NAV E 511
1G光ファイバーPro AV over IPエンコーダー - HDMI、イーサネット、USB
最近閲覧した製品
NAV E 511
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
NAV E 511 (multimode)
- Provide a Pro AV over IP encoder that shall stream ultra-low latency, high quality video, audio, Ethernet, and USB 2.0 signals over a 1 Gbps fiber optic Ethernet interface
- Encode video, audio, Ethernet, and USB 2.0, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 2-pole captive screw connector for Contact closure and Tally output
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC/LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 550 meters (1804 feet)
- LC/LC interface shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide nineteen LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio input status
- Analog audio LED on front panel to indicate analog audio input status
- NAV Stream LED on front panel to indicate streaming status
- NAV USB LED on front panel to indicate streaming status
- USB Host LED on front panel to indicate mode
- USB Active LED on front panel to indicate activity
- Two LAN LEDs on front panel to indicate the NAV network link status and activity
- Two LAN EXT LEDs on front panel to indicate the Ethernet Expansion link status and activity
- ID LED on front panel for visual confirmation of units on the network
- Two LAN LEDs on back panel to indicate the NAV network link status and activity
- Two LAN LEDs on back panel RJ-45 jack to indicate the Ethernet Expansion link status and activity
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Provide a USB Type-C interface configurable as Host or Hub for USB 1.1, 2.0, and USB 3.0 peripherals that operate at USB 2.0 rates up to 480 Mbps.
- Support audio streaming between encoder and decoder
- Support streaming of HDCP 2.3 encrypted sources to decoders connected to HDCP 2.3 compliant displays
- Maintain continuous HDCP encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160 with 4:4:4 chroma sampling
- Support a low latency encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and 3376
- Support RTP Real-time Transport Protocol per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio and USB breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support DiffServ QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of video to 10 Gbps decoders in mixed 1/10 Gbps systems
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV E 511 (60-1958-05; no alternates or equals).
- Encode video, audio, Ethernet, and USB 2.0, and shall:
NAV E 511 (multimode)
- Provide a Pro AV over IP encoder that shall stream ultra-low latency, high quality video, audio, Ethernet, and USB 2.0 signals over a 1 Gbps fiber optic Ethernet interface
- Encode video, audio, Ethernet, and USB 2.0, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 2-pole captive screw connector for Contact closure and Tally output
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC/LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 550 meters (1804 feet)
- LC/LC interface shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide nineteen LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio input status
- Analog audio LED on front panel to indicate analog audio input status
- NAV Stream LED on front panel to indicate streaming status
- NAV USB LED on front panel to indicate streaming status
- USB Host LED on front panel to indicate mode
- USB Active LED on front panel to indicate activity
- Two LAN LEDs on front panel to indicate the NAV network link status and activity
- Two LAN EXT LEDs on front panel to indicate the Ethernet Expansion link status and activity
- ID LED on front panel for visual confirmation of units on the network
- Two LAN LEDs on back panel to indicate the NAV network link status and activity
- Two LAN LEDs on back panel RJ-45 jack to indicate the Ethernet Expansion link status and activity
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Provide a USB Type-C interface configurable as Host or Hub for USB 1.1, 2.0, and USB 3.0 peripherals that operate at USB 2.0 rates up to 480 Mbps.
- Support audio streaming between encoder and decoder
- Support streaming of HDCP 2.3 encrypted sources to decoders connected to HDCP 2.3 compliant displays
- Maintain continuous HDCP encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160 with 4:4:4 chroma sampling
- Support a low latency encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and 3376
- Support RTP Real-time Transport Protocol per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio and USB breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support DiffServ QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of video to 10 Gbps decoders in mixed 1/10 Gbps systems
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV E 511 (60-1958-05; no alternates or equals).
- Encode video, audio, Ethernet, and USB 2.0, and shall:
NAV E 511 (singlemode)
- Provide a Pro AV over IP encoder that shall stream ultra-low latency, high quality video, audio, Ethernet, and USB 2.0 signals over a 1 Gbps fiber optic Ethernet interface
- Encode video, audio, Ethernet, and USB 2.0, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 2-pole captive screw connector for Contact closure and Tally output
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC/LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 10 kilometers (6.25 miles)
- LC/LC interface shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide nineteen LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio input status
- Analog audio LED on front panel to indicate analog audio input status
- NAV Stream LED on front panel to indicate streaming status
- NAV USB LED on front panel to indicate streaming status
- USB Host LED on front panel to indicate mode
- USB Active LED on front panel to indicate activity
- Two LAN LEDs on front panel to indicate the NAV network link status and activity
- Two LAN EXT LEDs on front panel to indicate the Ethernet Expansion link status and activity
- ID LED on front panel for visual confirmation of units on the network
- Two LAN LEDs on back panel to indicate the NAV network link status and activity
- Two LAN LEDs on back panel RJ-45 jack to indicate the Ethernet Expansion link status and activity
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Provide a USB Type-C interface configurable as Host or Hub for USB 1.1, 2.0, and USB 3.0 peripherals that operate at USB 2.0 rates up to 480 Mbps.
- Support audio streaming between encoder and decoder
- Support streaming of HDCP 2.3 encrypted sources to decoders connected to HDCP 2.3 compliant displays
- Maintain continuous HDCP encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160 with 4:4:4 chroma sampling
- Support a low latency encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and 3376
- Support RTP Real-time Transport Protocol per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio and USB breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support DiffServ QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of video to 10 Gbps decoders in mixed 1/10 Gbps systems
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV E 511 (60-1958-06; no alternates or equals).
- Encode video, audio, Ethernet, and USB 2.0, and shall:
NAV E 511 (singlemode)
- Provide a Pro AV over IP encoder that shall stream ultra-low latency, high quality video, audio, Ethernet, and USB 2.0 signals over a 1 Gbps fiber optic Ethernet interface
- Encode video, audio, Ethernet, and USB 2.0, and shall:
- Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 2-pole captive screw connector for Contact closure and Tally output
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC/LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 10 kilometers (6.25 miles)
- LC/LC interface shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide nineteen LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- HDMI LED on front panel to indicate HDMI input signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio input status
- Analog audio LED on front panel to indicate analog audio input status
- NAV Stream LED on front panel to indicate streaming status
- NAV USB LED on front panel to indicate streaming status
- USB Host LED on front panel to indicate mode
- USB Active LED on front panel to indicate activity
- Two LAN LEDs on front panel to indicate the NAV network link status and activity
- Two LAN EXT LEDs on front panel to indicate the Ethernet Expansion link status and activity
- ID LED on front panel for visual confirmation of units on the network
- Two LAN LEDs on back panel to indicate the NAV network link status and activity
- Two LAN LEDs on back panel RJ-45 jack to indicate the Ethernet Expansion link status and activity
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Provide a USB Type-C interface configurable as Host or Hub for USB 1.1, 2.0, and USB 3.0 peripherals that operate at USB 2.0 rates up to 480 Mbps.
- Support audio streaming between encoder and decoder
- Support streaming of HDCP 2.3 encrypted sources to decoders connected to HDCP 2.3 compliant displays
- Maintain continuous HDCP encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160 with 4:4:4 chroma sampling
- Support a low latency encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMP v2 and v3 multicast per RFC 2236 and 3376
- Support RTP Real-time Transport Protocol per RFC 3550
- Support 802.1X port-based Network Access Control (PNAC)
- Support audio and USB breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support DiffServ QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values
- Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of video to 10 Gbps decoders in mixed 1/10 Gbps systems
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Shall be rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV E 511 (60-1958-06; no alternates or equals).
- Encode video, audio, Ethernet, and USB 2.0, and shall:
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari