最近閲覧した製品
FOX USB Extender Plus
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
FOX T USB Extender Plus MM
- Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
- Long distance signal extension for USB peripherals over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals
FOX T USB Extender Plus MM
- Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
- Long distance signal extension for USB peripherals over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals
FOX R USB Extender Plus MM
- Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
- Long distance signal extension for USB peripherals over fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals
FOX R USB Extender Plus MM
- Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
- Long distance signal extension for USB peripherals over fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals
FOX T USB Extender Plus SM
- Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
- Long distance signal extension for USB peripherals over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals
FOX T USB Extender Plus SM
- Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
- Long distance signal extension for USB peripherals over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals
FOX R USB Extender Plus SM
- Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
- Long distance signal extension for USB peripherals over fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals
FOX R USB Extender Plus SM
- Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
- Long distance signal extension for USB peripherals over fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals
FOX T USB Extender Plus HID MM
- Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals
FOX T USB Extender Plus HID MM
- Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals
FOX R USB Extender Plus HID MM
- Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals
FOX R USB Extender Plus HID MM
- Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
- Provide 5 Volts, 500 mA on each port to power a peripheral device
- Provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals
FOX T USB Extender Plus HID SM
- Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals
FOX T USB Extender Plus HID SM
- Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
- USB input requirements
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
- Provide the capability to configure the unit with peripheral emulation disabled
- Shall support USB 2.0, 1.1, or 1.0 hosts
- Shall support USB 3.0 hosts that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide one (1) USB Type B connector on the rear panel for host computer
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, and host status
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals
FOX R USB Extender Plus HID SM
- Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Shall provide 5 Volts, 500 mA on each port to power a peripheral device
- Shall provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals
FOX R USB Extender Plus HID SM
- Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
- Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
- USB output requirements
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Shall provide 5 Volts, 500 mA on each port to power a peripheral device
- Shall provide the capability to charge a peripheral device that is connected to a hub port
- Shall support USB 2.0, 1.1, or 1.0 devices
- Shall support USB 3.0 devices that can operate at USB 2.0 rates
- Shall support data transfer rates up to 480 Mbps
- Shall provide device class filtering to recognize only authorized device types
- Allow connection of HID and smart card reader device classes only
- Prevent connection of unauthorized hardware, such as a storage device
- Factory-configured to ensure device class filtering cannot be removed or altered in the field
- Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors on rear panel
- Transmission requirement
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
- Power requirements
- Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
- Shall be rack mountable with optional rack shelf or rack mounting brackets
- Shall be wall or furniture mountable with optional mounting kits
- Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
- Shall provide LED indicators on rear panel for link status
- Shall meet regulatory compliances
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
- Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

FOX USB Extender Plus
USB用光ファイバーエクステンダー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。