最近閲覧した製品
PowerCage FOX Rx HDMI
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
PowerCage FOX Rx HDMI MM
- Shall provide a fiber optic receiver on a double-slot board that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control signals
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of digital video, audio, and control signals over multimode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with or without embedded audio
- Shall support video resolutions up to 1920x1200, including 1080p at 60 Hz
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced analog stereo audio
- Shall provide one (1) toggle switch to enable/disable HDMI audio pass-through
- Shall provide audio muting capability
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a full green screen signal for visual confirmation when encrypted content is sent to a non-compliant display device
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for RS-232 pass-through over fiber
- Interconnection requirement
- Shall provide two (2) LC-type connectors for interconnection between the transmitter and receiver
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Transmission requirements
- Shall support extension of video, audio, and control signals over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for setup, control, and configuration
- Shall support module setup and configuration via the config port on the PowerCage 1600 enclosure front panel
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicators for HDMI signal presence, HDCP authentication, audio signal presence, and power
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide three (3) internal test patterns consisting of grayscale, color bars, and alternating pixels for display calibration and setup
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall include Extron LockIt® HDMI cable lacing brackets
- Shall provide three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA transmitters, as well as the FOXBOX T HD-SDI
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron PowerCage FOX Rx HDMI MM (70-889-21); no alternates or equals
PowerCage FOX Rx HDMI MM
- Shall provide a fiber optic receiver on a double-slot board that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control signals
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of digital video, audio, and control signals over multimode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with or without embedded audio
- Shall support video resolutions up to 1920x1200, including 1080p at 60 Hz
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced analog stereo audio
- Shall provide one (1) toggle switch to enable/disable HDMI audio pass-through
- Shall provide audio muting capability
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a full green screen signal for visual confirmation when encrypted content is sent to a non-compliant display device
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for RS-232 pass-through over fiber
- Interconnection requirement
- Shall provide two (2) LC-type connectors for interconnection between the transmitter and receiver
- Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
- Transmission requirements
- Shall support extension of video, audio, and control signals over multimode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 laser optimized multimode fiber optic cabling
- Shall support an optical loss budget of at least 7 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for setup, control, and configuration
- Shall support module setup and configuration via the config port on the PowerCage 1600 enclosure front panel
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicators for HDMI signal presence, HDCP authentication, audio signal presence, and power
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide three (3) internal test patterns consisting of grayscale, color bars, and alternating pixels for display calibration and setup
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall include Extron LockIt® HDMI cable lacing brackets
- Shall provide three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA transmitters, as well as the FOXBOX T HD-SDI
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron PowerCage FOX Rx HDMI MM (70-889-21); no alternates or equals
PowerCage FOX Rx HDMI SM
- Shall provide a fiber optic receiver on a double-slot board that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control signals
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of digital video, audio, and control signals over singlemode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with or without embedded audio
- Shall support video resolutions up to 1920x1200, including 1080p at 60 Hz
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced analog stereo audio
- Shall provide one (1) toggle switch to enable/disable HDMI audio pass-through
- Shall provide audio muting capability
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a full green screen signal for visual confirmation when encrypted content is sent to a non-compliant display device
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for RS-232 pass-through over fiber
- Interconnection requirement
- Shall provide two (2) LC-type connectors for interconnection between the transmitter and receiver
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Transmission requirements
- Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for setup, control, and configuration
- Shall support module setup and configuration via the config port on the PowerCage 1600 enclosure front panel
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicators for HDMI signal presence, HDCP authentication, audio signal presence, and power
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide three (3) internal test patterns consisting of grayscale, color bars, and alternating pixels for display calibration and setup
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall include Extron LockIt® HDMI cable lacing brackets
- Shall provide three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA transmitters, as well as the FOXBOX T HD-SDI
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron PowerCage FOX Rx HDMI SM (70-889-22); no alternates or equals
PowerCage FOX Rx HDMI SM
- Shall provide a fiber optic receiver on a double-slot board that shall support the long-haul transmission of HDMI video, stereo audio, and RS-232 control signals
- Double-slot board designed for the Extron PowerCage 1600 enclosure
- Long distance signal extension of digital video, audio, and control signals over singlemode fiber optic cable
- Video output requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with or without embedded audio
- Shall support video resolutions up to 1920x1200, including 1080p at 60 Hz
- Audio output requirements
- Shall support two-channel embedded audio on HDMI output connector
- Shall support audio de-embedding from HDMI signal
- Shall provide one (1) five-pole captive screw connector for balanced/unbalanced analog stereo audio
- Shall provide one (1) toggle switch to enable/disable HDMI audio pass-through
- Shall provide audio muting capability
- HDCP requirements
- Shall be HDCP compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
- Shall provide a full green screen signal for visual confirmation when encrypted content is sent to a non-compliant display device
- AV device control requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for RS-232 pass-through over fiber
- Interconnection requirement
- Shall provide two (2) LC-type connectors for interconnection between the transmitter and receiver
- Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
- Transmission requirements
- Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
- Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
- Shall support an optical loss budget of at least 13 dB between transmitter and receiver
- Setup, control, and configuration requirements
- Shall provide one (1) bidirectional RS-232 three-pole captive screw connector for setup, control, and configuration
- Shall support module setup and configuration via the config port on the PowerCage 1600 enclosure front panel
- Shall provide one (1) two-pole captive screw connector for a contact closure output to trigger an external control system for alarm notification in case of fiber link loss
- Power requirements
- Shall be supplied power by a PowerCage 1600 enclosure
- General requirements
- Shall provide visual signal on LED indicators for HDMI signal presence, HDCP authentication, audio signal presence, and power
- Shall be installed in an Extron PowerCage 1600 enclosure
- Shall be hot-swappable
- Shall include Auto Input Memory capability to automatically store and recall position and detail settings based on the incoming signal
- Shall provide thirty (30) user memory presets to save and recall position and detail settings based on the incoming signal
- Shall provide three (3) internal test patterns consisting of grayscale, color bars, and alternating pixels for display calibration and setup
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Appropriate requirements of RoHS, WEEE
- Shall include Extron LockIt® HDMI cable lacing brackets
- Shall provide three (3) years parts and labor warranty
- Shall be compatible with Extron FOX Series HDMI, DVI, and VGA transmitters, as well as the FOXBOX T HD-SDI
- Shall be compatible with Extron FOX Series matrix switchers to create an HDCP-compliant signal distribution system up to 1000x1000 and larger
- Approved device shall be the Extron PowerCage FOX Rx HDMI SM (70-889-22); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
PowerCage FOX Rx HDMI
HDMI、オーディオおよびRS-232用光ファイバーレシーバー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari