| SVEQ 100 Series |
|
| Video |
|---|
| Gain | Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable
C of S-video: 0 dB to +10 dB (x1 to x3), adjustable |
| Equalization | 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable |
| Bandwidth (Y of S-video) | 185 MHz (-3 dB) |
| Output cable driving distance | Up to 1000' (300 m) with Extron MHR cable |
|
| Video input |
|---|
| Number/signal type | 1 S-video |
| Connectors | |
| SVEQ 100 | 2 female BNC |
| SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP | 1 female 4-pin mini DIN |
| Nominal level | 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | For Y: 0.4 to 2.0 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Return loss | <-25 dB @ 0 to 5 MHz |
| DC offset (max. allowable) | 4.0 V |
| Input coupling | AC |
|
| Video output |
|---|
| Number/signal type | 1 S-video |
| Connectors | |
| SVEQ 100 | 2 female BNC |
| SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP | 2 female BNC attached via 4" pigtails |
| Nominal level | 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.4 to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on input signal content |
|
| Sync |
|---|
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | 0.015% @ 1 kHz at nominal level |
| S/N | >100 dB at maximum output (unweighted) |
| Stereo channel separation | >80 dB @ 1 kHz |
| Output cable driving distance | Up to 1000' (300 m) with Extron SHR cable |
|
| Audio input |
|---|
| Number/signal type | 1 stereo unbalanced |
| Connectors | 2 RCA female |
| Impedance | 20k ohms unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +8 dBu (2.5 V), unbalanced at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | |
| SVEQ 100 | 1 stereo, balanced/unbalanced |
| All other models | 1 stereo or dual mono (switch-selectable), balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Nominal level | -10 dBV (316 mVrms), unbalanced; -2 dBu (632 mV), balanced output |
| Maximum level | +9 dBV (2.8 V) unbalanced, +17 dBu (5.6 V) balanced at 1% THD+N with a 10k ohm load |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements | 12 VDC, 0.2 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount |
| SVEQ 100 | Yes, with optional 1U rack shelf |
| All other models | No, but wall or furniture mountable |
| Furniture mount | |
| SVEQ 100 | Yes, with optional mounting kits |
| SVEQ 100 D | Yes, directly, or with a standard electrical wall box or mud ring |
| All other models | Yes, with optional AAP or MAAP mounting faceplates |
| Enclosure type |
| SVEQ 100 | Metal |
| SVEQ 100 D | Metal rear enclosure, plastic faceplate |
| SVEQ 100 AAP | Metal faceplate, open at rear |
| SVEQ 100 MAAP | Metal faceplate, metal rear enclosure |
| Enclosure dimensions | |
| SVEQ 100 | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 11.0 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| SVEQ 100 D |
| Faceplate | 2.6" H x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora® faceplate. *Height is 3.8" [9.5 cm], including mounting tabs.)
(Depth excludes connectors.) |
| Device | 2.7" H x 1.8" W x 0.75" D
(6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors; height excludes mounting tabs.) |
| SVEQ 100 AAP | |
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 7.1 cm W x 0.3 cm D) (double space high AAP plate) |
| Device | 1.1" H x 2.8 " W x 1.2" D (2.8 cm H x 7.0 cm W x 3.0 cm D)
(Depth excludes connectors.) |
| SVEQ 100 MAAP | |
| Faceplate | 2.1" H x 2.2" W x 0.1" D (5.3 cm H x 5.7 cm W x 0.3 cm D) (three space MAAP plate) |
| Device | 2.0" H x 1.4" W x 1.2" D (5 cm H x 3.6 cm W x 3.0 cm D)
(Depth excludes connectors.) |
| Product weight |
| SVEQ 100 | 0.7 lbs (0.3 kg) |
| All other models | 0.2 lbs (0.1 kg) |
| Shipping weight |
| SVEQ 100 | 3 lbs (2 kg) |
| All other models | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-082109-D7) |