製品ページホーム
DisplayPort製品
DisplayPortケーブル
DisplayPortエクステンダー DisplayPort分配器 DisplayPortスケーラー
&シグナルプロセッサー DisplayPort変換アダプター DisplayPort AVコネクティビティーモジュール Mini DisplayPortケーブル&アダプター EDID管理
DP Pro Plenumシリーズ
DisplayPort Ultraシリーズ DisplayPortシリーズ DP Pro Plenumシリーズ

印刷

Pro

DP Pro Plenumシリーズ

DisplayPort 8K光ファイバーケーブル - プレナム

主な特長

DisplayPort 1.4の規格に準拠
最大ビデオデータレート34 Gbpsおよび最大8K/30解像度、4:4:4カラーサンプリングに対応
EDID、HDCP、CECに対応
柔軟性が高い直径わずか4.7 mmのケーブル
NEC CMPプレナム準拠の防煙ケーブル
別途電源供給が不要
詳しくはこちらから

Previous Next

製品イメージ

コンサルタント向け製品資料

8Kデータレートカリキュレーター

概要
ビデオ
詳細
仕様
システム図
ケーブル図
ダウンロード

概要

DP Pro Plenumシリーズ光ファイバー銅線ハイブリッドアクティブケーブルは、DisplayPort 1.4信号の高速伝送に対応します。最大8K/30解像度、4:4:4カラーサンプリング、HDR、EDID、HDCP、CEC、32チャンネルのオーディオに対応しています。直径わずか4.7 mmの極細ケーブルは最小曲げ半径が小さく、わずかなスペースでも通線が可能、設置性と妥協のない高性能を両立しました。これらの単方向アクティブケーブルはDisplayPortソースからのわずかな電力で作動します。7.6 mから45.7 mまでの7種類の長さをラインアップしています。

ビデオ

詳細

仕様

システム図

ケーブル図

ダウンロード

DP Pro P/25 - DisplayPort 8K Optical Cables- 25' (7.6 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 25 foot (7.6 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/25, part number 26-727-25; no alternates or equals

DP Pro P/25 - DisplayPort 8K Optical Cables- 25' (7.6 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 25 foot (7.6 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/25, part number 26-727-25; no alternates or equals

DP Pro P/35 - DisplayPort 8K Optical Cables- 35' (10.6 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 35 foot (10.6 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/35, part number 26-727-35; no alternates or equals

DP Pro P/35 - DisplayPort 8K Optical Cables- 35' (10.6 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 35 foot (10.6 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/35, part number 26-727-35; no alternates or equals

DP Pro P/50 - DisplayPort 8K Optical Cables- 50' (15.2 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 50 foot (15.2m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/50, part number 26-727-50; no alternates or equals

DP Pro P/50 - DisplayPort 8K Optical Cables- 50' (15.2 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 50 foot (15.2m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
9. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
10. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/50, part number 26-727-50; no alternates or equals

DP Pro P/75 - DisplayPort 8K Optical Cables- 75' (22.8 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 75 foot (22.8 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/75, part number 26-727-75; no alternates or equals

DP Pro P/75 - DisplayPort 8K Optical Cables- 75' (22.8 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 75 foot (22.8 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/75, part number 26-727-75; no alternates or equals

DP Pro P/125 - DisplayPort 8K Optical Cables- 125' (38 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 125 foot (38 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/125, part number 26-727-125; no alternates or equals

DP Pro P/125 - DisplayPort 8K Optical Cables- 125' (38 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 125 foot (38 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/125, part number 26-727-125; no alternates or equals

DP Pro P/150 - DisplayPort 8K Optical Cables- 150' (45.7 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 150 foot (45.7 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/150, part number 26-727-150; no alternates or equals

DP Pro P/150 - DisplayPort 8K Optical Cables- 150' (45.7 m) Plenum

Provide interconnection for the ultra high-speed transmission of DisplayPort 1.4 digital video and audio signals over a hybrid copper-optical cable assembly.
1. Cable shall conform to the DisplayPort™ standard version 1.4 established by the Video Electronics Standards Association, VESA
  1. Shall support resolutions up to 7680 x4320 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
  2. Shall support data rates up to 32.4 Gbps
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper conductors
  2. DisplayPort male connectors with gold-plated contacts
  3. Bend radius of 0.79" (20 mm)
  4. Cable outer diameter of 0.18” (4.6 mm)
  5. Max tensile strength of 500 N (50 kg, 110 lbs)
  6. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
3. Cable shall be 150 foot (45.7 m) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the source or sink DisplayPort connection
7. Cable shall consume no more than 375 mW at 3.3 V of power
8. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  1. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  2. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron DP Pro P/150, part number 26-727-150; no alternates or equals

アイテムをカートに追加する

Order Message Number

製品番号

注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

数量

現在の合計金額:

カートを見る

DP Pro Plenumシリーズ -

製品ページを表示

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.