最近閲覧した製品
VN-Matrix 250シリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
VNE 250 Encoder
- Provide an HDCP-compliant encoder that supports low-delay, high quality streaming applications for computer-video or standard video resolutions, analog and digital audio, RS232, USB keyboard and mouse data and with return audio decoding
- Rack mountable, one-half rack width, 1U high metal enclosure that encodes audio, video, USB keyboard and mouse, RS232 data and decodes return audio shall:
- Provide an HDMI connector for interfacing digital video signal inputs with embedded audio and a loop through HDMI connection
- Provide a 15 pin HD female connector for interfacing analog RGB video signals and a loop through 15 pin HD female connector
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on rear panel for line-level balanced/unbalanced stereo audio input
- One 3.5mm female jack for local monitoring of stereo analog audio input
- One set of captive screw connections on rear panel for line-level balanced/unbalanced stereo audio return audio connection output
- Provide front panel LCD display and controls for device configuration
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- One RS-232 captive screw connection on rear panel
- Provide one 10/100BASE-T RJ-45 network connection to provide access to the system from an external AV control interface
- Provide one 100/1000BASE-T RJ45 connector for transport of streaming data
- Provide one SFP socket for optional use of fiber-optic transceivers to provide optical Ethernet transport in place of the 100/1000BASE-T RJ45 streaming connection
- Provide four LED indicators for status monitoring
- Control LED to indicate status of control data
- Stream LED to indicate status of streaming
- Status LED to indicate status of input source
- Alarm LED to indicate presence of a system fault
- Provide a USB host interface to connect a source PC’s keyboard and mouse to the encoder, enabling remote keyboard/mouse control from a decoder
- Support bidirectional serial RS-232 control between external AV devices across an encoder and decoder connection
- Support two-way audio streaming to enable bi-directional audio communication between encoder and decoder
- Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
- Maintain continuous HDCP-encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 480p, 720p, 1080i and 1080p
- Support computer-video resolutions from 640x480 up to 1920x1200 and 2048x1080
- Support HDMI signals with RGB or YCrCb color space
- Accept RGBHV and RGsB analog signals
- Support vertical scan rates for RGB signals between 23.98 Hz and 85 Hz
- Support horizontal scan rates for RGB signals between 15 kHz and 100 kHz
- Support automatic sensing of the resolution and signal format of video inputs
- Support manual selection of signal format for video signal input
- Support HDMI embedded and analog stereo audio
- Support automatic detection of video source input resolutions
- Support 24 bit, 8 bit per color encoding and processing that is capable of maintaining the 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 2048x1080p and 1920x1200
- Support a low delay, encode and decode process of 70 ms
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support unicast streaming to up to four destination addresses
- Support unicast RTP, unicast TCP and IGMP multicast streaming applications
- Support audio breakaway streaming
- Offer adjustment over the Ethernet frame Maximum Transmission Unit – MTU
- Provide contact closure notice of definable warnings or alarms to support system monitoring
- Support automatic or manual negotiation of network link speed and duplex mode
- Support VLAN tagging
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support compatibility with a network appliance for recording and playing back audio, video, RS-232 or UDP data
- Support configuration and control in systems consisting of multiple codecs, encoders, decoders and recorder appliances from a central networked control unit
- Support encoding and decoding audio and video at bit rates from 500 kbps to 270 Mbps
- Maintain audio-video synchronization and synchronization of multiple channels of audio and video
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second.
- Offer independent control over spatial compression of luminance and chrominance information
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Support compression and encoding based on constant quality, variable spatial quality or frame rate based on bit rate targets
- Offer bit rate management based on: definable frame rates from 1 to 60 frames per second, adaptive frame dropping based on bit rate targets, adaptive spatial compression based on bit rate targets or combined adaptive spatial compression and adaptive frame dropping
- Supports compression of audio at various bit rates from 3 Mbps for program quality down to 400 kbps for voice grade applications
- Support intelligent power management including control over continuous operation and sleep mode as well as the video output detected by displays that apply intelligent power management
- Approved device shall be the Extron VNE 250 Encoder (60-1274-01; no alternates or equals)
- Rack mountable, one-half rack width, 1U high metal enclosure that encodes audio, video, USB keyboard and mouse, RS232 data and decodes return audio shall:
VNE 250 Encoder
- Provide an HDCP-compliant encoder that supports low-delay, high quality streaming applications for computer-video or standard video resolutions, analog and digital audio, RS232, USB keyboard and mouse data and with return audio decoding
- Rack mountable, one-half rack width, 1U high metal enclosure that encodes audio, video, USB keyboard and mouse, RS232 data and decodes return audio shall:
- Provide an HDMI connector for interfacing digital video signal inputs with embedded audio and a loop through HDMI connection
- Provide a 15 pin HD female connector for interfacing analog RGB video signals and a loop through 15 pin HD female connector
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on rear panel for line-level balanced/unbalanced stereo audio input
- One 3.5mm female jack for local monitoring of stereo analog audio input
- One set of captive screw connections on rear panel for line-level balanced/unbalanced stereo audio return audio connection output
- Provide front panel LCD display and controls for device configuration
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- One RS-232 captive screw connection on rear panel
- Provide one 10/100BASE-T RJ-45 network connection to provide access to the system from an external AV control interface
- Provide one 100/1000BASE-T RJ45 connector for transport of streaming data
- Provide one SFP socket for optional use of fiber-optic transceivers to provide optical Ethernet transport in place of the 100/1000BASE-T RJ45 streaming connection
- Provide four LED indicators for status monitoring
- Control LED to indicate status of control data
- Stream LED to indicate status of streaming
- Status LED to indicate status of input source
- Alarm LED to indicate presence of a system fault
- Provide a USB host interface to connect a source PC’s keyboard and mouse to the encoder, enabling remote keyboard/mouse control from a decoder
- Support bidirectional serial RS-232 control between external AV devices across an encoder and decoder connection
- Support two-way audio streaming to enable bi-directional audio communication between encoder and decoder
- Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
- Maintain continuous HDCP-encryption between the source and encoder
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 480p, 720p, 1080i and 1080p
- Support computer-video resolutions from 640x480 up to 1920x1200 and 2048x1080
- Support HDMI signals with RGB or YCrCb color space
- Accept RGBHV and RGsB analog signals
- Support vertical scan rates for RGB signals between 23.98 Hz and 85 Hz
- Support horizontal scan rates for RGB signals between 15 kHz and 100 kHz
- Support automatic sensing of the resolution and signal format of video inputs
- Support manual selection of signal format for video signal input
- Support HDMI embedded and analog stereo audio
- Support automatic detection of video source input resolutions
- Support 24 bit, 8 bit per color encoding and processing that is capable of maintaining the 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 2048x1080p and 1920x1200
- Support a low delay, encode and decode process of 70 ms
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support unicast streaming to up to four destination addresses
- Support unicast RTP, unicast TCP and IGMP multicast streaming applications
- Support audio breakaway streaming
- Offer adjustment over the Ethernet frame Maximum Transmission Unit – MTU
- Provide contact closure notice of definable warnings or alarms to support system monitoring
- Support automatic or manual negotiation of network link speed and duplex mode
- Support VLAN tagging
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support compatibility with a network appliance for recording and playing back audio, video, RS-232 or UDP data
- Support configuration and control in systems consisting of multiple codecs, encoders, decoders and recorder appliances from a central networked control unit
- Support encoding and decoding audio and video at bit rates from 500 kbps to 270 Mbps
- Maintain audio-video synchronization and synchronization of multiple channels of audio and video
- Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second.
- Offer independent control over spatial compression of luminance and chrominance information
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Support compression and encoding based on constant quality, variable spatial quality or frame rate based on bit rate targets
- Offer bit rate management based on: definable frame rates from 1 to 60 frames per second, adaptive frame dropping based on bit rate targets, adaptive spatial compression based on bit rate targets or combined adaptive spatial compression and adaptive frame dropping
- Supports compression of audio at various bit rates from 3 Mbps for program quality down to 400 kbps for voice grade applications
- Support intelligent power management including control over continuous operation and sleep mode as well as the video output detected by displays that apply intelligent power management
- Approved device shall be the Extron VNE 250 Encoder (60-1274-01; no alternates or equals)
- Rack mountable, one-half rack width, 1U high metal enclosure that encodes audio, video, USB keyboard and mouse, RS232 data and decodes return audio shall:
VND 250 Decoder
- Provide an HDCP-compliant decoder that supports low-delay, high quality streaming applications for computer-video or standard video resolutions, analog and digital audio, RS232, USB keyboard and mouse data and with return audio encoding
- Rack mountable, one-half rack width, 1U high metal enclosure that decodes audio, video, USB keyboard and mouse, RS232 data and encodes return audio shall:
- Provide an HDMI connector to supply video and embedded audio to a digital display system
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on rear panel for balanced/unbalanced line level stereo audio
- One set of captive screw connections on rear panel for balanced/unbalanced line level stereo audio return signals
- Provide front panel LCD display and controls for device configuration
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- One RS-232 captive screw connection on rear panel
- Provide one 10/100BASE-T RJ-45 network connection to provide access to AV system control devices
- Provide one 100/1000BASE-T RJ45 connector for transport of streaming data
- Provide one SFP socket for optional use of fiber-optic transceivers to provide optical Ethernet transport in place of the 100/1000BASE-T RJ45 streaming connection
- Provide four LED indicators for status monitoring
- Control LED to indicate status of control data
- Stream LED to indicate status of streamed data
- Status LED to indicate status of streamed source
- Alarm LED to indicate presence of a system fault
- Provide two USB connections for keyboard and mouse supporting remote control of a PC connected to an encoder
- Support bidirectional serial RS-232 control between external AV devices across an encoder and decoder connection
- Support two-way audio streaming capabilities to enable bi-directional audio communication between encoder and decoder
- Support decoding of HDCP-encrypted sources when an HDCP-compliant display is connected
- Maintain continuous HDCP-encryption between the decoder and display
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support decoding of video signals from 640x480 up to 1920x1200 and 2048x1080
- Support scaling of video signals at selectable resolutions from 640x480 up to 1920x1200 and 2048x1080
- Support streaming of signals at 60 frames per second at resolutions up to 2048x1080p and 1920x1200
- Support standard video resolutions including: 480p, 720p 1080i, and 1080p
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support 24 bit, 8 bit per color encoding and processing that is capable of maintaining the 4:4:4 color information throughout the entire encode-streaming-decode process
- Support a low delay, encode and decode process of 70 ms
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support unicast RTP, unicast TCP and IGMP multicast streaming applications
- Offer adjustment over the Ethernet frame Maximum Transmission Unit – MTU
- Provide contact closure notice of definable warnings or alarms to support system monitoring
- Support automatic or manual negotiation of network link speed and duplex mode
- Support VLAN tagging
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on screen messaging for device identification
- Support compatibility with a network appliance for recording and playing back audio, video, RS-232 or UDP data
- Support configuration and control in systems consisting of multiple codecs, encoders, decoders and recorder appliances from a central networked control unit
- Support decoding audio and video at bit rates from 500 kbps to 270 Mbps
- Maintain audio-video lip synchronization
- Provide a genlock and loop through connection supporting synchronizing across multiple decoders
- Support clean switching between sources when scaling the output to a defined resolution
- Support scaling of outputs to integer videowall magnification sizes such as 2x2
- Provide the following aspect ratio management options for displaying streaming sources:
- Decoded video fills display
- Decoded video maintains source’s original aspect ratio with no image cropping
- Provide an adjustable buffer supporting the ability to adapt to varying network latency conditions
- Support intelligent power management including control over continuous operation and sleep mode as well as the video output detected by displays that apply intelligent power management
- Approved device shall be the Extron VND 250 Decoder (60-1275-01; no alternates or equals)
- Rack mountable, one-half rack width, 1U high metal enclosure that decodes audio, video, USB keyboard and mouse, RS232 data and encodes return audio shall:
VND 250 Decoder
- Provide an HDCP-compliant decoder that supports low-delay, high quality streaming applications for computer-video or standard video resolutions, analog and digital audio, RS232, USB keyboard and mouse data and with return audio encoding
- Rack mountable, one-half rack width, 1U high metal enclosure that decodes audio, video, USB keyboard and mouse, RS232 data and encodes return audio shall:
- Provide an HDMI connector to supply video and embedded audio to a digital display system
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on rear panel for balanced/unbalanced line level stereo audio
- One set of captive screw connections on rear panel for balanced/unbalanced line level stereo audio return signals
- Provide front panel LCD display and controls for device configuration
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- One RS-232 captive screw connection on rear panel
- Provide one 10/100BASE-T RJ-45 network connection to provide access to AV system control devices
- Provide one 100/1000BASE-T RJ45 connector for transport of streaming data
- Provide one SFP socket for optional use of fiber-optic transceivers to provide optical Ethernet transport in place of the 100/1000BASE-T RJ45 streaming connection
- Provide four LED indicators for status monitoring
- Control LED to indicate status of control data
- Stream LED to indicate status of streamed data
- Status LED to indicate status of streamed source
- Alarm LED to indicate presence of a system fault
- Provide two USB connections for keyboard and mouse supporting remote control of a PC connected to an encoder
- Support bidirectional serial RS-232 control between external AV devices across an encoder and decoder connection
- Support two-way audio streaming capabilities to enable bi-directional audio communication between encoder and decoder
- Support decoding of HDCP-encrypted sources when an HDCP-compliant display is connected
- Maintain continuous HDCP-encryption between the decoder and display
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support decoding of video signals from 640x480 up to 1920x1200 and 2048x1080
- Support scaling of video signals at selectable resolutions from 640x480 up to 1920x1200 and 2048x1080
- Support streaming of signals at 60 frames per second at resolutions up to 2048x1080p and 1920x1200
- Support standard video resolutions including: 480p, 720p 1080i, and 1080p
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support 24 bit, 8 bit per color encoding and processing that is capable of maintaining the 4:4:4 color information throughout the entire encode-streaming-decode process
- Support a low delay, encode and decode process of 70 ms
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support unicast RTP, unicast TCP and IGMP multicast streaming applications
- Offer adjustment over the Ethernet frame Maximum Transmission Unit – MTU
- Provide contact closure notice of definable warnings or alarms to support system monitoring
- Support automatic or manual negotiation of network link speed and duplex mode
- Support VLAN tagging
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on screen messaging for device identification
- Support compatibility with a network appliance for recording and playing back audio, video, RS-232 or UDP data
- Support configuration and control in systems consisting of multiple codecs, encoders, decoders and recorder appliances from a central networked control unit
- Support decoding audio and video at bit rates from 500 kbps to 270 Mbps
- Maintain audio-video lip synchronization
- Provide a genlock and loop through connection supporting synchronizing across multiple decoders
- Support clean switching between sources when scaling the output to a defined resolution
- Support scaling of outputs to integer videowall magnification sizes such as 2x2
- Provide the following aspect ratio management options for displaying streaming sources:
- Decoded video fills display
- Decoded video maintains source’s original aspect ratio with no image cropping
- Provide an adjustable buffer supporting the ability to adapt to varying network latency conditions
- Support intelligent power management including control over continuous operation and sleep mode as well as the video output detected by displays that apply intelligent power management
- Approved device shall be the Extron VND 250 Decoder (60-1275-01; no alternates or equals)
- Rack mountable, one-half rack width, 1U high metal enclosure that decodes audio, video, USB keyboard and mouse, RS232 data and encodes return audio shall:
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

VN-Matrix 250シリーズ
HDCP準拠HDMI & RGB Video Over IPエンコーダー/デコーダー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。