XTP CP 4K I/Oボード
RS-232/IRインサーション対応XTP 4Kトランスミッターおよびレシーバーボード
XTP CP 4K I/Oボード
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
XTP CP 4i 4K
- Provide a four (4) input twisted pair receiver board that is compatible with the video matrix switcher and occupies one (1) input slot
- Single slot input board that accepts twisted pair signals from XTP system transmitters
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shal support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Shall support the ability to break away an audio signal from its corresponding video signal
- Remote power requirements
- Shall support remote power to twisted pair transmitters when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- Shall support remote power to transmitters when used in conjunction with configurable video matrix switcher
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4i 4K (70-940-31); no alternates or equals
- Single slot input board that accepts twisted pair signals from XTP system transmitters
XTP CP 4i 4K
- Provide a four (4) input twisted pair receiver board that is compatible with the video matrix switcher and occupies one (1) input slot
- Single slot input board that accepts twisted pair signals from XTP system transmitters
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shal support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Shall support the ability to break away an audio signal from its corresponding video signal
- Remote power requirements
- Shall support remote power to twisted pair transmitters when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- Shall support remote power to transmitters when used in conjunction with configurable video matrix switcher
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4i 4K (70-940-31); no alternates or equals
- Single slot input board that accepts twisted pair signals from XTP system transmitters
XTP CP 4o 4K
- Provide a four (4) output twisted pair transmitter board that is compatible with the video matrix switcher and occupies one (1) output slot
- Single slot output board that transmits twisted pair signals to XTP system receivers
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shall support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Remote power requirements
- Shall support remote power to receivers when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4o 4K (70-943-31); no alternates or equals
- Single slot output board that transmits twisted pair signals to XTP system receivers
XTP CP 4o 4K
- Provide a four (4) output twisted pair transmitter board that is compatible with the video matrix switcher and occupies one (1) output slot
- Single slot output board that transmits twisted pair signals to XTP system receivers
- Shall provide four (4) RJ-45 style jacks for digital video
- Shall provide four (4) RJ-45 style jacks for Ethernet extension via independent RJ-45 jacks to extend network information over a shielded CATx cable with video, audio, and control signals
- Shall provide four (4) 5-pole captive screw connectors for bidirectional RS-232 and infrared (IR) signal pass-through
- Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
- Shall support video resolutions up to 4096x2160 at 30 Hz with 4:4:4 color sampling
- Shall support RGB and YCbCr color space formats
- Shall support HDMI specifications of
- Data rates up 10.2 Gbps
- Deep Color up to 12-bit
- 3D content
- HD lossless audio formats
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
- EDID requirements
- Shall provide automatic EDID management between connected devices
- Maintain continuous EDID communication with the connected source
- Shall provide automatic EDID management between connected devices
- Audio requirements
- Shall support multiple embedded audio formats
- Remote power requirements
- Shall support remote power to receivers when used in conjunction with configurable video matrix switcher
- Shall not require an external power supply to provide remote power to twisted pair receivers
- General requirements
- Shall be hot-swappable
- Shall allow setup and configuration through a system-wide management software from an XTP matrix switcher communication channel
- Shall provide at least three (3) years parts and labor warranty
- Shall be compatible with XTP II CrossPoint and XTP CrossPoint matrix switchers
- Approved device shall be the Extron XTP CP 4o 4K (70-943-31); no alternates or equals
- Single slot output board that transmits twisted pair signals to XTP system receivers
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari