Provide a modular, configurable, and round furniture-mountable enclosure that shall support a combination of USB power mini connectivity plates and AV cables
Device shall support one USB power mini connectivity plate plus
Up to three AV cables, or
Up to two mini AV connectivity plates, or
If USB power is not required, the device shall then support
Up to six AV cables, or
Up to four mini AV connectivity plates
The device shall include modules and mounting frames to support USB power, AV cables and/or mini AV connectivity plates.
The modules shall be positionable within the enclosure, with no fewer than eight installer-determined height positions
The modules shall be positionable within the enclosure, mounting to below of an installed USB power module or supplemental connectivity module
USB power modules shall be available
USB power modules shall be UL listed and CE compliant when installed within the enclosure
USB power modules shall include two USB power outlets
USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
The cable pass-through plate shall be a single unit
The plate shall be flexible to allow the installation, removal, or replacement of cables
The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
The plate shall include plugs to cap cable pass-through openings that are not utilized
The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
The AV connectivity frame shall be a single unit
The frame shall support two single-space mini AV connectivity plates, or one double-space mini AV connectivity plate
The assembled frame, with mini AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
Device shall include an attached and fully integrated, all plastic cover plate and metal housing assembly to conceal mounting hardware
The lid and housing assembly shall be available in a black finish
Cover plate shall fit entirely over the housing and attach with integrated magnets
Device shall include a tool that removes the cover plate safely from the enclosure
Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure body
An opening of an appropriate size shall be made with 4” round saw to accommodate the enclosure; round saw not included
The enclosure shall feature screw holes on the bezel
The screws shall be inserted through the bezel to permanently affix the enclosure body to the tabletop surface
The enclosure body and mounting screws shall be covered with included cover plate
The cover plate shall be removable from the enclosure body with the included tool to release it from the mounting magnets
An Internet-accessible application for enclosure configuration and visualization shall be available
Application shall provide for selection of the enclosure, USB power modules, AV cables, and mini AV connectivity plates
Application shall provide accurate depiction of power and connectivity selections
Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
Approved device shall be the Extron Cable Cubby 100 with USB Power outlet (60-1592-12); no alternates or equals
Cable Cubby 100 with USB Power
Provide a modular, configurable, and round furniture-mountable enclosure that shall support a combination of USB power mini connectivity plates and AV cables
Device shall support one USB power mini connectivity plate plus
Up to three AV cables, or
Up to two mini AV connectivity plates, or
If USB power is not required, the device shall then support
Up to six AV cables, or
Up to four mini AV connectivity plates
The device shall include modules and mounting frames to support USB power, AV cables and/or mini AV connectivity plates.
The modules shall be positionable within the enclosure, with no fewer than eight installer-determined height positions
The modules shall be positionable within the enclosure, mounting to below of an installed USB power module or supplemental connectivity module
USB power modules shall be available
USB power modules shall be UL listed and CE compliant when installed within the enclosure
USB power modules shall include two USB power outlets
USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
The cable pass-through plate shall be a single unit
The plate shall be flexible to allow the installation, removal, or replacement of cables
The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
The plate shall include plugs to cap cable pass-through openings that are not utilized
The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
The AV connectivity frame shall be a single unit
The frame shall support two single-space mini AV connectivity plates, or one double-space mini AV connectivity plate
The assembled frame, with mini AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
Device shall include an attached and fully integrated, all plastic cover plate and metal housing assembly to conceal mounting hardware
The lid and housing assembly shall be available in a black finish
Cover plate shall fit entirely over the housing and attach with integrated magnets
Device shall include a tool that removes the cover plate safely from the enclosure
Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure body
An opening of an appropriate size shall be made with 4” round saw to accommodate the enclosure; round saw not included
The enclosure shall feature screw holes on the bezel
The screws shall be inserted through the bezel to permanently affix the enclosure body to the tabletop surface
The enclosure body and mounting screws shall be covered with included cover plate
The cover plate shall be removable from the enclosure body with the included tool to release it from the mounting magnets
An Internet-accessible application for enclosure configuration and visualization shall be available
Application shall provide for selection of the enclosure, USB power modules, AV cables, and mini AV connectivity plates
Application shall provide accurate depiction of power and connectivity selections
Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
Approved device shall be the Extron Cable Cubby 100 with USB Power outlet (60-1592-12); no alternates or equals
Cable Cubby 100 Power Module Not Included
Provide a modular, configurable, and round furniture-mountable enclosure that shall support a combination of mini connectivity plates and AV cables
Device shall support two single-space or one double-space mini connectivity plate plus
Up to three AV cables, or
If mini connectivity plates are not required, the device shall then support
Up to six AV cables
The device shall include modules and mounting frames to support AV cables and/or mini AV connectivity plates.
The modules shall be positionable within the enclosure, with no fewer than two installer-determined height positions in the lower connectivity opening
The cable pass-through plate shall be a single unit
The plate shall be flexible to allow the installation, removal, or replacement of cables
The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
The plate shall include plugs to cap cable pass-through openings that are not utilized
The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
The AV connectivity frame shall be a single unit
The frame shall support two single-space mini AV connectivity plates, or one double-space mini AV connectivity plate
The assembled frame, with mini AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
Device shall include an attached and fully integrated, all plastic cover plate and metal housing assembly
The lid and housing assembly shall be available in a black finish
Cover plate shall fit entirely over the housing and attach with integrated magnets
Device shall include a tool that removes the cover plate safely from the enclosure
Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure body
An opening of an appropriate size shall be made with 4” round saw to accommodate the enclosure; round saw not included
The enclosure shall feature screw holes on the bezel
The screws shall be inserted through the bezel to permanently affix the enclosure body to the tabletop surface
The enclosure body and mounting screws shall be covered with included cover plate
The cover plate shall be removable from the enclosure body with the included tool to release it from the mounting magnets
An Internet-accessible application for enclosure configuration and visualization shall be available
Application shall provide for selection of the enclosure, AV cables, and mini AV connectivity plates
Application shall provide accurate depiction of power and connectivity selections
Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
Approved device shall be the Extron Cable Cubby 100 without USB Power outlet (70-1109-02); no alternates or equals
Cable Cubby 100 Power Module Not Included
Provide a modular, configurable, and round furniture-mountable enclosure that shall support a combination of mini connectivity plates and AV cables
Device shall support two single-space or one double-space mini connectivity plate plus
Up to three AV cables, or
If mini connectivity plates are not required, the device shall then support
Up to six AV cables
The device shall include modules and mounting frames to support AV cables and/or mini AV connectivity plates.
The modules shall be positionable within the enclosure, with no fewer than two installer-determined height positions in the lower connectivity opening
The cable pass-through plate shall be a single unit
The plate shall be flexible to allow the installation, removal, or replacement of cables
The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
The plate shall include plugs to cap cable pass-through openings that are not utilized
The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
The AV connectivity frame shall be a single unit
The frame shall support two single-space mini AV connectivity plates, or one double-space mini AV connectivity plate
The assembled frame, with mini AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
Device shall include an attached and fully integrated, all plastic cover plate and metal housing assembly
The lid and housing assembly shall be available in a black finish
Cover plate shall fit entirely over the housing and attach with integrated magnets
Device shall include a tool that removes the cover plate safely from the enclosure
Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure body
An opening of an appropriate size shall be made with 4” round saw to accommodate the enclosure; round saw not included
The enclosure shall feature screw holes on the bezel
The screws shall be inserted through the bezel to permanently affix the enclosure body to the tabletop surface
The enclosure body and mounting screws shall be covered with included cover plate
The cover plate shall be removable from the enclosure body with the included tool to release it from the mounting magnets
An Internet-accessible application for enclosure configuration and visualization shall be available
Application shall provide for selection of the enclosure, AV cables, and mini AV connectivity plates
Application shall provide accurate depiction of power and connectivity selections
Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
Approved device shall be the Extron Cable Cubby 100 without USB Power outlet (70-1109-02); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Cable Cubby 100 -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.