MPS 602

MPS 602 MA

1. Provide a media presentation switcher that shall support up to six inputs and two outputs for switching of HDMI and RGB video sources, with additional support for long distance signal extension over shielded CATx cable.
   1. Rack-mountable switcher for HDMI and RGB video sources and associated digital and analog audio, plus signal extension over shielded CATx cable
      1. Video Input Requirements
         1. Provide video input connections
            1. Three HDMI
            2. Two 15-pin HD for RGB video
            3. One RJ-45 for HDMI or DVI from an Extron DTP® twisted pair transmitter
         2. Shall digitize analog video input signals prior to transmission to the digital video outputs
         3. Support HDMI specifications including 1080p/60 Deep, data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
         4. Support video transmission over shielded CATx up to 330 feet (100 meters)
      2. Video Output Requirements
         1. Provide video output connections
            1. One 15-pin HD for RGB
            2. Switch-selectable video output connections
               1. One HDMI
               2. One RJ-45 for HDMI or DVI to an Extron DTP twisted pair receiver
         2. Support video resolutions up to 1920x1200, including 1080p/60 and 2048x1080p/60
         3. Support video transmission over shielded CATx up to 330 feet (100 meters)
      3. Switching Requirements
         1. Provide automatic switching between input sources
            1. Automatically switch to the active input
            2. Provide a configurable switching priority when multiple inputs are active
               1. High to low: highest numbered input has priority
               2. Low to high: lowest numbered input has priority
         2. Provide independent switching between RGB input sources to the local RGB output
      4. EDID Requirements
         1. Provide automatic EDID management between connected devices
            1. Provide a set of pre-stored EDID files
            2. Support capture of EDID from any connected display
            3. Support user uploading of custom-generated EDID files
            4. Support assignment of pre-stored, captured, or custom uploaded EDID file for each input connection
      5. HDCP Requirements
         1. The unit shall be HDCP compliant
            1. Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
      6. Audio Requirements
         1. Provide audio input connections
            1. Three HDMI, embedded
            2. Five 5-pole captive screw, balanced/unbalanced line level analog stereo
            3. One 3-pole captive screw, mono mic/line level with switchable 48 V phantom power
            4. One RJ-45, DTP HDMI embedded and analog audio
         2. Provide audio output connections
            1. One HDMI, embedded
            2. One 5-pole captive screw, variable balanced/unbalanced, analog stereo audio with independent output level control
            3. One 5-pole captive screw, fixed balanced/unbalanced, analog stereo audio
            4. One RJ-45, DTP HDMI embedded
            5. One 2-pole captive screw, amplified 70 volt mono
         3. Provide mono 70 volt power amplification with 100 watts rms output
         4. Support embedding of program audio input signal onto the HDMI output
         5. Support extraction of two-channel PCM HDMI audio signals to the analog stereo outputs
         6. Support mixing of program audio and mic/line audio signals
         7. Support mic audio mixed with program audio on the HDMI/DTP output, fixed and variable audio outputs, and amplified audio output
         8. Provide the capability to break an analog audio signal away from its corresponding video signal and route to the audio outputs, allowing the analog audio channels to be operated as a separate switcher
         9. Provide adjustable, automatic ducking of program audio when a signal is detected on the microphone input
            1. Program audio shall automatically ramp up to reach the original volume level when audio is no longer detected on the microphone input
         10. Support audio transmission over shielded CATx up to 330 feet (100 meters)
      7. Control/Remote – RS-232 and IR Pass-Through Over Shielded CATx Requirements
         1. Provide connections for AV device control
            1. One 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair transmitter
            2. One 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair receiver
         2. Support RS-232 and IR transmission over shielded CATx up to 330 feet (100 meters)
      8. Control/Remote – Switcher Control Requirements
         1. Provide connections for remote switcher control
            1. 3-pole captive screw: RS-232
            2. Mini USB-B: USB 2.0
         2. Provide alternatives for configuration and operation
            1. Front panel controls
            2. Software control program connected via RS-232 or USB
            3. Serial commands sent over RS-232 or USB connection
         3. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      9. General Requirements
         1. Provide real-time verification of signal flow and operation from DTP transmitter or DTP receiver
            1. Directly readable on RJ-45 signal and link LEDs
         2. Shall be compatible with all Extron DTP 230 Series models, DTP 330 Series models, and DTP-enabled products
         3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
         4. Shall provide remote power to one remote DTP transmitter and one remote DTP receiver over the shielded CATx connections
         5. Enclosure shall be rack-mountable, full rack width, and 1RU in height
         6. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
   2. Approved device shall be the Extron MPS 602 MA (part number 60-1315-51); no alternates or equals