| MLS 506 Series |
|
| Video |
|---|
| Gain | Unity |
| Bandwidth | 350 MHz (-3 dB), fully loaded |
| Frequency response | < ±0.1 dB @ 30 MHz |
| Differential phase error | 1.5° at 3.58 MHz and 4.43 MHz |
| Differential gain error | 1.5% at 3.58 MHz and 4.43 MHz |
| Crosstalk | -50 dB @ 5 MHz |
|
| Video input |
|---|
| Number/signal type | 3 RGBHV, RGBS, RGsB, or RsGsBs
3 component video, S-video, or composite video |
| Connectors | Female BNCs |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-45 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
|
| Video output |
|---|
| Number/signal type | 1 RGBHV, RGBS, RGsB, or RsGsBs
1 component video
1 S-video
1 composite video |
| Connectors | Female BNCs |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset (follows input) |
| Impedance | 75 ohms |
| Return loss | -45 dB @ 5 MHz |
| DC offset | ±5 mV |
| Switching type | Triple-Action for RGB |
|
| Sync |
|---|
| Input/output type | RGBHV, RGBS, RGsB, RsGsBs (output follows input) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2 V to 5 Vp-p |
| Output level | TTL: 5.0 Vp-p |
| Input impedance | >1k ohms |
| Output impedance | 75 ohms, unterminated |
| Max. input voltage | 5 Vp-p |
| Max. propagation delay | 30 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio |
|---|
| Gain: line level, fixed output | |
| MLS 506 | |
| Unbalanced | 0 dB |
| Balanced | +6 dB |
| MLS 506MA/506SA | |
| Unbalanced | 0 dB |
| Balanced | +6 dB |
| Gain: line level, variable output | Selectable output level |
| MLS 506 | |
| Unbalanced | 0 dB (jumper selectable), or
-6 dB (jumper selectable, default) |
| Balanced | +6 dB (jumper selectable), or
0 dB (jumper selectable, default) |
| MLS 506MA, MLS 506SA | |
| Unbalanced | 0 dB (jumper selectable), or
-6 dB (jumper selectable, default) |
| Balanced | +6 dB (jumper selectable), or
0 dB (jumper selectable, default) |
| Frequency response | |
| MLS 506 | 20 Hz to 20 kHz, +0 dB/-3 dB |
| MLS 506MA | 50 Hz to 15 kHz, +0 dB/-3 dB; 20 Hz to 20 kHz, +0 dB/-3 dB at 30 watts into 8 ohms |
| MLS 506SA | 20 Hz to 20 kHz, ±3 dB at 25 W into 8 ohms |
| THD + Noise | |
| MLS 506 | <0.2% @ 50 Hz to 22 kHz at nominal level |
| MLS 506MA (amp. output) | <1% @ 50 Hz to 20 kHz at 30 watts into 8 ohms
<0.5% @ 1 kHz at 30 watts into 8 ohms |
| MLS 506SA (amp. output) | <0.5% @ 1 kHz at 25 W into 8 ohms |
| S/N | >75 dB at 20 Hz to 20 kHz (unweighted) |
| Crosstalk | <-65 dB @ 20 Hz to 20 kHz, <-80 dB @ 1 kHz and below 60 Hz, fully loaded |
| Stereo channel separation | |
| MLS 506SA | >80 dB @ 1 kHz |
| All other models | >90 dB @ 1 kHz |
| CMRR | >90 dB @ 20 Hz to 200 Hz, >60 dB @ 20 Hz to 20 kHz |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.
+4 dBu and 0 dBu are professional audio line level standards.
-10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards. |
|
|
| Audio input |
|---|
| Number/signal type | |
| MLS 506 | 6 stereo, balanced/unbalanced |
| MLS 506MA/SA | 7 stereo, balanced/unbalanced |
| Connectors | |
| MLS 506 | (6) 3.5 mm captive screw connectors, 5-pole |
| MLS 506MA/SA | (7) 3.5 mm captive screw connectors, 5-pole |
| Impedance | >18k ohms unbalanced/balanced, DC coupled |
| Nominal level | -20 dBV (100 mVrms), -10 dBV (316 mVrms), 0 dBu (0.775 Vrms), or +4 dBu
(1.23 Vrms); (configurable) |
| Maximum level | +21 dBu (balanced or unbalanced) at 1% THD+N |
| Input gain adjustment | |
| MLS 506 | -15 dB to +9 dB, adjustable per input |
| Input level adjustment | |
| MLS 506MA, MLS 506SA | -42 dB to +24 dB, 1 to 100 steps, adjustable per input |
| Input level sensitivity | |
| MLS 506MA/SA | -20 dBV (100 mVrms) for 30 watt output |
|
| Audio — effects return (MLS 506MA and MLS 506SA) |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 3 pole |
| Impedance | >10k ohms, unbalanced |
| Level | +4 dBu, unbalanced |
|
| Audio — effects send (MLS 506MA and MLS 506SA) |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 3 pole |
| Impedance | 50 ohms, unbalanced |
| Level | +4 dBu, unbalanced |
|
| Audio output — line level (all models) |
|---|
| Number/signal type | 2 stereo/mono (selectable), balanced/unbalanced (1 fixed, 1 variable) |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced at 1%THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced at 1%THD+N |
|
| Audio output — power amp (MLS 506MA and MLS 506SA) |
|---|
| Number/signal type | |
| MLS 506MA | 1 mono |
| MLS 506SA | 1 stereo |
| Connectors | (1) 4 position screw terminal |
| Drive/power (full power out) | At less than 0.5% THD at 1 kHz: |
| MLS 506MA (70V, mono) | 30 watts (rms); 4 ohm, 8 ohm, or 70 V output taps with common/ground, transformer coupled |
| MLS 506MA (100V, mono) | 30 watts (rms); 4 ohm, 8 ohm, or 100 V output taps with common/ground, transformer coupled |
| MLS 506SA (stereo) | 50 watts; 25 watts (rms) per channel, 4 ohm or 8 ohm load |
| Protection | |
| MLS 506MA | Input limiting, thermal, short circuit |
| MLS 506SA | Input limiting (user specifies 4 ohm or 8 ohm load), thermal, short circuit |
| Indication | |
| MLS 506MA | Clip LED indicates the onset of 30 watt power limiting |
| MLS 506SA | Clip LED indicates the onset of 25 watt power limiting on left or right |
|
| Control/remote — switcher |
|---|
| Serial control port | 1 RS-232, female 9-pin D connector (shared with contact closure port)
(1) 3.5 mm captive screw connector, 5 pole (for control via MLC 206; shared with IR control port) |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND |
| Contact closure | 1 female 9-pin D connector (shared with serial control port) |
| Contact closure pin configuration | pin 1 = input 1, pin 4 = input 2, pin 5 = ground, pin 6 = input 3,
pin 7 = input 4, pin 8 = input 5, pin 9 = input 6 |
| IR control port | (1) 3.5 mm captive screw connector, 5 pole (shared with the MLC/IR serial control port) for 38 kHz IR signals |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)™ |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50-60 Hz, internal |
| MLS 506 | 20 watts |
| MLS 506MA | 60 watts |
| MLS 506SA | 80 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on both sides and top |
| Mounting | |
| Rack mount | Yes, with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 3.5" H x 17.5" W x 9.4" D (2U high, full rack wide)
8.9 cm H x 44.4 cm W x 23.9 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | |
| MLS 506 | 7.0 lbs (3.2 kg) |
| MLS 506MA | 10.2 lbs (4.6 kg) |
| MLS 506SA | 8.6 lbs (3.9 kg) |
| Shipping weight | |
| MLS 506 | 14 lbs (7 kg) |
| MLS 506MA | 17 lbs (8 kg) |
| MLS 506SA | 16 lbs (8 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| Compliances | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-091609-D12) |