最近閲覧した製品
XTP SFR HD 4K
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
XTP SFR HD 4K MM
- Shall provide a fiber optic scaling receiver that supports the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, and Ethernet
- Long distance signal extension of video, audio, and control signals plus Ethernet over one OM4 multimode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Automatically reformats HDMI source signals for output to a connected DVI display
- Shall provide selectable computer and video resolutions up to 3840x2160 @ 30 Hz with 4:4:4 chroma sampling, 2560x1600 @ 60 Hz, and 1080p/60 with Deep Color
- Shall provide a scaler bypass mode to support unprocessed transmission of 3D, 3840x2160/60 at 4:2:0, 4096x2160/24, and other formats
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall support a videowall mode when used with an XTP CrossPoint matrix switcher to enable a mix of full screen and image magnification across multiple displays for configurations up to 8x8
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze through RS-232 or Ethernet control
- Shall support HDMI specification features
- Data rates up to 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Embedded audio output requirements
- Shall provide one (1) female HDMI connector – shared with video input
- Shall support embedded digital audio formats
- Analog audio output requirements
- Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
- Shall provide one (1) 3.5 mm stereo jack for S/PDIF
- Shall provide one (1) 3.5 mm captive screw connector, five-pole for balanced or unbalanced analog stereo
- Shall provide the de-embedding of analog audio
- Shall provide the capability to adjust volume
- Shall provide capability to mute
- EDID communication requirements
- Shall support Extron EDID Minder® technology to automatically manage EDID communication between connected devices
- Control requirements
- Shall provide one (1) female mini USB port B on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
- Shall provide two (2) two-pole captive screw connectors on rear panel for relay control of room functions
- Ethernet extension
- Shall provide one (1) 10/100 Ethernet port
- Ethernet pass-through port to reduce the amount of independent network drops
- Shall provide one (1) 10/100 Ethernet port
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over one multimode fiber optic cable
- Shall provide one (1) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control signals plus Ethernet over one multimode fiber optic cable
- Shall provide signal transmission over OM4 laser optimized multimode fiber optic cable
- Shall provide signal extension up to 500 meters (1,640 feet)
- Shall support an optical loss budget of at least 8 dB between transmitter and receiver
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall include an external universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall provide internal color bars text pattern for calibration and setup
- Shall provide visual signal on LED indicators on the front panel for XTP signal presence, HDCP authentication, audio signal presence, audio format, and power
- Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
- Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall include Extron Lockit® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with all Extron XTP Systems products
- Approved device shall be the Extron XTP SFR HD 4K MM (60-1278-31); no alternates or equals
XTP SFR HD 4K MM
- Shall provide a fiber optic scaling receiver that supports the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, and Ethernet
- Long distance signal extension of video, audio, and control signals plus Ethernet over one OM4 multimode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Automatically reformats HDMI source signals for output to a connected DVI display
- Shall provide selectable computer and video resolutions up to 3840x2160 @ 30 Hz with 4:4:4 chroma sampling, 2560x1600 @ 60 Hz, and 1080p/60 with Deep Color
- Shall provide a scaler bypass mode to support unprocessed transmission of 3D, 3840x2160/60 at 4:2:0, 4096x2160/24, and other formats
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall support a videowall mode when used with an XTP CrossPoint matrix switcher to enable a mix of full screen and image magnification across multiple displays for configurations up to 8x8
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze through RS-232 or Ethernet control
- Shall support HDMI specification features
- Data rates up to 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Embedded audio output requirements
- Shall provide one (1) female HDMI connector – shared with video input
- Shall support embedded digital audio formats
- Analog audio output requirements
- Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
- Shall provide one (1) 3.5 mm stereo jack for S/PDIF
- Shall provide one (1) 3.5 mm captive screw connector, five-pole for balanced or unbalanced analog stereo
- Shall provide the de-embedding of analog audio
- Shall provide the capability to adjust volume
- Shall provide capability to mute
- EDID communication requirements
- Shall support Extron EDID Minder® technology to automatically manage EDID communication between connected devices
- Control requirements
- Shall provide one (1) female mini USB port B on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
- Shall provide two (2) two-pole captive screw connectors on rear panel for relay control of room functions
- Ethernet extension
- Shall provide one (1) 10/100 Ethernet port
- Ethernet pass-through port to reduce the amount of independent network drops
- Shall provide one (1) 10/100 Ethernet port
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over one multimode fiber optic cable
- Shall provide one (1) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control signals plus Ethernet over one multimode fiber optic cable
- Shall provide signal transmission over OM4 laser optimized multimode fiber optic cable
- Shall provide signal extension up to 500 meters (1,640 feet)
- Shall support an optical loss budget of at least 8 dB between transmitter and receiver
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall include an external universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall provide internal color bars text pattern for calibration and setup
- Shall provide visual signal on LED indicators on the front panel for XTP signal presence, HDCP authentication, audio signal presence, audio format, and power
- Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
- Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall include Extron Lockit® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with all Extron XTP Systems products
- Approved device shall be the Extron XTP SFR HD 4K MM (60-1278-31); no alternates or equals
XTP SFR HD 4K SM
- Shall provide a fiber optic scaling receiver that supports the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, and Ethernet
- Long distance signal extension of video, audio, and control signals plus Ethernet over one singlemode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Automatically reformats HDMI source signals for output to a connected DVI display
- Shall provide selectable computer and video resolutions up to 3840x2160 @ 30 Hz with 4:4:4 chroma sampling, 2560x1600 @ 60 Hz, and 1080p/60 with Deep Color
- Shall provide a scaler bypass mode to support unprocessed transmission of 3D, 3840x2160/60 at 4:2:0, 4096x2160/24, and other formats
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall support a videowall mode when used with an XTP CrossPoint matrix switcher to enable a mix of full screen and image magnification across multiple displays for configurations up to 8x8
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze through RS-232 or Ethernet control
- Shall support HDMI specification features
- Data rates up to 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Embedded audio output requirements
- Shall provide one (1) female HDMI connector – shared with video input
- Shall support embedded digital audio formats
- Analog audio output requirements
- Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
- Shall provide one (1) 3.5 mm stereo jack for S/PDIF
- Shall provide one (1) 3.5 mm captive screw connector, five-pole for balanced or unbalanced analog stereo
- Shall provide the de-embedding of analog audio
- Shall provide the capability to adjust volume
- Shall provide capability to mute
- EDID communication requirements
- Shall support Extron EDID Minder® technology to automatically manage EDID communication between connected devices
- Control requirements
- Shall provide one (1) female mini USB port B on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
- Shall provide two (2) two-pole captive screw connectors on rear panel for relay control of room functions
- Ethernet extension
- Shall provide one (1) 10/100 Ethernet port
- Ethernet pass-through port to reduce the amount of independent network drops
- Shall provide one (1) 10/100 Ethernet port
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over one singlemode fiber optic cable
- Shall provide one (1) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control signals plus Ethernet over one singlemode fiber optic cable
- Shall provide signal transmission over singlemode fiber optic cable
- Shall provide signal extension up to 10 km (6.21 miles)
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall include an external universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall provide internal color bars text pattern for calibration and setup
- Shall provide visual signal on LED indicators on the front panel for XTP signal presence, HDCP authentication, audio signal presence, audio format, and power
- Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
- Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall include Extron Lockit® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with all Extron XTP Systems products
- Approved device shall be the Extron XTP SFR HD 4K SM (60-1278-32); no alternates or equals
XTP SFR HD 4K SM
- Shall provide a fiber optic scaling receiver that supports the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, and Ethernet
- Long distance signal extension of video, audio, and control signals plus Ethernet over one singlemode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Automatically reformats HDMI source signals for output to a connected DVI display
- Shall provide selectable computer and video resolutions up to 3840x2160 @ 30 Hz with 4:4:4 chroma sampling, 2560x1600 @ 60 Hz, and 1080p/60 with Deep Color
- Shall provide a scaler bypass mode to support unprocessed transmission of 3D, 3840x2160/60 at 4:2:0, 4096x2160/24, and other formats
- Shall provide selectable aspect ratio control
- FILL mode - the video image shall always fill the output screen without letterbox or pillarbox
- FOLLOW mode - the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Shall support a videowall mode when used with an XTP CrossPoint matrix switcher to enable a mix of full screen and image magnification across multiple displays for configurations up to 8x8
- Shall provide internal test patterns for calibration and setup
- Shall support image freeze through RS-232 or Ethernet control
- Shall support HDMI specification features
- Data rates up to 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- Shall provide one (1) female HDMI connector for digital video signals with embedded audio
- Embedded audio output requirements
- Shall provide one (1) female HDMI connector – shared with video input
- Shall support embedded digital audio formats
- Analog audio output requirements
- Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
- Shall provide one (1) 3.5 mm stereo jack for S/PDIF
- Shall provide one (1) 3.5 mm captive screw connector, five-pole for balanced or unbalanced analog stereo
- Shall provide the de-embedding of analog audio
- Shall provide the capability to adjust volume
- Shall provide capability to mute
- EDID communication requirements
- Shall support Extron EDID Minder® technology to automatically manage EDID communication between connected devices
- Control requirements
- Shall provide one (1) female mini USB port B on front panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
- Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
- Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
- Shall provide two (2) two-pole captive screw connectors on rear panel for relay control of room functions
- Ethernet extension
- Shall provide one (1) 10/100 Ethernet port
- Ethernet pass-through port to reduce the amount of independent network drops
- Shall provide one (1) 10/100 Ethernet port
- Interconnection requirements
- Shall provide interconnection between transmitter and receiver over one singlemode fiber optic cable
- Shall provide one (1) LC-type fiber optic connectors for interconnection between transmitter and receiver
- Transmission requirements
- Shall support extension of video, audio, and control signals plus Ethernet over one singlemode fiber optic cable
- Shall provide signal transmission over singlemode fiber optic cable
- Shall provide signal extension up to 10 km (6.21 miles)
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a visual confirmation when encrypted content is sent to a non-compliant display device
- Power requirements
- Shall include an external universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- General requirements
- Shall provide internal color bars text pattern for calibration and setup
- Shall provide visual signal on LED indicators on the front panel for XTP signal presence, HDCP authentication, audio signal presence, audio format, and power
- Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
- Shall have a 1-inch (2.5 cm) high, half rack width metal enclosure
- Shall be rack mountable with optional rack shelf
- Shall be wall or furniture mountable with optional mounting kits
- Shall include Extron Lockit® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall provide at least three years parts and labor warranty
- Shall be compatible with all Extron XTP Systems products
- Approved device shall be the Extron XTP SFR HD 4K SM (60-1278-32); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari