最近閲覧した製品
XTP DTP 24
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
XTP DTP 24 (non-plenum)
- Provide interconnection of digital video over twisted pair switching, distribution, and extension devices when terminated with an applicable RJ-45 plug or jack
- Shielded twisted pair cable for digital video over twisted pair devices
- Cable shall be optimized for use in digital video over twisted pair applications
- Cable shall be certified to 475 MHz bandwidth at distances up to 100 meters (330 feet)
- Cable shall provide protection from outside electrical interference
- Cable shall utilize SF/UTP construction
- An overall tinned copper braid with 55% coverage
- An overall aluminized Mylar shield
- Four unshielded twisted pair conductors (eight individual conductors) of 24 AWG solid copper
- Nominal pair-to-pair skew shall be no less than 8 nano-seconds per 100 meters, and no more than 25 nano-seconds per 100 meters
- Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
- Cable shall be rated and in compliance with European Commission CPR, Construction Products Regulation (EU 305/2011)
- Euroclass Dca-s2,d0 classification
- Cable shall be packaged in spools of 1000 feet (305 meters)
- Complementary cable termination products, including shielded RJ-45 Plugs, Punch Down Jacks, and Couplers, shall be available from the same source as the cable
- Approved cable shall be Extron XTP DTP 24, part number 22-236-03; no alternates or equals
- Available complementary cable termination products shall be the Extron XTP DTP 24 Plug, part number 101-005-02; Extron XTP DTP 24 Jack, part number 101-023-01; and Extron XTP DTP 24 Coupler, part number 101-022-02; no alternates or equals
- Shielded twisted pair cable for digital video over twisted pair devices
XTP DTP 24 (non-plenum)
- Provide interconnection of digital video over twisted pair switching, distribution, and extension devices when terminated with an applicable RJ-45 plug or jack
- Shielded twisted pair cable for digital video over twisted pair devices
- Cable shall be optimized for use in digital video over twisted pair applications
- Cable shall be certified to 475 MHz bandwidth at distances up to 100 meters (330 feet)
- Cable shall provide protection from outside electrical interference
- Cable shall utilize SF/UTP construction
- An overall tinned copper braid with 55% coverage
- An overall aluminized Mylar shield
- Four unshielded twisted pair conductors (eight individual conductors) of 24 AWG solid copper
- Nominal pair-to-pair skew shall be no less than 8 nano-seconds per 100 meters, and no more than 25 nano-seconds per 100 meters
- Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
- Cable shall be rated and in compliance with European Commission CPR, Construction Products Regulation (EU 305/2011)
- Euroclass Dca-s2,d0 classification
- Cable shall be packaged in spools of 1000 feet (305 meters)
- Complementary cable termination products, including shielded RJ-45 Plugs, Punch Down Jacks, and Couplers, shall be available from the same source as the cable
- Approved cable shall be Extron XTP DTP 24, part number 22-236-03; no alternates or equals
- Available complementary cable termination products shall be the Extron XTP DTP 24 Plug, part number 101-005-02; Extron XTP DTP 24 Jack, part number 101-023-01; and Extron XTP DTP 24 Coupler, part number 101-022-02; no alternates or equals
- Shielded twisted pair cable for digital video over twisted pair devices
XTP DTP 24P (plenum)
- Provide interconnection of digital video over twisted pair switching, distribution, and extension devices when terminated with an applicable RJ-45 plug or jack
- Shielded twisted pair cable for digital video over twisted pair devices
- Cable shall be optimized for use in digital video over twisted pair applications
- Cable shall be certified to 475 MHz bandwidth at distances up to 100 meters (330 feet)
- Cable shall provide protection from outside electrical interference
- Cable shall utilize fire-resistant SF/UTP construction
- An overall tinned copper braid with 55% coverage
- An overall aluminized Mylar shield
- Four unshielded twisted pair conductors (eight individual conductors) of 24 AWG solid copper
- Solid FEP - Fluorinated ethylene propylene insulation
- Fire-resistant PVC outer jacket
- Nominal pair-to-pair skew shall be no less than 8 nano-seconds per 100 meters, and no more than 25 nano-seconds per 100 meters
- Cable shall comply with NEC – National Electrical Code Article 800 CMP and UL 910 standards at 75 degrees Celsius
- Cable shall be rated and in compliance with European Commission CPR, Construction Products Regulation (EU 305/2011)
- Euroclass Dca-s1,d0 classification
- Cable shall be packaged in spools of 1000 feet (305 meters)
- Complementary cable termination products, including shielded RJ-45 Plugs, Punch Down Jacks, and Couplers, shall be available from the same source as the cable
- Approved cable shall be Extron XTP DTP 24P, part number 22-235-03; no alternates or equals
- Available complementary cable termination products shall be the Extron XTP DTP 24 Plug, part number 101-005-02; Extron XTP DTP 24 Jack, part number 101-023-01; and Extron XTP DTP 24 Coupler, part number 101-022-02; no alternates or equals
- Shielded twisted pair cable for digital video over twisted pair devices
XTP DTP 24P (plenum)
- Provide interconnection of digital video over twisted pair switching, distribution, and extension devices when terminated with an applicable RJ-45 plug or jack
- Shielded twisted pair cable for digital video over twisted pair devices
- Cable shall be optimized for use in digital video over twisted pair applications
- Cable shall be certified to 475 MHz bandwidth at distances up to 100 meters (330 feet)
- Cable shall provide protection from outside electrical interference
- Cable shall utilize fire-resistant SF/UTP construction
- An overall tinned copper braid with 55% coverage
- An overall aluminized Mylar shield
- Four unshielded twisted pair conductors (eight individual conductors) of 24 AWG solid copper
- Solid FEP - Fluorinated ethylene propylene insulation
- Fire-resistant PVC outer jacket
- Nominal pair-to-pair skew shall be no less than 8 nano-seconds per 100 meters, and no more than 25 nano-seconds per 100 meters
- Cable shall comply with NEC – National Electrical Code Article 800 CMP and UL 910 standards at 75 degrees Celsius
- Cable shall be rated and in compliance with European Commission CPR, Construction Products Regulation (EU 305/2011)
- Euroclass Dca-s1,d0 classification
- Cable shall be packaged in spools of 1000 feet (305 meters)
- Complementary cable termination products, including shielded RJ-45 Plugs, Punch Down Jacks, and Couplers, shall be available from the same source as the cable
- Approved cable shall be Extron XTP DTP 24P, part number 22-235-03; no alternates or equals
- Available complementary cable termination products shall be the Extron XTP DTP 24 Plug, part number 101-005-02; Extron XTP DTP 24 Jack, part number 101-023-01; and Extron XTP DTP 24 Coupler, part number 101-022-02; no alternates or equals
- Shielded twisted pair cable for digital video over twisted pair devices
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:

Chrome
Firefox
Edge
Safari