最近閲覧した製品
DisplayPort Ultraシリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
DisplayPort Ultra/3
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 3 ft (90 cm) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/3, part number 26-691-03; no alternates or equals.
DisplayPort Ultra/3
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 3 ft (90 cm) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/3, part number 26-691-03; no alternates or equals.
DisplayPort Ultra/6
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 6 ft (1.8 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/6, part number 26-691-06; no alternates or equals.
DisplayPort Ultra/6
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 6 ft (1.8 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/6, part number 26-691-06; no alternates or equals.
DisplayPort Ultra/9
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 9 ft (2.7 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/9, part number 26-691-09; no alternates or equals.
DisplayPort Ultra/9
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 9 ft (2.7 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/9, part number 26-691-09; no alternates or equals.
DisplayPort Ultra/12
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 12 ft (3.6 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/12, part number 26-691-12; no alternates or equals.
DisplayPort Ultra/12
- Provide interconnection for the transmission of DisplayPort video and audio signals over a copper cable assembly.
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Shall support resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling and 8-bit color depth
- Shall support data rates up to 21.6 Gbps
- Shall meet the following cable construction requirements:
- 30 AWG copper wire
- DisplayPort male connectors with gold-plated contacts
- Low bend radius of 0.80” (20.3 mm)
- Cable outer diameter of 0.22” (5.7 mm)
- Cable shall be 12 ft (3.6 m) in length
- Cable shall provide protection from outside electrical interference
- Cable shall comply with UL VW-1 and CSA FT-1 standards
- Cable shall have a temperature rating of 80 °C
- Cable shall be certified for use with AVEdge, Cable Cubby®, and HSA surface access enclosures
- Cable shall conform to the DisplayPort 1.2 standard established by the Video Electronics Standards Association, VESA
- Approved cable shall be Extron DisplayPort Ultra/12, part number 26-691-12; no alternates or equals.
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
DisplayPort Ultraシリーズ
ウルトラフレックスDisplayPortケーブル
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari