension requirements
- Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
- Shall support transfer rates up to 480 Mbps
- USB host switching requirements
- USB host switching shall be independent of video switching
- Local 10 Gbps device ports shall always follow the selected host
- Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
- USB host connections
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Shall provide a set of pre-stored EDID files
- Shall support capture of EDID from any connected display
- Shall support user uploading of custom-generated EDID files
- Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Shall provide automatic EDID management between connected devices
- HDCP requirements
- The unit shall be HDCP 2.3 compliant
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
- Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When enabled, the option shall be provided to display a user-provided image in place of the green video output
- When disabled, the output shall be muted
- Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
- The unit shall be HDCP 2.3 compliant
- Audio requirements
- Audio input connections
- One (1) USB-C, embedded
- Three (3) HDMI, embedded
- Audio output connections
- One (1) simultaneous DTP3 and HDMI, embedded
- One (1) separately switched HDMI, embedded
- One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
- Shall support storage and playback of up to 16 audio files
- Audio input connections
- Control/remote - RS-232 pass-through over shielded CAT 6A requirements
- Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
- Control/remote - switcher requirements
- Control connections
- One (1) RJ-45: 10/100/1000Base-T Ethernet
- One (1) USB-C: USB 2.0
- Shall provide alternatives for configuration and operation
- Front panel controls
- Built-in Web pages accessible using a standard Web browser via Ethernet connection
- Product configuration software connected via Ethernet, or USB
- Serial commands sent over Ethernet or USB connection
- Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Control connections
- Power requirements
- Shall support USB-C device charging up to 60 watts
- Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
- Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
- General requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals
DTP3 T CrossPoint 42
- Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
- Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
- Video input requirements
- Video input connections
- One (1) USB-C for digital video signals
- Shall support USB-C sources with DisplayPort Alt Mode
- Three (3) HDMI inputs for digital video signals
- Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
- One (1) USB-C for digital video signals
- Shall provide automatic 3:2 and 2:2 pulldown detection
- Video input connections
- Video output requirements
- Video output connections
- Two (2) switched video output channels
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
- DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
- DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
- DTP3 output shall be configurable for compatibility with
- Extron DTP inputs
- Extron DTP3 inputs
- HDBaseT inputs
- DTP3 and HDMI outputs shall support simultaneous content for local monitoring
- One (1) HDMI
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
- Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
- Shall provide motion adaptive deinterlacing for signals up to 1080i
- Shall provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze control
- Shall support upload and placement of a custom logo graphic at any position on the video output
- Shall support logo placement as a foreground image
- Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
- Shall support displaying full screen images up to 4096x2160 resolution
- Shall support up to 16 logo presets
- Shall support keying with selectable effects including transparency, color key, level key, and alpha key
- Shall provide a low power standby state selectable via Ethernet or USB
- Shall support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Shall support selection of output color space as RGB or component video
- Two (2) switched video output channels
- Video output connections
- Video Switching requirements
- Shall provide video matrix switching between any input and any output
- Shall support routing of scaled 4K or UHD video signals to all outputs
- Shall provide selectable transition effects when switching inputs
- Seamless Cut: video output shall freeze, then cut to the newly selected input source
- Seamless Fade: video output shall freeze, then fade into the newly selected input source
- Cut through black: video output shall cut to black, then cut to the newly selected input source
- Fade through black: video output shall fade to black, then fade into the newly selected input source
- Shall provide video matrix switching between any input and any output
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Shall provide a set of pre-stored EDID files
- Shall support capture of EDID from any connected display
- Shall support user uploading of custom-generated EDID files
- Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Shall provide automatic EDID management between connected devices
- HDCP requirements
- The unit shall be HDCP 2.3 compliant
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
- Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When enabled, the option shall be provided to display a user-provided image in place of the green video output
- When disabled, the output shall be muted
- Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
- The unit shall be HDCP 2.3 compliant
- Audio requirements
- Audio input connections
- One (1) USB-C, embedded
- Three (3) HDMI, embedded
- Audio output connections
- One (1) simultaneous DTP3 and HDMI, embedded
- One (1) separately switched HDMI, embedded
- One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
- Shall support storage and playback of up to 16 audio files
- Audio input connections
- Control/remote - RS-232 pass-through over shielded CAT 6A requirements
- Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
- Control/remote - switcher requirements
- Control connections
- One (1) RJ-45: 10/100/1000Base-T Ethernet
- One (1) USB-C: USB 2.0
- Shall provide alternatives for configuration and operation
- Front panel controls
- Built-in Web pages accessible using a standard Web browser via Ethernet connection
- Product configuration software connected via Ethernet, or USB
- Serial commands sent over Ethernet or USB connection
- Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Control connections
- Power requirements
- Shall support USB-C device charging up to 60 watts
- Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
- Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
- General requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals
DTP3 T CrossPoint 42
- Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
- Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
- Video input requirements
- Video input connections
- One (1) USB-C for digital video signals
- Shall support USB-C sources with DisplayPort Alt Mode
- Three (3) HDMI inputs for digital video signals
- Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
- One (1) USB-C for digital video signals
- Shall provide automatic 3:2 and 2:2 pulldown detection
- Video input connections
- Video output requirements
- Video output connections
- Two (2) switched video output channels
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
- DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
- DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
- DTP3 output shall be configurable for compatibility with
- Extron DTP inputs
- Extron DTP3 inputs
- HDBaseT inputs
- DTP3 and HDMI outputs shall support simultaneous content for local monitoring
- One (1) HDMI
- One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
- Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
- Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
- Shall provide motion adaptive deinterlacing for signals up to 1080i
- Shall provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze control
- Shall support upload and placement of a custom logo graphic at any position on the video output
- Shall support logo placement as a foreground image
- Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
- Shall support displaying full screen images up to 4096x2160 resolution
- Shall support up to 16 logo presets
- Shall support keying with selectable effects including transparency, color key, level key, and alpha key
- Shall provide a low power standby state selectable via Ethernet or USB
- Shall support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Shall support selection of output color space as RGB or component video
- Two (2) switched video output channels
- Video output connections
- Video Switching requirements
- Shall provide video matrix switching between any input and any output
- Shall support routing of scaled 4K or UHD video signals to all outputs
- Shall provide selectable transition effects when switching inputs
- Seamless Cut: video output shall freeze, then cut to the newly selected input source
- Seamless Fade: video output shall freeze, then fade into the newly selected input source
- Cut through black: video output shall cut to black, then cut to the newly selected input source
- Fade through black: video output shall fade to black, then fade into the newly selected input source
- Shall provide video matrix switching between any input and any output
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Shall provide a set of pre-stored EDID files
- Shall support capture of EDID from any connected display
- Shall support user uploading of custom-generated EDID files
- Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Shall provide automatic EDID management between connected devices
- HDCP requirements
- The unit shall be HDCP 2.3 compliant
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
- Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When enabled, the option shall be provided to display a user-provided image in place of the green video output
- When disabled, the output shall be muted
- Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
- The unit shall be HDCP 2.3 compliant
- Audio requirements
- Audio input connections
- One (1) USB-C, embedded
- Three (3) HDMI, embedded
- Audio output connections
- One (1) simultaneous DTP3 and HDMI, embedded
- One (1) separately switched HDMI, embedded
- One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
- Shall support storage and playback of up to 16 audio files
- Audio input connections
- Control/remote - RS-232 pass-through over shielded CAT 6A requirements
- Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
- Control/remote - switcher requirements
- Control connections
- One (1) RJ-45: 10/100/1000Base-T Ethernet
- One (1) USB-C: USB 2.0
- Shall provide alternatives for configuration and operation
- Front panel controls
- Built-in Web pages accessible using a standard Web browser via Ethernet connection
- Product configuration software connected via Ethernet, or USB
- Serial commands sent over Ethernet or USB connection
- Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Control connections
- Power requirements
- Shall support USB-C device charging up to 60 watts
- Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
- Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
- General requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari