最近閲覧した製品
IN1604
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
IN1604 DTP
- Provide a video scaling presentation switcher that shall support up to four inputs and one output for processing and switching of HDMI, HDTV, RGB, and composite video sources, with additional support for signal extension over shielded CATx cable.
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio, plus signal extension over shielded CATx cable
- Video Input Requirements
- Provide video input connections
- Three HDMI
- One 15-pin HD, configurable for RGB, component video, S-video, or composite video
- Provide automatic detection of input video parameters
- Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
- The user may selectively enable to disable automatic detection for each input
- Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
- Provide storage and recall of video parameters and picture settings
- Automatic memories for each video input
- Save video settings and picture adjustments without user intervention
- Automatically recall settings when the same video rate is encountered
- The user may selectively enable or disable automatic memories
- Manual user presets
- Save picture adjustments
- User presets may be saved and recalled using front panel controls
- User presets may be saved and recalled electronically via RS-232 or USB connection
- Manual input presets
- Save video settings and picture adjustments
- Input presets may be saved and recalled electronically via RS-232 or USB connection
- Automatic memories for each video input
- Provide enhanced decoding of composite video
- Decoder shall include a temporal, 3D adaptive comb filter
- Support NTSC 3.58, NTSC 4.42, PAL, and SECAM formats
- Support HDMI specifications including 1080p/60 Deep Color, data rates up to 6.75 Gbps, and HD lossless audio formats
- Provide automatic 3:2 and 2:2 pulldown detection
- Provide equalization for incoming HDMI signals
- Provide video input connections
- Video Output Requirements
- Provide video output connection
- One RJ-45 for HDMI or DVI to an Extron DTP® 230 or DTP 330 twisted pair receiver
- Shall be configurable for compatibility with an Extron DTP HDMI 230, DTP HDMI 330, DTP DVI 230, or DTP DVI 330 receiver
- Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display
- One RJ-45 for HDMI or DVI to an Extron DTP® 230 or DTP 330 twisted pair receiver
- Provide a range of selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2048x1080p/60
- Provide image scaling and video format conversion at 30-bit precision and support motion adaptive 1080i deinterlacing
- Provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Provide internal test patterns for calibration and setup
- Support image freeze via RS-232 or USB connection
- Support automatic muting of video and sync output when no video input signal is present
- Provide a choice to generate a blue screen or a black screen before disabling sync
- Provide a configurable timeout period before disabling sync
- The user may selectively enable or disable automatic muting of sync output
- Provide a low power standby state selectable via RS-232 or USB
- Support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Support video transmission over shielded CATx up to 330 feet (100 meters)
- Provide video output connection
- Switching Requirements
- Provide automatic switching between input sources
- Automatically switch to the active input
- Provide a configurable switching priority when multiple inputs are active
- High to low: highest numbered input has priority
- Low to high: lowest numbered input has priority
- Provide selectable transition effects when switching inputs
- Cut: video output shall cut to black, then cut to the newly selected input source
- Fade: video output shall fade to black, then fade into the newly selected input source
- Accompanying audio shall ramp down, then ramp up to match the transition effect
- Provide automatic switching between input sources
- EDID Requirements
- Provide automatic EDID management between connected devices
- Provide a set of pre-stored EDID files
- Support capture of EDID from any connected display
- Support user uploading of custom-generated EDID files
- Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Provide automatic EDID management between connected devices
- HDCP Requirements
- The unit shall be HDCP compliant
- Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
- Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When disabled, the output shall be muted
- Provide real-time verification of HDCP status for each HDMI input and output
- Directly readable on front panel LEDs
- Electronically accessible over RS-232 or USB connection
- The unit shall be HDCP compliant
- Audio Requirements
- Provide audio input connections
- Three HDMI, embedded
- One 5-pole captive screw, balanced/unbalanced line level analog stereo
- One 3.5 mm stereo mini jack, unbalanced analog stereo
- Provide audio output connections
- One 5-pole captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- One RJ-45, DTP HDMI embedded with output level control for two-channel PCM, and analog audio with output level control
