最近閲覧した製品
PowerCage FOX Tx DVI Plus
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
PowerCage FOX Tx DVI Plus MM
- Provide a fiber optic transmitter on a double-slot board that shall support the long-haul transmission of single-link DVI video, stereo audio, and RS-232 control
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of video, audio, and control over multimode fiber optic cabling
- Video input requirements
- Shall provide one (1) female DVI-I connector for digital video signals
- Shall support computer and video resolutions up to 1920x1200, including 1080p @ 60 Hz
- Audio input requirements
- Shall provide one (1) 3.5 mm five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio gain and attenuation adjustment capability
- EDID communication requirements
- Shall provide EDID Emulation to ensure reliable operation
- Selectable resolution
- Selectable refresh rate of incoming signal
- Shall provide EDID Emulation to ensure reliable operation
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- RS-232 pass-through from the RS-232 port onto the fiber for communicating with a remote device or control system
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- Interconnection requirements
- Shall provide interconnection between transmitter board and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors panel for interconnection between transmitter board and receiver
- Shall support unidirectional video, audio, and control signal extension with one (1) fiber installed between the transmitter board and receiver
- Shall support bidirectional control signal extension with two (2) fibers installed between the transmitter board and receiver
- Second fiber provides return data connection from receiver to transmitter board
- Transmission requirements
- Shall support extension of video, audio, and control signals over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for setup, control, and configuration
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicator for power
- Shall provide visual signal on LED indicators for link status
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall support the use of DVI-D to HDMI cables or adapters for HDMI signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA receivers
- Shall be compatible with Extron FOX II Series DisplayPort receivers
- Shall be compatible with Extron FOX Series matrix switchers for signal distribution systems up to 1000x1000 and larger
- Shall be compatible with Extron FOX Series distribution amplifiers
- Approved device shall be the Extron PowerCage FOX Tx DVI Plus MM (70-873-11); no alternates or equals
PowerCage FOX Tx DVI Plus MM
- Provide a fiber optic transmitter on a double-slot board that shall support the long-haul transmission of single-link DVI video, stereo audio, and RS-232 control
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of video, audio, and control over multimode fiber optic cabling
- Video input requirements
- Shall provide one (1) female DVI-I connector for digital video signals
- Shall support computer and video resolutions up to 1920x1200, including 1080p @ 60 Hz
- Audio input requirements
- Shall provide one (1) 3.5 mm five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio gain and attenuation adjustment capability
- EDID communication requirements
- Shall provide EDID Emulation to ensure reliable operation
- Selectable resolution
- Selectable refresh rate of incoming signal
- Shall provide EDID Emulation to ensure reliable operation
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- RS-232 pass-through from the RS-232 port onto the fiber for communicating with a remote device or control system
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- Interconnection requirements
- Shall provide interconnection between transmitter board and receiver over multimode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors panel for interconnection between transmitter board and receiver
- Shall support unidirectional video, audio, and control signal extension with one (1) fiber installed between the transmitter board and receiver
- Shall support bidirectional control signal extension with two (2) fibers installed between the transmitter board and receiver
- Second fiber provides return data connection from receiver to transmitter board
- Transmission requirements
- Shall support extension of video, audio, and control signals over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for setup, control, and configuration
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicator for power
- Shall provide visual signal on LED indicators for link status
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall support the use of DVI-D to HDMI cables or adapters for HDMI signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA receivers
- Shall be compatible with Extron FOX II Series DisplayPort receivers
- Shall be compatible with Extron FOX Series matrix switchers for signal distribution systems up to 1000x1000 and larger
- Shall be compatible with Extron FOX Series distribution amplifiers
- Approved device shall be the Extron PowerCage FOX Tx DVI Plus MM (70-873-11); no alternates or equals
PowerCage FOX Tx DVI Plus SM
- Provide a fiber optic transmitter on a double-slot board that shall support the long-haul transmission of single-link DVI video, stereo audio, and RS-232 control
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of video, audio, and control over singlemode fiber optic cabling
- Video input requirements
- Shall provide one (1) female DVI-I connector for digital video signals
- Shall support computer and video resolutions up to 1920x1200, including 1080p @ 60 Hz
- Audio input requirements
- Shall provide one (1) 3.5 mm five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio gain and attenuation adjustment capability
- EDID communication requirements
- Shall provide EDID Emulation to ensure reliable operation
- Selectable resolution
- Selectable refresh rate of incoming signal
- Shall provide EDID Emulation to ensure reliable operation
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- RS-232 pass-through from the RS-232 port onto the fiber for communicating with a remote device or control system
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- Interconnection requirements
- Shall provide interconnection between transmitter board and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors panel for interconnection between transmitter board and receiver
- Shall support unidirectional video, audio, and control signal extension with one (1) fiber installed between the transmitter board and receiver
- Shall support bidirectional control signal extension with two (2) fibers installed between the transmitter board and receiver
- Second fiber provides return data connection from receiver to transmitter board
- Transmission requirements
- Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for setup, control, and configuration
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicator for power
- Shall provide visual signal on LED indicators for link status
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall support the use of DVI-D to HDMI cables or adapters for HDMI signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA receivers
- Shall be compatible with Extron FOX II Series DisplayPort receivers
- Shall be compatible with Extron FOX Series matrix switchers for signal distribution systems up to 1000x1000 and larger
- Shall be compatible with Extron FOX Series distribution amplifiers
- Approved device shall be the Extron PowerCage FOX Tx DVI Plus SM (70-873-12); no alternates or equals
PowerCage FOX Tx DVI Plus SM
- Provide a fiber optic transmitter on a double-slot board that shall support the long-haul transmission of single-link DVI video, stereo audio, and RS-232 control
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of video, audio, and control over singlemode fiber optic cabling
- Video input requirements
- Shall provide one (1) female DVI-I connector for digital video signals
- Shall support computer and video resolutions up to 1920x1200, including 1080p @ 60 Hz
- Audio input requirements
- Shall provide one (1) 3.5 mm five-pole captive screw connector for balanced/unbalanced audio
- Shall provide audio gain and attenuation adjustment capability
- EDID communication requirements
- Shall provide EDID Emulation to ensure reliable operation
- Selectable resolution
- Selectable refresh rate of incoming signal
- Shall provide EDID Emulation to ensure reliable operation
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- RS-232 pass-through from the RS-232 port onto the fiber for communicating with a remote device or control system
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for controlling a local or remote device
- Interconnection requirements
- Shall provide interconnection between transmitter board and receiver over singlemode fiber optic cabling
- Shall provide two (2) LC-type fiber optic connectors panel for interconnection between transmitter board and receiver
- Shall support unidirectional video, audio, and control signal extension with one (1) fiber installed between the transmitter board and receiver
- Shall support bidirectional control signal extension with two (2) fibers installed between the transmitter board and receiver
- Second fiber provides return data connection from receiver to transmitter board
- Transmission requirements
- Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 port using three pins of a five-pole captive screw connector for setup, control, and configuration
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicator for power
- Shall provide visual signal on LED indicators for link status
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall support the use of DVI-D to HDMI cables or adapters for HDMI signals
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA receivers
- Shall be compatible with Extron FOX II Series DisplayPort receivers
- Shall be compatible with Extron FOX Series matrix switchers for signal distribution systems up to 1000x1000 and larger
- Shall be compatible with Extron FOX Series distribution amplifiers
- Approved device shall be the Extron PowerCage FOX Tx DVI Plus SM (70-873-12); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

PowerCage FOX Tx DVI Plus
DVI-D、オーディオおよびRS-232用光ファイバートランスミッター
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。