IPL 250

IPL 250

1. Provide an Ethernet enabled control processor for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems.
   1. Configuration-based, Ethernet enabled control processor
      1. Provide three bidirectional configurable RS-232 ports on captive screw connectors located on the back of the processor that can be configured for control of AV system components
      2. Provide four IR ports on captive screw connectors located on the back of the processor. These ports shall allow the transmission of IR signals (using an IR emitter) for control of AV system components
      3. Provide four configurable low voltage relays on captive screw connectors located on the back of the processor that can be configured to control lighting, screen control or other device functions.
      4. Provide four contact closure input ports on captive a screw connector located on the back of the processor that can be used to interface with devices such as sensors, switches, and relays.
      5. Supports the creation of IR drivers by capturing IR commands from handheld remotes. IR receiver shall be located on the bottom right front of the processor and integrated into the control processor enclosure.
      6. Device shall have a female RJ-45 jack located on the back of the enclosure that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues
      7. Device shall support the following protocols: ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
      8. Device shall include a multi-function button that allows for the reset of the device or its communication properties at minimum
      9. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
      10. Provide an internal real-time clock with a 30 years backup battery that is used to keep track of the date and time
      11. Provide an integrated high performance Web server that supports up to 200 simultaneous sessions and has at least 7.25 MB nonvolatile user memory
      12. Provide front panel led activity indicators for power status, RS-232 status, IR status, contact input status, relay status, and network status
      13. Device shall include an energy-efficient external 12 VDC, 1 A power supply
   2. Mounting requirements
      1. Device shall be housed in a 1 RU, quarter EIA rack width metal enclosure
      2. Device shall be able to be rack mounted using an optional rack shelf
      3. Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
      4. Device shall be able to be mounted on a projector mounting pole using an optional mounting kit
   3. Software requirements
      1. Device shall be configured using Global Configurator 3.x with support for the following:
         1. Provide support for four configurable TouchLink Touch panels
         2. Provide remote monitoring and control via Ethernet
         3. Provide the ability to create E-mail notifications
         4. Provide multiple levels of password protection
         5. Provide the ability to create schedules and monitors
         6. Supports up to six Ethernet-controllable AV devices
   4. Shall meet regulatory compliances
      1. CE
      2. UL
      3. c-UL
      4. C-tick
      5. FCC Class A
      6. ICES
      7. VCCI
      8. RoHS
      9. WEEE
      10. KC mark
   5. Product Warranty
      1. Shall provide at least 3 years parts and labor
   6. Approved device shall be the Extron IPL 250, part number 60-1026-81; no alternates or equals