| VNM Enterprise Controller 201 |
|
| Hardware |
| Motherboard | 1 Supermicro Mini-iTx 1xPCI-E x2 |
| Chipset | Socket FCBGA1170, Intel® Celeron Processor J1900, 2M Cache, up to 2.42 GHz, 8W
|
| RAM | (2) 2 GB non-ECC DDR3 |
| Storage | (1) 80 GB SATA (removable) |
| Video output (for troubleshooting only) | |
| HDMI | 1 female HDMI type A |
| DisplayPort | 1 female DisplayPort |
| VGA | 1 female 15-pin HD (RGBHV) |
|
| Software |
| Operating system | Red Hat® Linux Enterprise 7 |
|
| Communications |
| Graphics card | Intel® HD Graphics with HDMI, Display port and VGA with 1 female 15-pin HD connector |
| Serial control | |
| Serial control port | 1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole |
| Host control | Dual mode - host control (Extron SIS) or IP to serial pass-through (for display control). Both bidirectional. |
| Baud rate and protocol | 300, 600, 1200, 1800, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200 baud, adjustable; 7 or 8 (default) data bits; 1 (default) or 2 stop bits; no parity (default), or odd, even, mark, or space parity; no flow control (default), or software flow control |
| Pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
| USB | |
| USB control ports | 1 USB 3.0 port, 1 USB 2.0 port (Rear panel) |
| USB configuration ports | 1 USB 2.0 mini-B (front panel) |
| USB standards | USB 2.0, USB 3.0 |
| Ethernet | |
| Ethernet control ports | 2 RJ-45 female connectors |
| Ethernet data rate | 10/100/1000Base-T, half/full duplex |
| Ethernet protocol | TCP/IP, ARP, DHCP, ICMP (ping), Telnet, HTTP, SMTP, SNMP v2c, MIB‑II (RFC 3416/17/18), HTTPS, TLS/SSL |
| Ethernet default settings | IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Default gateway = 192.168.254.1
DHCP = off |
|
| USB device ports |
| Number/signal type | (2) 1-port USB hubs |
| Connector | 1 female USB 2.0 type A
1 female USB 3.0 type A |
| Maximum built-in USB hubs | 1 |
| Minimum built-in USB hubs | 1 |
| Available USB power | USB 2.0 port = 500 mA
USB 3.0 port = 900 mA |
|
| General |
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 16 watts typical |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan |
| Thermal dissipation | 35.1 BTU/hr |
| Mounting | |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 1.66" H x 8.7" W x 11.97" D (1U high, half rack wide)
(4.2 cm H x 22.1 cm W x 30.5 cm D)
(Depth excludes connectors. Width excludes rack ears.) |
| Product weight | 3.4 lbs (1.5 kg) |
| Regulatory compliance | CE, CSA, c-UL, EN, FCC Class A, IEC, UL |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (5446-D2) |