NAV E 201 D
1G Pro AV Over IPエンコーダー - HDMI – Decorator型ウォールプレート
NAV E 201 D
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
NAV E 201 D (Black)
- Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
- Provide one 2-pole captive screw connector for 12VDC power
- Provide ten LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- Stream LED on front panel to indicate streaming status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on front panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
- Maintain continuous HDCP encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI-embedded audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
- Support RTP transport type per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support Diffserv QoS with DSCP and Precedence Values
- Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be mountable in a standard triple-gang electrical box
- Approved device shall be the Extron NAV E 201 D (Black) (60-1525-05; no alternates or equals).
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
NAV E 201 D (Black)
- Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
- Provide one 2-pole captive screw connector for 12VDC power
- Provide ten LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- Stream LED on front panel to indicate streaming status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on front panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
- Maintain continuous HDCP encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI-embedded audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
- Support RTP transport type per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support Diffserv QoS with DSCP and Precedence Values
- Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be mountable in a standard triple-gang electrical box
- Approved device shall be the Extron NAV E 201 D (Black) (60-1525-05; no alternates or equals).
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
NAV E 201 D (White)
- Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
- Provide one 2-pole captive screw connector for 12VDC power
- Provide ten LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- Stream LED on front panel to indicate streaming status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on front panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
- Maintain continuous HDCP encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI-embedded audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
- Support RTP transport type per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support Diffserv QoS with DSCP and Precedence Values
- Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be mountable in a standard triple-gang electrical box
- Approved device shall be the Extron NAV E 201 D (White) (60-1525-06; no alternates or equals).
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
NAV E 201 D (White)
- Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
- Provide one 2-pole captive screw connector for 12VDC power
- Provide ten LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- Stream LED on front panel to indicate streaming status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on front panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
- Maintain continuous HDCP encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI-embedded audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
- Support RTP transport type per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support Diffserv QoS with DSCP and Precedence Values
- Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be mountable in a standard triple-gang electrical box
- Approved device shall be the Extron NAV E 201 D (White) (60-1525-06; no alternates or equals).
- Three-gang decorator-style wallplate that encodes video and audio, and shall:
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari