最近閲覧した製品
TLP Pro 1725TG
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
TLP Pro 1725TG
- Provide a 17.3" capacitive touchscreen interface for switching and control of AV equipment
- Tabletop 17.3" touchscreen user interface for AV and control systems
- Provide a 17.3" LCD touchscreen that supports up to 16M colors and 1920x1080 Full HD resolution
- Device shall support Extron IP Link Pro control processors and HC 400 Series systems
- Provide built-in speakers located in the bottom left and right corners of the touchpanel which can be configured to provide audio and button feedback
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues that also doubles as an XTP video receiver; in addition, the port is capable of being powered using an included high-power injector
- Device shall have two USB inputs on the back of the touchpanel for future expansion
- Provide integrated red/green LED status light located in the upper center of the touchpanel and one on the rear center of the panel, which can be configured or programmed
- Provide a built-in motion sensor located below the center of the touch surface allowing the panel to be woken from a sleep state or set up via software to trigger any number of actions
- Provide a light sensor located on the top bezel of the touchpanels that automatically adjusts the LCD screen’s backlight based on available ambient light
- Device shall have a female HDMI jack located on the back of the panel that supports HDCP-compliant video sources
- Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
- Device shall have a 3.5 mm headphone jack that will provide local audio out of the touchpanel
- Device shall have a menu button located on the back of the touchpanel for setup of items such as IP address and sound volume at minimum
- Device shall have the following memory available, at minimum:
- SDRAM
- 2 GB
- Flash
- 8 GB
- SDRAM
- Device shall have an optional 12-volt DC Plug connection located on the back of the panel should a high-power injector not be available
- Device shall include a multi-function button that allows for the reset of the device or its communication properties at minimum
- Device shall have the ability to be controlled by an HTML5 and JavaScript enabled web browser, or an iOS or Android based device as a secondary point of control.
- Device shall be black in color
- Mounting requirements
- Device shall have the ability to sit on a tabletop with a base that can be secured using the threaded holes in the base of the touchpanel and while using owner furnished screws
- Device’s base shall be removable and allow for the touchpanel to accommodate being mounted using a VESA D 100 mm panel mount kit
- Device’s base shall be weighted and allow for up to 40° of tilt
- Device shall have a built-in security slot located in the rear of its base that allows it to be secured using a Kensington lock
- Device’s base shall be able to be securely rotated horizontally ±180° with an optional swivel mount adapter
- Software requirements
- User interface shall be created using Extron’s GUI Designer software.
- The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software.
- Security requirements
- Device shall support SFTP and SSH for secure communication between the control processor and TouchLink Pro touchpanel.
- Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- UL
- c-UL
- C-Tick
- FCC Class B
- ICES
- VCCI
- RoHS
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Shall provide 1-year touchscreen and overlay components
- Approved device shall be the Extron TLP Pro 1725TG, part number 60-1792-02, no alternates or equals
- Tabletop 17.3" touchscreen user interface for AV and control systems
TLP Pro 1725TG
- Provide a 17.3" capacitive touchscreen interface for switching and control of AV equipment
- Tabletop 17.3" touchscreen user interface for AV and control systems
- Provide a 17.3" LCD touchscreen that supports up to 16M colors and 1920x1080 Full HD resolution
- Device shall support Extron IP Link Pro control processors and HC 400 Series systems
- Provide built-in speakers located in the bottom left and right corners of the touchpanel which can be configured to provide audio and button feedback
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues that also doubles as an XTP video receiver; in addition, the port is capable of being powered using an included high-power injector
- Device shall have two USB inputs on the back of the touchpanel for future expansion
- Provide integrated red/green LED status light located in the upper center of the touchpanel and one on the rear center of the panel, which can be configured or programmed
- Provide a built-in motion sensor located below the center of the touch surface allowing the panel to be woken from a sleep state or set up via software to trigger any number of actions
- Provide a light sensor located on the top bezel of the touchpanels that automatically adjusts the LCD screen’s backlight based on available ambient light
- Device shall have a female HDMI jack located on the back of the panel that supports HDCP-compliant video sources
- Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
- Device shall have a 3.5 mm headphone jack that will provide local audio out of the touchpanel
- Device shall have a menu button located on the back of the touchpanel for setup of items such as IP address and sound volume at minimum
- Device shall have the following memory available, at minimum:
- SDRAM
- 2 GB
- Flash
- 8 GB
- SDRAM
- Device shall have an optional 12-volt DC Plug connection located on the back of the panel should a high-power injector not be available
- Device shall include a multi-function button that allows for the reset of the device or its communication properties at minimum
- Device shall have the ability to be controlled by an HTML5 and JavaScript enabled web browser, or an iOS or Android based device as a secondary point of control.
- Device shall be black in color
- Mounting requirements
- Device shall have the ability to sit on a tabletop with a base that can be secured using the threaded holes in the base of the touchpanel and while using owner furnished screws
- Device’s base shall be removable and allow for the touchpanel to accommodate being mounted using a VESA D 100 mm panel mount kit
- Device’s base shall be weighted and allow for up to 40° of tilt
- Device shall have a built-in security slot located in the rear of its base that allows it to be secured using a Kensington lock
- Device’s base shall be able to be securely rotated horizontally ±180° with an optional swivel mount adapter
- Software requirements
- User interface shall be created using Extron’s GUI Designer software.
- The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software.
- Security requirements
- Device shall support SFTP and SSH for secure communication between the control processor and TouchLink Pro touchpanel.
- Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- UL
- c-UL
- C-Tick
- FCC Class B
- ICES
- VCCI
- RoHS
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Shall provide 1-year touchscreen and overlay components
- Approved device shall be the Extron TLP Pro 1725TG, part number 60-1792-02, no alternates or equals
- Tabletop 17.3" touchscreen user interface for AV and control systems
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
TLP Pro 1725TG
TouchLink Pro卓上型17インチタッチパネル
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari