最近閲覧した製品
SW USBシリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
SW4 USB Plus
-
Provide a switcher that shall support one USB host and up to four USB peripheral devices
-
Rack-mountable switcher for USB devices
- Device shall support USB 1.0, 1.1, or 2.0 standards
- Device shall support data transfer rates up to 480 mbps
-
Device shall support one USB host
- Host port shall emulate the presence of a human interface device, such as a keyboard or mouse, without such a device being connected to a peripheral port
-
Device shall support up to four USB peripheral devices
- Peripheral ports shall emulate the presence of a host device whenever the peripheral is not actively connected to the host
- Peripheral ports shall each provide +5 VDC, 500 mA power per USB 2.0 specification
- Front panel shall provide physical buttons for selection of input signals
-
Provide one RS-232 serial control port
- Device shall support the pass-through of serial commands to another connected device
- Device shall be housed in a 1 RU, one-half EIA rack width metal enclosure
- Device shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- Approved device shall be the Extron SW4 USB Plus, part number 60-954-02; no alternates or equals
-
Rack-mountable switcher for USB devices
SW4 USB Plus
-
Provide a switcher that shall support one USB host and up to four USB peripheral devices
-
Rack-mountable switcher for USB devices
- Device shall support USB 1.0, 1.1, or 2.0 standards
- Device shall support data transfer rates up to 480 mbps
-
Device shall support one USB host
- Host port shall emulate the presence of a human interface device, such as a keyboard or mouse, without such a device being connected to a peripheral port
-
Device shall support up to four USB peripheral devices
- Peripheral ports shall emulate the presence of a host device whenever the peripheral is not actively connected to the host
- Peripheral ports shall each provide +5 VDC, 500 mA power per USB 2.0 specification
- Front panel shall provide physical buttons for selection of input signals
-
Provide one RS-232 serial control port
- Device shall support the pass-through of serial commands to another connected device
- Device shall be housed in a 1 RU, one-half EIA rack width metal enclosure
- Device shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
- Approved device shall be the Extron SW4 USB Plus, part number 60-954-02; no alternates or equals
-
Rack-mountable switcher for USB devices
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

SW USBシリーズ
2入力/4入力USBスイッチャー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。