UCS SW 313

UCS SW 313

1. Shall provide an input switching device with included rack mounting brackets that support USB data and AV signals
   1. Shall be a switcher for HDMI video and embedded digital audio signals with associated USB Host ports with a third USBC connection for AV, USB data and power delivery
      1. Shall support local device connection
      2. Shall support computer and video resolutions up to 5120x2160 at 30 Hz, 8-bit at 4:4:4 chroma sampling
      3. Shall support HDMI specifications including data rates up to 18 Gbps, HDR 10+, Dolby Vision, 12-bit Deep Color, 3D, and HD lossless audio formats
      4. Shall support DisplayPort 1.2 USB-C Alt Mode specifications including support for 2 or 4 lanes, RBR/1.62 Gbps, HBR/2.7 Gbps, and HBR2/5.4 Gbps
   2. Video Input Requirements
      1. Shall provide two female HDMI Type A connectors used to connect HDMI source devices
         1. Shall provide automatic input cable equalization up to 25 feet (8 meters) for signals up to 4096x2160 at 60 Hz with 8-bit color depth when used with Extron HDMI Pro cables
      2. Shall provide one female USB-C connector used to connect a USB-C source device for DisplayPort Alternate Mode video
   3. AV Output Requirements
      1. Shall provide one female HDMI Type A connector used to connect HDMI sink
      2. Shall provide automatic management of color bit depth based on the capabilities of the connected display, as reported by display EDID
      3. Shall support breakaway audio signal from input video signal
   4. EDID Requirements
      1. Shall include Extron EDID Minder technology for automatic management of EDID communication between connected devices
      2. User-selection of EDID from the connected display
      3. User-selection of EDID from pre-stored data files
      4. User upload of custom-generated EDID files
      5. Assignment of pre-stored, captured, or uploaded files
      6. Maintain continuous EDID communication with the connected sources
   5. HDCP Requirements
      1. Shall be HDCP 2.3 compliant
      2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
      3. Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
      4. Shall provide real-time verification of HDCP status for each HDMI input and output
      5. Electronically accessible over Ethernet, or USB connection
   6. Shall provide 250mW power on the output for active cables
   7. USB Input Requirements
      1. Shall provide two female USB 3.2 B connector used to connect USB Hosts for inputs 1 & 2
      2. Shall provide one female USB-C connector used to connect a USB-C source device for rates up to USB 10Gbps
      3. Shall support breakaway of USB signal from video signal
   8. USB Output Requirements
      1. Shall provide two blue female USB 3.2 A connectors used for USB 3.2 devices
         1. Provide 5V, 900 mA per USB 3.2 port
         2. Shall support data transfer rates up to USB 10Gbps
      2. Shall provide three black female USB 2.0 A connectors used for USB 2.0/1.x device ports
         1. Provide 5V, 500 mA per USB 2.0/1.x port
         2. Shall support data transfer rates up to High Speed
      3. Control Requirements
      4. Shall provide one (1) LAN port on rear panel for Ethernet control
      5. Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for display control
      6. Shall provide five (5) 3.5 mm, 2-pole captive screw connector on rear panel for contact closure remote control with tally output
      7. Shall support display control via RS-232 or Consumer Electronic Control (CEC) over HDMI output
      8. Shall provide one (1) USB-C connector on front panel for setup, configuration, and firmware update loading
      9. Shall support monitoring via control system or configuration utility of USB host and device status and video signal status
      10. Shall support configurable USB-C lane directions to enable 4-lane DisplayPort Alt Mode operation or 2 Lane DisplayPort, 2 lane USB 5Gbps or USB 10Gbps data
      11. Shall support a controllable USB hub with the ability to enable and disable individual ports or the entire hub via the control system or the configuration utility
      12. Shall support integrated power saving automation based on optional occupancy sensor or video signal presence
      13. Power Requirements
      14. Shall include an internal power supply supporting 100-240 VAC, 50/60 Hz power
          1. High demonstrated reliability
          2. Worldwide power compatibility
      15. Shall support a power-saving standby mode for additional energy efficiency
      16. General Requirements
      17. Shall support silent, fanless operation
      18. Shall be housed in a 1U high, half EIA rack-width metal enclosure
      19. Shall be rack mountable with optional 1U rack shelf
      20. Shall be furniture mountable with included brackets
      21. Shall provide visual signal on LED indicators located on front panel for auto-switch status, signal presence, HDCP authentication, USB host presence, USB device presence, and USB Power Delivery
      22. Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
      23. Shall support front panel security lockout to prevent unauthorized use in non-secure environments
      24. Shall include LockIt Plus HDMI cable lacing brackets
      25. Shall meet regulatory compliance
          1. Safety - CE, c-UL, UL
          2. EMI/EMC - CE, C-tick, FCC Class A, ICES, VCCI
      26. Shall provide at least a three-year parts and labor warranty
2. Approved device shall be the Extron UCS SW 313, part number 60-1797-02; no alternates or equals.