最近閲覧した製品
NAV 10SD 101
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
NAV 10SD 101 (multimode)
- Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
- Decode and scale video and audio
- Provide an HDMI connector for interfacing digital video signal output with embedded audio
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
- LC connector shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide eleven LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- Video LED on front panel to indicate HDMI output signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio output status
- Analog audio LED on front panel to indicate analog audio output status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
- Maintain continuous HDCP-encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMPv3multicast per RFC 3376
- Support RTP transport type per RFC 1889
- Support 802.1x port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support VLAN tagging
- Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
- Support SRTP encryption of AV and data stream
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
- Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV 10SD 101 (60-1572-19; no alternates or equals)
- Decode and scale video and audio
NAV 10SD 101 (multimode)
- Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
- Decode and scale video and audio
- Provide an HDMI connector for interfacing digital video signal output with embedded audio
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
- LC connector shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide eleven LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- Video LED on front panel to indicate HDMI output signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio output status
- Analog audio LED on front panel to indicate analog audio output status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
- Maintain continuous HDCP-encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMPv3multicast per RFC 3376
- Support RTP transport type per RFC 1889
- Support 802.1x port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support VLAN tagging
- Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
- Support SRTP encryption of AV and data stream
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
- Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV 10SD 101 (60-1572-19; no alternates or equals)
- Decode and scale video and audio
NAV 10SD 101 (singlemode)
- Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
- Decode and scale video and audio
- Provide an HDMI connector for interfacing digital video signal output with embedded audio
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
- LC connector shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide eleven LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- Video LED on front panel to indicate HDMI output signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio output status
- Analog audio LED on front panel to indicate analog audio output status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
- Maintain continuous HDCP-encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMPv3multicast per RFC 3376
- Support RTP transport type per RFC 1889
- Support 802.1x port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support VLAN tagging
- Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
- Support SRTP encryption of AV and data stream
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
- Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV 10SD 101 (60-1572-20; no alternates or equals)
- Decode and scale video and audio
NAV 10SD 101 (singlemode)
- Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
- Decode and scale video and audio
- Provide an HDMI connector for interfacing digital video signal output with embedded audio
- Provide connections for interfacing analog audio signals
- One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
- Provide connections for device configuration from a PC or other peripheral
- One USB connection on the front panel
- Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
- Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
- LC connector shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
- Provide one 2-pole captive screw connector for 12VDC power
- Provide eleven LED indicators for status monitoring
- Power LED on front panel to indicate power connection
- Video LED on front panel to indicate HDMI output signal presence
- HDCP LED on front panel to indicate encryption status
- HDMI audio LED on front panel to indicate HDMI audio output status
- Analog audio LED on front panel to indicate analog audio output status
- Two LAN LEDs on front panel to indicate network link/activity status
- Two LAN LEDs on back panel to indicate network link/activity status
- ID LED on front panel for visual confirmation of units on the network
- Reset LED on back panel to indicate reset status
- Provide an ID button on the front panel to identify the unit on the network
- Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
- Support audio streaming between encoder and decoder
- Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
- Maintain continuous HDCP-encryption between the decoder and display
- Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
- Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
- Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
- Support computer video resolutions from 640 x 480 up to 4096 x 2160
- Support HDMI embedded and analog stereo audio
- Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
- Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
- Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
- Support a low delay, encode and decode process
- Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
- Support IGMPv3multicast per RFC 3376
- Support RTP transport type per RFC 1889
- Support 802.1x port-based Network Access Control (PNAC)
- Support audio breakaway
- Support Audio only streaming with a blackburst signal
- Support AES67 audio streaming
- Support VLAN tagging
- Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
- Support SRTP encryption of AV and data stream
- Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
- Support creation of user defined device names
- Support configuration and control from an embedded web browser
- Support optional on-screen messaging for device identification
- Support matrix switching between multiple encoders or decoders
- Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
- Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
- Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
- Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
- Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
- Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
- Approved device shall be the Extron NAV 10SD 101 (60-1572-20; no alternates or equals)
- Decode and scale video and audio
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari