IPCP Pro PCS1

IPCP Pro PCS1

1. Provide an Ethernet-enabled control processor for the purpose of remotely controlling, monitoring and troubleshooting connected AV equipment and AV systems.
   1. Ethernet-enabled control processor
      1. Provide one IEC-320-C14 male power connector on a six-inch cable directly hardwired to the back of the processor that supports 100-240 VAC, 10 Amps, 50/60 Hz power that serves as an input as well as provides power to the control processor via an internal universal AC power supply
      2. Provide one IEC-320-C13 female power connector on a six-inch cable directly hardwired to the back of the processor that supports 100-240 VAC, 10 Amps, 50/60 Hz power that is designated as an output that can be used to remotely control and monitor both the power status and power consumption of an AV system component
      3. Provide one RS-232 port on a captive screw connector located on the back of the processor that can be used for unidirectional or bidirectional control of an AV system component
      4. Provide three digital I/O’s on captive screw connectors that can be used to interface with devices such as sensors, switches, LEDs and relays
      5. Provide one IR/Serial port on a captive screw connector located on the back of the processor. This port shall allow the transmission of IR signals (using an IR emitter) or unidirectional RS-232 communications for control of AV system components
      6. Provide one eBUS® port on a 4-pole captive screw connector located on the back of the control processor for connecting to eBUS devices
      7. Provide one female RJ-45 jack located on the back of the enclosure that supports 10/100/1000Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues
      8. Provide a multi-function button located on the front of the control processor that allows for the reset of the device or its communication properties at minimum
      9. Provide a single power button located on the front of the control processor that can be used to toggle the output power on and off
         1. Power button can be disabled via a Front Panel Lockout feature that can be activated in the software.
      10. Provide a 10-amp circuit breaker located on the front of the control processor allowing for over-current protection for remotely controlled connected devices
      11. Provide front panel LED activity indicators for device power status, output power status, eBUS status, RS-232 status, digital I/O status, IR/S status, and network status
      12. Provide an internal real-time clock with backup battery that is used to keep track of the date and time
      13. Device shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH
      14. Device shall support a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
      15. Device shall have at least 4.5 GB of nonvolatile memory with at least 4.2 GB available to the user
      16. Device shall include an Extron LinkLicense® for User Interfaces
   2. Mounting requirements
      1. Device shall be housed in a 1 RU, quarter rack width metal enclosure
      2. Device shall be able to be rack mounted using an optional rack shelf
      3. Device shall be able to be installed under a table, desk, or other flat surface using an optional mounting kit
      4. Device shall be mountable on a projector mounting pole using an optional mounting kit
   3. Software requirements
      1. The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.
      2. Device drivers and modules can be obtained through Extron support resources and database.
      3. Shall be configured or programmed by an Extron authorized user.
      4. The device's configuration and settings shall be managed using Extron's Toolbelt software
   4. Security Requirements
      1. Device shall support SFTP and SSH for secure communication between the control processor and a TouchLink Pro touchpanel or Network Button Panel
      2. Device shall support HTTPS and SSH for secure communication between the control processor and Extron Control App
      3. Device shall support HTTPS for secure communication between the control processor and Extron Control for Web
      4. Device shall support SSH for secure communication between the control processor and controlled device for configured and programmed systems
      5. Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software
      6. Device shall provide the option to modify administrator and user credentials
      7. Device shall support security updates to maintain network health
      8. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
      9. Device shall support the installation of an owner furnished certificate with the following properties:
         1. Certificates shall include x.509 support
         2. Certificates shall include public / private key exchange
         3. Certificates shall support PEM encoding
      10. Extron shall furnish documentation that describes all supported network ports and services
   5. Shall meet regulatory compliances
      1. CE
      2. c-UL
      3. UL
      4. C-Tick
      5. FCC Class A
      6. ICES
      7. KCC
      8. VCCI
      9. RoHS
      10. WEEE
   6. Product Warranty
      1. Shall provide at least 3 years parts and labor
   7. Approved device shall be the Extron IPCP Pro PCS1, part number 60-1618-01A; no alternates or equals