最近閲覧した製品
IPL EXP RIO8
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
IPL EXP RIO8
- Provide an Ethernet-enabled expansion interface for the purpose of remotely controlling and monitoring connected AV equipment and AV systems.
- Ethernet enabled expansion interface
- Provide eight digital I/O’s on captive screw connectors that can be used to interface with devices such as sensors, switches, LEDs and relays.
- Provide four 12-volt and four 24-volt outputs on captive screw connectors located on the back of the processor that can provide a combined total of 19 watts of power for powering auxiliary devices.
- Provide eight low voltage relays on captive screw connectors located on the back of the expansion interface that can be used to control lighting, screens, or other device functions.
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues as well as supports PoE+, Power over Ethernet, 802.3at
- Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
- Provide front panel LED activity indicators for power status, reset status, digital I/O status, relay status, and network status
- Device shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP/IP, UDP/IP, DHCP, DNS, HTTP (redirect), HTTPS, NTP, SFTP, SNMP, SSH
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Device shall have at least 512 MB of nonvolatile memory
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Device shall be mountable on a projector mounting pole using an optional mounting kit
- Device shall be able UL Listed for use in plenum air handling spaces and meet UL 2043 for heat and smoke release.
- Software requirements
- The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Device drivers and modules can be obtained through Extron support resources and database.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP I/O Series
- Device shall support HTTPS for secure communication between the IPL EXP I/O Series and the embedded web pages
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- c-UL
- UL
- C-Tick
- FCC Class A
- ICES
- KCC
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL EXP RIO8, part number 60-1907-01, no alternates or equals
- Ethernet enabled expansion interface
IPL EXP RIO8
- Provide an Ethernet-enabled expansion interface for the purpose of remotely controlling and monitoring connected AV equipment and AV systems.
- Ethernet enabled expansion interface
- Provide eight digital I/O’s on captive screw connectors that can be used to interface with devices such as sensors, switches, LEDs and relays.
- Provide four 12-volt and four 24-volt outputs on captive screw connectors located on the back of the processor that can provide a combined total of 19 watts of power for powering auxiliary devices.
- Provide eight low voltage relays on captive screw connectors located on the back of the expansion interface that can be used to control lighting, screens, or other device functions.
- Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues as well as supports PoE+, Power over Ethernet, 802.3at
- Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
- Provide front panel LED activity indicators for power status, reset status, digital I/O status, relay status, and network status
- Device shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP/IP, UDP/IP, DHCP, DNS, HTTP (redirect), HTTPS, NTP, SFTP, SNMP, SSH
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
- Device shall have at least 512 MB of nonvolatile memory
- Mounting requirements
- Device shall be housed in a 1 RU, quarter rack width metal enclosure
- Device shall be rack mountable using an optional rack shelf
- Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
- Device shall be mountable on a projector mounting pole using an optional mounting kit
- Device shall be able UL Listed for use in plenum air handling spaces and meet UL 2043 for heat and smoke release.
- Software requirements
- The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
- Device drivers and modules can be obtained through Extron support resources and database.
- Shall be configured or programmed by an Extron authorized user.
- The device’s configuration and settings shall be managed using Extron’s Toolbelt software
- Security Requirements
- Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP I/O Series
- Device shall support HTTPS for secure communication between the IPL EXP I/O Series and the embedded web pages
- Device shall provide the option to modify administrator and user credentials
- Device shall support security updates to maintain network health
- Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
- Device shall support the installation of an owner furnished certificate with the following properties:
- Certificates shall include x.509 support
- Certificates shall include public / private key exchange
- Certificates shall support PEM encoding
- Extron shall furnish documentation that describes all supported network ports and services
- Shall meet regulatory compliances
- CE
- c-UL
- UL
- C-Tick
- FCC Class A
- ICES
- KCC
- VCCI
- RoHs
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron IPL EXP RIO8, part number 60-1907-01, no alternates or equals
- Ethernet enabled expansion interface
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

IPL EXP RIO8
コントロールシステムI/O拡張インターフェイス
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。