| IPL 250 |
|
| Software |
|---|
| Configuration software | Global Configurator® 3 for Windows® |
| Utilities | Extron Simple Instruction Set™ (SIS™)
Telnet, embedded web page, Global Viewer |
|
| Ethernet |
|---|
| Network interface controllers (NICs) | 1 |
| Connectors | 1 RJ-45 female connector |
| Data rate | 10/100Base-T, half/full duplex with autodetect |
| Protocols | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet |
| Default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory |
|
| Serial |
|---|
| Quantity/type | 3 bidirectional RS-232 |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole |
| Baud rate and protocol | 300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity |
| NOTE | The 5-pole port supports both hardware and software flow control.
The 3-pole ports support software flow control. |
|
| Pin configurations | |
| Serial, 5-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS |
| Serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = Gnd |
|
| IR |
|---|
| Quantity/type | 4 IR (carrier and non-carrier) |
| Connectors | (2) 3.5 mm captive screw connectors, 4 pole |
| IR output carrier frequency | 30 kHz to 1 MHz |
| Pin configurations | Pins 1, 3, 5, 7 = IR signal ports 1, 2, 3, 4 (respectively)
Pins 2, 4, 6, 8 = Gnd |
| IR learning carrier frequency | 30 kHz to 1 MHz |
| IR learning capture distance | 2" (5.1 cm) to 12" (30.5 cm) from the front panel |
|
| Relay |
|---|
| Quantity/type | 4 normally open relays |
| Relay control connectors | (2) 3.5 mm captive screw connectors, 4 pole |
| Relay control contact rating | 24 V, 1 A |
|
| Contact closure |
|---|
| Quantity/type | 4 contact closure inputs |
| Contact input control connector | (1) 3.5 mm captive screw connector, 5 pole |
| Contact closure (input only) | |
| Input voltage range | 0 to 5 VDC, clamped at +5.1 V |
| Input impedance | 10k ohms |
| Threshold | 1.6 VDC |
| Pin configuration | Pins 1, 2, 3, 4 = inputs 1, 2, 3, 4; pin 5 = Gnd |
|
| General |
|---|
| Power supply | External, included
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| Power input requirements | 12 VDC, 0.5 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | Under-furniture mountable with optional kit |
| Projector mount | Yes, with optional projector mount kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight | 0.7 lbs (0.3 kg) |
| Shipping weight | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | CE, C-Tick, c-UL, FCC Class A, ICES, KC, UL, VCCI
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety.
Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (5620-D6) |