- Support embedding of the analog audio input signal on the DTP output
- Support extraction of two-channel PCM HDMI audio signals to the analog stereo output, or pass bitstream audio to the DTP output
- Provide the capability for all four video inputs to share a common analog audio input
- Provide a delay in the audio output to match the corresponding video processing delay
- Provide gain and attenuation adjustments for analog input audio
- Support individual muting of the analog stereo or HDMI audio inputs
- Support audio transmission over shielded CATx up to 330 feet (100 meters)
- Provide audio input connections
- Control/Remote – RS-232 and IR Pass-Through Over Shielded CATx Requirements
- Provide connection for AV device control
- 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair receiver
- Support RS-232 and IR transmission over shielded CATx up to 330 feet (100 meters)
- Provide connection for AV device control
- Control/Remote – Scaler Control Requirements
- Provide connections for remote scaler control
- 5-pole captive screw: RS-232
- 5-pole captive screw: contact closure
- 5-pole captive screw: tally output
- Mini USB-B: USB 2.0
- Provide alternatives for configuration and operation
- On-screen menus navigated using front panel controls
- Product configuration software connected via USB
- Serial commands sent over RS-232 or USB connection
- Tally output shall provide +5 VDC to light an LED indicating the currently selected input
- Shall provide for the muting of video and/or audio signals via contact closure or RS-232 control
- Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Provide connections for remote scaler control
- General Requirements
- Provide real-time verification of signal flow and operation from DTP receiver
- Directly readable on RJ-45 signal and link LEDs
- Shall be compatible with all Extron DTP 230 Series receivers, DTP 330 Series receivers, and DTP-enabled products
- Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
- Shall provide remote power to remote DTP receiver over the shielded CATx connection
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Provide real-time verification of signal flow and operation from DTP receiver
- Video Input Requirements
- Approved device shall be the Extron IN1604 DTP (part number 60-1457-01); no alternates or equals
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio, plus signal extension over shielded CATx cable
IN1604 DTP
- Provide a video scaling presentation switcher that shall support up to four inputs and one output for processing and switching of HDMI, HDTV, RGB, and composite video sources, with additional support for signal extension over shielded CATx cable.
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio, plus signal extension over shielded CATx cable
- Video Input Requirements
- Provide video input connections
- Three HDMI
- One 15-pin HD, configurable for RGB, component video, S-video, or composite video
- Provide automatic detection of input video parameters
- Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
- The user may selectively enable to disable automatic detection for each input
- Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
- Provide storage and recall of video parameters and picture settings
- Automatic memories for each video input
- Save video settings and picture adjustments without user intervention
- Automatically recall settings when the same video rate is encountered
- The user may selectively enable or disable automatic memories
- Manual user presets
- Save picture adjustments
- User presets may be saved and recalled using front panel controls
- User presets may be saved and recalled electronically via RS-232 or USB connection
- Manual input presets
- Save video settings and picture adjustments
- Input presets may be saved and recalled electronically via RS-232 or USB connection
- Automatic memories for each video input
- Provide enhanced decoding of composite video
- Decoder shall include a temporal, 3D adaptive comb filter
- Support NTSC 3.58, NTSC 4.42, PAL, and SECAM formats
- Support HDMI specifications including 1080p/60 Deep Color, data rates up to 6.75 Gbps, and HD lossless audio formats
- Provide automatic 3:2 and 2:2 pulldown detection
- Provide equalization for incoming HDMI signals
- Provide video input connections
- Video Output Requirements
- Provide video output connection
- One RJ-45 for HDMI or DVI to an Extron DTP® 230 or DTP 330 twisted pair receiver
- Shall be configurable for compatibility with an Extron DTP HDMI 230, DTP HDMI 330, DTP DVI 230, or DTP DVI 330 receiver
- Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display
- One RJ-45 for HDMI or DVI to an Extron DTP® 230 or DTP 330 twisted pair receiver
- Provide a range of selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2048x1080p/60
- Provide image scaling and video format conversion at 30-bit precision and support motion adaptive 1080i deinterlacing
- Provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Provide internal test patterns for calibration and setup
- Support image freeze via RS-232 or USB connection
- Support automatic muting of video and sync output when no video input signal is present
- Provide a choice to generate a blue screen or a black screen before disabling sync
- Provide a configurable timeout period before disabling sync
- The user may selectively enable or disable automatic muting of sync output
- Provide a low power standby state selectable via RS-232 or USB
- Support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Support video transmission over shielded CATx up to 330 feet (100 meters)
- Provide video output connection
- Switching Requirements
- Provide automatic switching between input sources
- Automatically switch to the active input
- Provide a configurable switching priority when multiple inputs are active
- High to low: highest numbered input has priority
- Low to high: lowest numbered input has priority
- Provide selectable transition effects when switching inputs
- Cut: video output shall cut to black, then cut to the newly selected input source
- Fade: video output shall fade to black, then fade into the newly selected input source
- Accompanying audio shall ramp down, then ramp up to match the transition effect
- Provide automatic switching between input sources
- EDID Requirements
- Provide automatic EDID management between connected devices
- Provide a set of pre-stored EDID files
- Support capture of EDID from any connected display
- Support user uploading of custom-generated EDID files
- Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Provide automatic EDID management between connected devices
- HDCP Requirements
- The unit shall be HDCP compliant
- Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
- Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When disabled, the output shall be muted
- Provide real-time verification of HDCP status for each HDMI input and output
- Directly readable on front panel LEDs
- Electronically accessible over RS-232 or USB connection
- The unit shall be HDCP compliant
- Audio Requirements
- Provide audio input connections
- Three HDMI, embedded
- One 5-pole captive screw, balanced/unbalanced line level analog stereo
- One 3.5 mm stereo mini jack, unbalanced analog stereo
- Provide audio output connections
- One 5-pole captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- One RJ-45, DTP HDMI embedded with output level control for two-channel PCM, and analog audio with output level control
- Support embedding of the analog audio input signal on the DTP output
- Support extraction of two-channel PCM HDMI audio signals to the analog stereo output, or pass bitstream audio to the DTP output
- Provide the capability for all four video inputs to share a common analog audio input
- Provide a delay in the audio output to match the corresponding video processing delay
- Provide gain and attenuation adjustments for analog input audio
- Support individual muting of the analog stereo or HDMI audio inputs
- Support audio transmission over shielded CATx up to 330 feet (100 meters)
- Provide audio input connections
- Control/Remote – RS-232 and IR Pass-Through Over Shielded CATx Requirements
- Provide connection for AV device control
- 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair receiver
- Support RS-232 and IR transmission over shielded CATx up to 330 feet (100 meters)
- Provide connection for AV device control
- Control/Remote – Scaler Control Requirements
- Provide connections for remote scaler control
- 5-pole captive screw: RS-232
- 5-pole captive screw: contact closure
- 5-pole captive screw: tally output
- Mini USB-B: USB 2.0
- Provide alternatives for configuration and operation
- On-screen menus navigated using front panel controls
- Product configuration software connected via USB
- Serial commands sent over RS-232 or USB connection
- Tally output shall provide +5 VDC to light an LED indicating the currently selected input
- Shall provide for the muting of video and/or audio signals via contact closure or RS-232 control
- Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Provide connections for remote scaler control
- General Requirements
- Provide real-time verification of signal flow and operation from DTP receiver
- Directly readable on RJ-45 signal and link LEDs
- Shall be compatible with all Extron DTP 230 Series receivers, DTP 330 Series receivers, and DTP-enabled products
- Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
- Shall provide remote power to remote DTP receiver over the shielded CATx connection
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Provide real-time verification of signal flow and operation from DTP receiver
- Video Input Requirements
- Approved device shall be the Extron IN1604 DTP (part number 60-1457-01); no alternates or equals
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio, plus signal extension over shielded CATx cable
IN1604 HD
- Provide a video scaling presentation switcher that shall support up to four inputs and one output for processing and switching of HDMI, HDTV, RGB, and composite video sources.
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio
- Video Input Requirements
- Provide video input connections
- Three HDMI
- One 15-pin HD, configurable for RGB, component video, S-video, or composite video
- Provide automatic detection of input video parameters
- Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
- The user may selectively enable to disable automatic detection for each input
- Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
- Provide storage and recall of video parameters and picture settings
- Automatic memories for each video input
- Save video settings and picture adjustments without user intervention
- Automatically recall settings when the same video rate is encountered
- The user may selectively enable or disable automatic memories
- Manual user presets
- Save picture adjustments
- User presets may be saved and recalled using front panel controls
- User presets may be saved and recalled electronically via RS-232 or USB connection
- Manual input presets
- Save video settings and picture adjustments
- Input presets may be saved and recalled electronically via RS-232 or USB connection
- Automatic memories for each video input
- Provide enhanced decoding of composite video
- Decoder shall include a temporal, 3D adaptive comb filter
- Support NTSC 3.58, NTSC 4.42, PAL, and SECAM formats
- Support HDMI specifications including 1080p/60 Deep Color, data rates up to 6.75 Gbps, and HD lossless audio formats
- Provide automatic 3:2 and 2:2 pulldown detection
- Provide equalization for incoming HDMI signals
- Provide video input connections
- Video Output Requirements
- Provide video output connection
- One HDMI
- Provide a range of selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2048x1080p/60
- Provide image scaling and video format conversion at 30-bit precision and support motion adaptive 1080i deinterlacing
- Provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Provide internal test patterns for calibration and setup
- Support image freeze via RS-232 or USB connection
- Support automatic muting of video and sync output when no video input signal is present
- Provide a choice to generate a blue screen or a black screen before disabling sync
- Provide a configurable timeout period before disabling sync
- The user may selectively enable or disable automatic muting of sync output
- Provide a low power standby state selectable via RS-232 or USB
- Support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Provide video output connection
- Switching Requirements
- Provide automatic switching between input sources
- Automatically switch to the active input
- Provide a configurable switching priority when multiple inputs are active
- High to low: highest numbered input has priority
- Low to high: lowest numbered input has priority
- Provide selectable transition effects when switching inputs
- Cut: video output shall cut to black, then cut to the newly selected input source
- Fade: video output shall fade to black, then fade into the newly selected input source
- Accompanying audio shall ramp down, then ramp up to match the transition effect
- Provide automatic switching between input sources
- EDID Requirements
- Provide automatic EDID management between connected devices
- Provide a set of pre-stored EDID files
- Support capture of EDID from any connected display
- Support user uploading of custom-generated EDID files
- Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Provide automatic EDID management between connected devices
- HDCP Requirements
- The unit shall be HDCP compliant
- Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
- Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When disabled, the output shall be muted
- Provide real-time verification of HDCP status for each HDMI input and output
- Directly readable on front panel LEDs
- Electronically accessible over RS-232 or USB connection
- The unit shall be HDCP compliant
- Audio Requirements
- Provide audio input connections
- Three HDMI, embedded
- One 5-pole captive screw, balanced/unbalanced line level analog stereo
- One 3.5 mm stereo mini jack, unbalanced analog stereo
- Provide audio output connections
- One 5-pole captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- One HDMI, embedded and with output level control for two-channel PCM
- Support embedding of the analog audio input signal on the HDMI output
- Support extraction of two-channel PCM HDMI audio signals to the analog stereo output, or pass bitstream audio to the HDMI output
- Provide the capability of all four video inputs to share a common analog audio input
- Provide a delay in the audio output to match the corresponding video processing delay
- Provide gain and attenuation adjustments for analog input audio
- Support individual muting of the analog stereo or HDMI audio inputs
- Provide audio input connections
- Control Requirements
- Provide control connections
- 5-pole captive screw: RS-232
- 5-pole captive screw: contact closure
- 5-pole captive screw: tally output
- Mini USB-B: USB 2.0
- Provide alternatives for configuration and operation
- On-screen menus navigated using front panel controls
- Product configuration software connected via USB
- Serial commands sent over RS-232 or USB connection
- Tally output shall provide +5 VDC to light an LED indicating the currently selected input
- Shall provide for the muting of video and/or audio signals via contact closure or RS-232 control
- Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Provide control connections
- General Requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Video Input Requirements
- Approved device shall be the Extron IN1604 HD (part number 60-1457-02); no alternates or equals
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio
IN1604 HD
- Provide a video scaling presentation switcher that shall support up to four inputs and one output for processing and switching of HDMI, HDTV, RGB, and composite video sources.
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio
- Video Input Requirements
- Provide video input connections
- Three HDMI
- One 15-pin HD, configurable for RGB, component video, S-video, or composite video
- Provide automatic detection of input video parameters
- Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
- The user may selectively enable to disable automatic detection for each input
- Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
- Provide storage and recall of video parameters and picture settings
- Automatic memories for each video input
- Save video settings and picture adjustments without user intervention
- Automatically recall settings when the same video rate is encountered
- The user may selectively enable or disable automatic memories
- Manual user presets
- Save picture adjustments
- User presets may be saved and recalled using front panel controls
- User presets may be saved and recalled electronically via RS-232 or USB connection
- Manual input presets
- Save video settings and picture adjustments
- Input presets may be saved and recalled electronically via RS-232 or USB connection
- Automatic memories for each video input
- Provide enhanced decoding of composite video
- Decoder shall include a temporal, 3D adaptive comb filter
- Support NTSC 3.58, NTSC 4.42, PAL, and SECAM formats
- Support HDMI specifications including 1080p/60 Deep Color, data rates up to 6.75 Gbps, and HD lossless audio formats
- Provide automatic 3:2 and 2:2 pulldown detection
- Provide equalization for incoming HDMI signals
- Provide video input connections
- Video Output Requirements
- Provide video output connection
- One HDMI
- Provide a range of selectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2048x1080p/60
- Provide image scaling and video format conversion at 30-bit precision and support motion adaptive 1080i deinterlacing
- Provide aspect ratio control
- When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
- When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
- Provide internal test patterns for calibration and setup
- Support image freeze via RS-232 or USB connection
- Support automatic muting of video and sync output when no video input signal is present
- Provide a choice to generate a blue screen or a black screen before disabling sync
- Provide a configurable timeout period before disabling sync
- The user may selectively enable or disable automatic muting of sync output
- Provide a low power standby state selectable via RS-232 or USB
- Support the connection of DVI displays that do not recognize HDMI-specific formats
- Automatically enable or disable embedded TMDS audio and InfoFrames
- Automatically set the correct color space
- Provide video output connection
- Switching Requirements
- Provide automatic switching between input sources
- Automatically switch to the active input
- Provide a configurable switching priority when multiple inputs are active
- High to low: highest numbered input has priority
- Low to high: lowest numbered input has priority
- Provide selectable transition effects when switching inputs
- Cut: video output shall cut to black, then cut to the newly selected input source
- Fade: video output shall fade to black, then fade into the newly selected input source
- Accompanying audio shall ramp down, then ramp up to match the transition effect
- Provide automatic switching between input sources
- EDID Requirements
- Provide automatic EDID management between connected devices
- Provide a set of pre-stored EDID files
- Support capture of EDID from any connected display
- Support user uploading of custom-generated EDID files
- Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
- Provide automatic EDID management between connected devices
- HDCP Requirements
- The unit shall be HDCP compliant
- Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
- Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
- Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
- Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
- When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
- When disabled, the output shall be muted
- Provide real-time verification of HDCP status for each HDMI input and output
- Directly readable on front panel LEDs
- Electronically accessible over RS-232 or USB connection
- The unit shall be HDCP compliant
- Audio Requirements
- Provide audio input connections
- Three HDMI, embedded
- One 5-pole captive screw, balanced/unbalanced line level analog stereo
- One 3.5 mm stereo mini jack, unbalanced analog stereo
- Provide audio output connections
- One 5-pole captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
- One HDMI, embedded and with output level control for two-channel PCM
- Support embedding of the analog audio input signal on the HDMI output
- Support extraction of two-channel PCM HDMI audio signals to the analog stereo output, or pass bitstream audio to the HDMI output
- Provide the capability of all four video inputs to share a common analog audio input
- Provide a delay in the audio output to match the corresponding video processing delay
- Provide gain and attenuation adjustments for analog input audio
- Support individual muting of the analog stereo or HDMI audio inputs
- Provide audio input connections
- Control Requirements
- Provide control connections
- 5-pole captive screw: RS-232
- 5-pole captive screw: contact closure
- 5-pole captive screw: tally output
- Mini USB-B: USB 2.0
- Provide alternatives for configuration and operation
- On-screen menus navigated using front panel controls
- Product configuration software connected via USB
- Serial commands sent over RS-232 or USB connection
- Tally output shall provide +5 VDC to light an LED indicating the currently selected input
- Shall provide for the muting of video and/or audio signals via contact closure or RS-232 control
- Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
- Provide control connections
- General Requirements
- Enclosure shall be rack-mountable, half rack width, and 1RU in height
- Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
- Shall meet regulatory compliances
- Shall meet safety compliances under CE, c-UL, and UL
- Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
- Shall comply with appropriate requirements of RoHS and WEEE
- Shall provide three year parts and labor warranty
- Video Input Requirements
- Approved device shall be the Extron IN1604 HD (part number 60-1457-02); no alternates or equals
- Rack-mountable scaler and switcher for HDMI, HDTV, RGB, and composite video sources and associated digital and analog audio
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
IN1604
HDCP準拠4入力スケーラー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari