| Matrix 12800 Series |
|
| Video — wideband/video BMEs |
|---|
| Routing | 32 x 16 or larger matrix up to 128 x 128, depending on the configuration |
| Gain | Unity |
| Bandwidth |
| Wideband models | 375 MHz (-3 dB), fully loaded |
| 0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz | No more than +4 dB to -.25 dB |
| Video models | 150 MHz (-3 dB), fully loaded |
| 0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz | No more than +0.5 dB to -0.5 dB |
| Phase between I/Os | <1.28° at 3.58 MHz |
| Differential phase error | 0.1%, 3.58 to 4.43 MHz |
| Differential gain error | 0.1°, 3.58 to 4.43 MHz |
| Max. propagation of delay | 5 ns typical (±1 ns) |
| Crosstalk | -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz |
| Switching speed | 200 ns (max.) |
|
| Video input — wideband/video BMEs |
|---|
| Number/signal type | |
| Wideband models | Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video |
| Video models | Up to 128 (usable quantity varies with configuration) component video, S-video, composite video |
| Connectors | 128 female BNC (usable quantity varies with model) |
| Nominal levels | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.5 V to 1.5 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
|
| Video output — wideband/video BMEs |
|---|
| Number/signal type | Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video |
| Connectors | 128 female BNC (usable quantity varies with model) |
| Nominal levels | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Maximum level | 2 Vp-p |
| Impedance | 75 ohms |
| Return loss | -25 dB to input section @ up to 50 MHz |
| DC offset | ±10 mV typical with input at 0 offset |
| Switching type | Triple-Action™ |
| Slew rate | >200 V/ms |
|
| Sync — sync BME |
|---|
| Input and output types | Software configurable for RGBHV or RGBS |
| Sync connectors | Up to 128 female BNC (usable quantity varies with configuration) |
| Input level | 0.5 V to 5 Vp-p (4 Vp-p nominal) |
| Output level | 5 Vp-p |
| Gain | AGC to TTL: 4.0 V to 5.0 Vp-p |
| Input impedance | Inputs 1 - 32: 510 ohms or 75 ohms, switchable
Inputs 33 - 128: 510 ohms |
| Output impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Polarity | Positive or negative (follows input) |
|
| Audio — audio BME |
|---|
| Routing | 16 x 16 up to 128 x 128 mono or stereo matrix (in increments of 16), balanced/unbalanced |
| Gain (selectable per output) | Unbalanced output: 0dB (as shipped), or -6 dB (jumper-selectable)
Balanced output: +6 dB (as shipped), or 0 dB (jumper-selectable) |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 20 Hz to 20 kHz, +15 dBu input, +21 dBu output |
| S/N | >85 dB, balanced, at rated maximum output |
| Crosstalk | <-70 dB @ 20 Hz to 20 kHz fully loaded |
| Stereo channel separation | >70 dB @ 20 Hz to 20 kHz |
| CMRR | >+75 dB, 20 Hz to 20 kHz |
|
| Audio input — audio BME |
|---|
| Number/signal type | 16 to 128 (in increments of 16) mono or stereo, balanced/unbalanced |
| Connectors | (16 to 128) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >10k ohms unbalanced/balanced, DC coupled |
| Nominal level | +4 dBu (1.23V), 0 dBu (0.775 V), -10 dBV (316 mV), -20 dBV (100 mV) |
| Maximum level | +21.5 dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment | -24 dB to +9 dB, adjustable per input via RS-232 control or front panel |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — audio BME |
|---|
| Number/signal type | 16 up to 128 (in increments of 16) mono or stereo, balanced/unbalanced |
| Connectors | (16 to 128) 3.5 mm captive screw connectors, 5 pole (quantity varies with configuration) |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+26.0 dBu, balanced at 1%THD+N |
| Maximum level (600 ohm) | >+24.0 dBm, balanced at 1%THD+N |
|
| Control/remote — switcher |
|---|
| Serial control port | RS-232 or RS-422, female 9-pin D connector |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND |
| Ethernet control port | 1 female RJ-45 connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, HTTP, SMTP, Telnet |
| System intercommunications | 2 RJ-45 connectors |
| Remote key pad control | (2) 5 mm, 5-pole captive screw connectors |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Netscape® Navigator®, Telnet |
|
| General |
|---|
| Power* | 2 (positive-negative), 100 VAC to 240 VAC, 50-60 Hz; internal
Matrix 12800 wideband: 150 watts at 115 VAC, 60 Hz
Matrix 12800 sync: 100 watts at 115 VAC, 60 Hz
Matrix 12800 audio: 300 watts at 115 VAC, 60 Hz
*A redundant power supply is available. |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, air flows from front to sides |
| Mounting | |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 17.5" H x 17.0" W x 16.0" D (10U high, full rack wide)
44.4 cm H x 43.2 cm W x 40.6 cm D
(Depth excludes connectors. Width excludes rack ears.) |
| Product weight | |
| Matrix 12800 wideband | 57.4 lbs (26.0 kg) |
| Matrix 12800 sync | 54.0 lbs (24.5 kg) |
| Matrix 12800 audio | 43.9 lbs (19.9 kg) |
| Shipping weight | |
| Matrix 12800 wideband | 76.7 lbs (35 kg) |
| Matrix 12800 sync | 73.3 lbs (34 kg) |
| Matrix 12800 audio | 66 lbs (30 kg) |
| DIM weight, international | 77 lbs (35 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-092109-D7) |