最近閲覧した製品
USBA Pro Plenumシリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
USBA Pro P/15 - USB-A 5 Gbps Optical Extension Cable - 15' (4.5 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 15 feet (4.5 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/15, part number 26-728-15; no alternates or equals
USBA Pro P/15 - USB-A 5 Gbps Optical Extension Cable - 15' (4.5 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 15 feet (4.5 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/15, part number 26-728-15; no alternates or equals
USBA Pro P/25 - USB-A 5 Gbps Optical Extension Cable - 25' (7.6 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 25 feet (7.6 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/25, part number 26-728-25; no alternates or equals
USBA Pro P/25 - USB-A 5 Gbps Optical Extension Cable - 25' (7.6 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 25 feet (7.6 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/25, part number 26-728-25; no alternates or equals
USBA Pro P/35 - USB-A 5 Gbps Optical Extension Cable - 35' (10.6 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 35 feet (10.6 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/35, part number 26-728-35; no alternates or equals
USBA Pro P/35 - USB-A 5 Gbps Optical Extension Cable - 35' (10.6 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 35 feet (10.6 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/35, part number 26-728-35; no alternates or equals
USBA Pro P/50 - USB-A 5 Gbps Optical Extension Cable - 50' (15.2 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 50 feet (15.2 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/50, part number 26-728-50; no alternates or equals
USBA Pro P/50 - USB-A 5 Gbps Optical Extension Cable - 50' (15.2 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 50 feet (15.2 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/50, part number 26-728-50; no alternates or equals
USBA Pro P/65 - USB-A 5 Gbps Optical Extension Cable - 65' (19.8 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 65 feet (19.8 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/65, part number 26-728-65; no alternates or equals
USBA Pro P/65 - USB-A 5 Gbps Optical Extension Cable - 65' (19.8 m) Plenum
- Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Shall support USB data rates up to 5 Gbps (USB 3)
- Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
- Shall be backwards compatible with USB 2/1 devices
- Shall meet the following cable construction requirements:
- Multi-Mode fibers and 24 AWG tinned copper wires
- USB-A male plug for host and USB-A female connector for peripheral device connectivity
- USB-A male and USB-A female connectors with gold-plated contacts
- Plenum rated cable jacket
- Bend radius of 0.79" (20 mm)
- Cable outer diameter of 0.24” (6 mm)
- Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
- Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
- Max pull strength of 111 N (11.3 kg, 25 lbs)
- Cable shall be 65 feet (19.8 meters) in length
- Cable shall provide protection from outside electrical interference
- Cables shall comply with CE, UL-CMP standards
- Active cable circuitry shall derive power from the connected USB host device
- Cable shall consume no more than 450 mA of power
- Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
- Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
- Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
- Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
- Cable shall come with a Limited Lifetime Performance warranty
- Cable shall comply to the USB 3 standard established by the USB Implementers Forum, Inc.
- Approved cable shall be Extron USBA Pro P/65, part number 26-728-65; no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
USBA Pro Plenumシリーズ
SuperSpeed 5Gbps USB-A 3.2 光ファイバー延長ケーブル – Plenum
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari