最近閲覧した製品
IPL Pro CR88
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
IPL Pro CR88
- Provide an Ethernet-enabled control processor for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems.
- Ethernet enabled control processor
- Provide eight contact inputs on captive screw connectors located on the back of the processor that can be used to interface with devices such as sensors or switches
- Provide eight configurable low voltage relays on captive screw connectors located on the back of the processor that can be used to control lighting, screen control or other device functions.
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100/1000Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
- Device shall have an optional 12-volt captive screw connection located on the back of the panel should PoE not be available
- Device shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH
- Device shall include a multi-function button that allows for the reset of the device or its communication properties at minimum
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Provide an internal real-time clock with backup battery that is used to keep track of the date and time
- Device shall have at least 512 MB of nonvolatile memory with at least 260 MB available to the user
- Provide front panel LED activity indicators for power status, input status, relay status and network status
- Device shall include an energy-efficient external 12 VDC, 1 A power supply
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Device shall be mountable on a projector mounting pole using an optional mounting kit
- Software requirements
- The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Device drivers and modules can be obtained through Extron support resources and database.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and a TouchLink Pro touchpanel or Network Button Panel
- Device shall support HTTPS and SSH for secure communication between the control processor and Extron Control App
- Device shall support HTTPS for secure communication between the control processor and Extron Control for Web
- Device shall support SSH for secure communication between the control processor and controlled device for programmed systems
- Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- c-UL
- UL
- C-Tick
- FCC Class A
- ICES
- KCC
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL Pro CR88, part number 60-1416-01; no alternates or equals
- Ethernet enabled control processor
IPL Pro CR88
- Provide an Ethernet-enabled control processor for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems.
- Ethernet enabled control processor
- Provide eight contact inputs on captive screw connectors located on the back of the processor that can be used to interface with devices such as sensors or switches
- Provide eight configurable low voltage relays on captive screw connectors located on the back of the processor that can be used to control lighting, screen control or other device functions.
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100/1000Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
- Device shall have an optional 12-volt captive screw connection located on the back of the panel should PoE not be available
- Device shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH
- Device shall include a multi-function button that allows for the reset of the device or its communication properties at minimum
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Provide an internal real-time clock with backup battery that is used to keep track of the date and time
- Device shall have at least 512 MB of nonvolatile memory with at least 260 MB available to the user
- Provide front panel LED activity indicators for power status, input status, relay status and network status
- Device shall include an energy-efficient external 12 VDC, 1 A power supply
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Device shall be mountable on a projector mounting pole using an optional mounting kit
- Software requirements
- The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Device drivers and modules can be obtained through Extron support resources and database.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and a TouchLink Pro touchpanel or Network Button Panel
- Device shall support HTTPS and SSH for secure communication between the control processor and Extron Control App
- Device shall support HTTPS for secure communication between the control processor and Extron Control for Web
- Device shall support SSH for secure communication between the control processor and controlled device for programmed systems
- Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- c-UL
- UL
- C-Tick
- FCC Class A
- ICES
- KCC
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL Pro CR88, part number 60-1416-01; no alternates or equals
- Ethernet enabled control processor
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

IPL Pro CR88
IP Link Proコントロールプロセッサー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。