AVEdge 100

AVEdge 100

1. Provide a modular, configurable, edge furniture-mountable enclosure that shall support a combination of AV cables and cable retraction modules
   1. If cable retraction modules are not required, the device shall then support
      1. Up to eight AV cables, or
      2. Up to four AV connectivity modules, or
      3. Up to three cable retraction modules, plus up to four AV cables or two AV connectivity plates
   2. If cable retraction modules are required, the device shall then support
      1. Up to four AV cables, or
      2. Up to two AV connectivity modules, or
   3. The device shall include modules and mounting frames to support AV cables and/or AV connectivity modules.
      1. modules shall be positionable within the enclosure, with no fewer than two installer-determined height positions
      2. modules shall be positionable within the enclosure, mounting to the left of installed retractor modules
      3. cable pass-through module shall be a single unit
         1. plate shall be flexible to allow the installation, removal, or replacement of cables
         2. plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
         3. plate shall include plugs to cap cable pass-through openings that are not utilized
         4. assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
      4. AV connectivity frame shall be a single unit
         1. frame shall support two single-space AV connectivity modules, or one double-space AV connectivity module
         2. The assembled frame, with AV connectivity modules and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
   4. Device enclosure shall mount entirely on to the furniture edge sufficient to accommodate the enclosure
      1. enclosure shall feature an integrated clamp system
         1. clamps shall be semi-permanently affixed to the enclosure body
         2. clamps shall utilize a thumb screw on each clamp
         3. clamps shall secure the enclosure to the furniture without the need for tools or additional parts
         4. clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
   5. An Internet-accessible application for enclosure configuration and visualization shall be available
      1. Application shall provide for selection of the enclosure AV cables, AV connectivity plates, and cable retraction modules
      2. Application shall provide accurate depiction of connectivity selections
      3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
      4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
   6. Approved device shall be the AVEdge 100 (70-1128-02); no alternates or equals