最近閲覧した製品
SB 33 A
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
SB 33 A
- Provide a powered, adjustable-width, wall-mountable stereo sound bar, that shall accommodate internal mounting of a webcam and options for PTZ camera mounting, use with no camera, and VESA mounting
- Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
- Internal Driver Requirements
- Shall consist of two 3” (76.2 mm) full-range, paper cone drivers
- Internal Amplifier Requirements
- Input Requirements
- Shall support one stereo, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector with a maximum level of +12 dBu (balanced) at 1% THD+N
- Shall support one stereo, unbalanced signal on one pair of RCA connectors with a maximum level of +7 dBu at 1% THD+N
- Shall support one stereo, unbalanced signal on one 3.5 mm mini jack (tip, ring, sleeve) with a maximum level of +7 dBu at 1% THD+N
- Shall have an input impedance of >10k ohms unbalanced/balanced, DC coupled
- Shall have a balanced input sensitivity of -8 dBu
- Shall have an unbalanced input sensitivity of -16 dBV
- Output Requirements
- Shall provide a signal-to-noise ratio of >90 dB, at maximum output (15 dBu), balanced (unweighted)
- Amplifier Requirements
- Shall utilize an efficient Class D amplifier design
- Shall provide Class D Ripple Suppression technology
- Shall be convection cooled and operate without fans
- Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
- Shall provide a level adjustment
- Shall provide a bass adjustment of +/- 10 dB at 80 Hz
- Shall provide a treble adjustment of +/- 10 dB at 10 kHz
- Power Requirements
- Shall be Ecofficient Level 3 qualified
- Shall draw 9.1 watts during 1/8 power operation with both output channels driven
- Shall draw 3.7 watts during quiescent operation
- Shall provide a low power standby mode
- Input Requirements
- Internal Driver Requirements
- Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
- Shall enter standby mode after 25 minutes of inactivity (+/- 5 minutes)
- Shall draw less than 1 watt while in standby mode
- Shall return to full power status in less than one second upon signal detection while in standby mode
- Shall feature an input signal detection threshold of -55 dBV, +/- 3 dB on unbalanced RCA and 3.5 mm stereo mini jack inputs to deactivate standby mode
- Shall feature an input signal detection threshold of -46 dBu, +/- 3 dB on balanced captive screw connector input to deactivate standby mode
- Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
- Audio Requirements
- Shall provide a frequency range of 100 Hz to 20 kHz, -10dB, full space (per IEC 60268-5) when the bass and treble adjustments are set to their 12 o’clock positions
- Shall provide a calculated maximum SPL of 95 dB at 1 meter
- Shall provide nominal coverage angles
- Horizontal: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
- Vertical: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
- Control Requirements
- Shall support remote control of volume and muting on one 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
- Enclosure Requirements
- Shall consist of a metal, rectangular enclosure with metal grille
- Shall have a black finish
- Mounting Requirements
- Shall include a wall bracket for horizontal flush with wall installation
- Wall bracket shall include a bubble level
- Wall bracket shall have a black finish to match sound bar
- Shall include a wall bracket for horizontal flush with wall installation
- General Requirements
- Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
- For 46 inch to 55 inch displays
- For 55 inch to 65 inch displays
- For 65 inch to 70 inch displays
- For 75 inch to 80 inch displays
- For 82 inch to 90 inch displays
- For 90 inch to 100 inch displays
- Shall provide a 9 inch range of width adjustability
- Shall measure 6” (15.3 cm) in height
- Shall protrude no more than 4.0” (10.2 cm) into environment from mounting surface
- Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits
- Shall support use of an optional VESA mounting kit
- Approved optional VESA mounting kit for 46 inch to 80 inch displays shall be the Extron SMK V SB 33 Plus, part number 70-1192-02, no alternatives or equals
- Approved optional VESA mounting kit for 82 inch to 100 inch displays shall be the Extron SMK V SB 33 82-100, part number 70-1192-03, no alternatives or equals
- Shall support use of an optional shelf for mounting a PTZ camera
- Approved optional shelf for mounting a PTZ camera shall be the Extron SAK PTZ SB 33, part number 70-1260-01, no alternatives or equals
- Shall support use of an optional blank center grille
- Approved optional blank center grille shall be the Extron SAK BCG SB 33, part number 70-1229-01, no alternatives or equals
- Shall meet regulatory compliances: CE, CEC, CISPR 22 Class B, C-tick, European Code of Conduct, FCC Class B, ICES, RoHS, UL, CUL, VCCI Class B
- Shall provide a five year parts and labor product warranty
- Shall provide a seven year parts and labor Everlast power supply warranty
- Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
- Audio Requirements
- Approved device shall be the Extron SB 33 A, part numbers 60-1737-11, 60-1737-12, 60-1737-13, 60-1737-14, 60-1737-15, 60-1737-16; no alternatives or equals
- Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
SB 33 A
- Provide a powered, adjustable-width, wall-mountable stereo sound bar, that shall accommodate internal mounting of a webcam and options for PTZ camera mounting, use with no camera, and VESA mounting
- Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
- Internal Driver Requirements
- Shall consist of two 3” (76.2 mm) full-range, paper cone drivers
- Internal Amplifier Requirements
- Input Requirements
- Shall support one stereo, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector with a maximum level of +12 dBu (balanced) at 1% THD+N
- Shall support one stereo, unbalanced signal on one pair of RCA connectors with a maximum level of +7 dBu at 1% THD+N
- Shall support one stereo, unbalanced signal on one 3.5 mm mini jack (tip, ring, sleeve) with a maximum level of +7 dBu at 1% THD+N
- Shall have an input impedance of >10k ohms unbalanced/balanced, DC coupled
- Shall have a balanced input sensitivity of -8 dBu
- Shall have an unbalanced input sensitivity of -16 dBV
- Output Requirements
- Shall provide a signal-to-noise ratio of >90 dB, at maximum output (15 dBu), balanced (unweighted)
- Amplifier Requirements
- Shall utilize an efficient Class D amplifier design
- Shall provide Class D Ripple Suppression technology
- Shall be convection cooled and operate without fans
- Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
- Shall provide a level adjustment
- Shall provide a bass adjustment of +/- 10 dB at 80 Hz
- Shall provide a treble adjustment of +/- 10 dB at 10 kHz
- Power Requirements
- Shall be Ecofficient Level 3 qualified
- Shall draw 9.1 watts during 1/8 power operation with both output channels driven
- Shall draw 3.7 watts during quiescent operation
- Shall provide a low power standby mode
- Input Requirements
- Internal Driver Requirements
- Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
- Shall enter standby mode after 25 minutes of inactivity (+/- 5 minutes)
- Shall draw less than 1 watt while in standby mode
- Shall return to full power status in less than one second upon signal detection while in standby mode
- Shall feature an input signal detection threshold of -55 dBV, +/- 3 dB on unbalanced RCA and 3.5 mm stereo mini jack inputs to deactivate standby mode
- Shall feature an input signal detection threshold of -46 dBu, +/- 3 dB on balanced captive screw connector input to deactivate standby mode
- Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
- Audio Requirements
- Shall provide a frequency range of 100 Hz to 20 kHz, -10dB, full space (per IEC 60268-5) when the bass and treble adjustments are set to their 12 o’clock positions
- Shall provide a calculated maximum SPL of 95 dB at 1 meter
- Shall provide nominal coverage angles
- Horizontal: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
- Vertical: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
- Control Requirements
- Shall support remote control of volume and muting on one 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
- Enclosure Requirements
- Shall consist of a metal, rectangular enclosure with metal grille
- Shall have a black finish
- Mounting Requirements
- Shall include a wall bracket for horizontal flush with wall installation
- Wall bracket shall include a bubble level
- Wall bracket shall have a black finish to match sound bar
- Shall include a wall bracket for horizontal flush with wall installation
- General Requirements
- Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
- For 46 inch to 55 inch displays
- For 55 inch to 65 inch displays
- For 65 inch to 70 inch displays
- For 75 inch to 80 inch displays
- For 82 inch to 90 inch displays
- For 90 inch to 100 inch displays
- Shall provide a 9 inch range of width adjustability
- Shall measure 6” (15.3 cm) in height
- Shall protrude no more than 4.0” (10.2 cm) into environment from mounting surface
- Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits
- Shall support use of an optional VESA mounting kit
- Approved optional VESA mounting kit for 46 inch to 80 inch displays shall be the Extron SMK V SB 33 Plus, part number 70-1192-02, no alternatives or equals
- Approved optional VESA mounting kit for 82 inch to 100 inch displays shall be the Extron SMK V SB 33 82-100, part number 70-1192-03, no alternatives or equals
- Shall support use of an optional shelf for mounting a PTZ camera
- Approved optional shelf for mounting a PTZ camera shall be the Extron SAK PTZ SB 33, part number 70-1260-01, no alternatives or equals
- Shall support use of an optional blank center grille
- Approved optional blank center grille shall be the Extron SAK BCG SB 33, part number 70-1229-01, no alternatives or equals
- Shall meet regulatory compliances: CE, CEC, CISPR 22 Class B, C-tick, European Code of Conduct, FCC Class B, ICES, RoHS, UL, CUL, VCCI Class B
- Shall provide a five year parts and labor product warranty
- Shall provide a seven year parts and labor Everlast power supply warranty
- Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
- Audio Requirements
- Approved device shall be the Extron SB 33 A, part numbers 60-1737-11, 60-1737-12, 60-1737-13, 60-1737-14, 60-1737-15, 60-1737-16; no alternatives or equals
- Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
DAC 102
- Provide a digital to analog audio converter that shall support two digital audio input channels and two analog audio output channels.
- Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
- Input Requirements
- Shall support two uncompressed PCM digital audio signals on coaxial and TOSLINK connectors
- Output Requirements
- Shall support two balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
- Control Requirements
- Shall support remote control of volume and muting on 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
- Front Panel Requirements
- Shall provide a green LED for power indication
- Shall provide a TOSLINK connector for S/PDIF digital audio input
- Shall provide a green LED for TOSLINK signal present indication
- Shall provide a coaxial connector for S/PDIF digital audio input
- Shall provide a green LED for coaxial signal present indication
- Rear Panel Requirements
- Shall provide a female USB mini type B port for software control and power
- Shall provide two analog audio outputs on one 5-pole, 3.5 mm captive screw connector
- Shall provide remote volume and mute control port on one 3-pole, 3.5 mm captive screw connector
- General Requirements
- Shall support 5 VDC power on a USB mini type B port from an external power source
- Shall include an Extron ZipClip™ 25 mounting bracket
- Shall meet regulatory compliances
- CE, C-tick, FCC Class B, ICES, VCCI, RoHS, WEEE
- Shall provide a three year parts and labor warranty
- Input Requirements
- Approved device shall be the Extron DAC 102, part number 60-1811-01; no alternates or equals.
- Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
DAC 102
- Provide a digital to analog audio converter that shall support two digital audio input channels and two analog audio output channels.
- Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
- Input Requirements
- Shall support two uncompressed PCM digital audio signals on coaxial and TOSLINK connectors
- Output Requirements
- Shall support two balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
- Control Requirements
- Shall support remote control of volume and muting on 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
- Front Panel Requirements
- Shall provide a green LED for power indication
- Shall provide a TOSLINK connector for S/PDIF digital audio input
- Shall provide a green LED for TOSLINK signal present indication
- Shall provide a coaxial connector for S/PDIF digital audio input
- Shall provide a green LED for coaxial signal present indication
- Rear Panel Requirements
- Shall provide a female USB mini type B port for software control and power
- Shall provide two analog audio outputs on one 5-pole, 3.5 mm captive screw connector
- Shall provide remote volume and mute control port on one 3-pole, 3.5 mm captive screw connector
- General Requirements
- Shall support 5 VDC power on a USB mini type B port from an external power source
- Shall include an Extron ZipClip™ 25 mounting bracket
- Shall meet regulatory compliances
- CE, C-tick, FCC Class B, ICES, VCCI, RoHS, WEEE
- Shall provide a three year parts and labor warranty
- Input Requirements
- Approved device shall be the Extron DAC 102, part number 60-1811-01; no alternates or equals.
- Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:

Chrome
Firefox
Edge
Safari