最近閲覧した製品
FOX Matrix 7200
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました！
エラーが発生しました。しばらくしてからもう一度お試しください。
FOX Matrix 7200
- Shall provide a configurable matrix switcher that shall support analog and digital video, audio, and control signals with up to 72 inputs and 72 outputs for transmission and routing over fiber optic cabling
- Rack mountable configurable matrix switcher for routing video, audio, and control over fiber optic cabling
- Configuration requirements
- Shall provide a modular, hot swappable I/O board design
- Shall provide nine (9) configurable matrix board slots for I/O matrix boards
- Shall be configurable with I/O sizes from 8x8 up to 72x72 in 8x8 increments
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall support field configuration of each board slot
- Input and output requirements
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall support matrix boards with multimode fiber optic input and output connections
- Selectable input and output reclocking
- Status LED indicators for fiber link and reclocking status
- Compatible with Extron FOX and FOX II Series MM extenders
- Shall support matrix boards with singlemode fiber optic input and output connections
- Selectable input and output reclocking
- Status LED indicators for fiber link and reclocking status
- Compatible with Extron FOX and FOX II Series SM extenders
- Shall provide (2) female BNC connectors for bi-level and tri-level sync signals to genlock video signals
- Available for 3G-SDI, HD-SDI, and SDI input and output signals via a matrix board with direct device connections only
- Shall support matrix boards with direct connection of 3G-SDI, HD-SDI, and SDI input and output devices
- 3G-SDI, HD-SDI, and SDI signals up to 2.97 Gbps
- Video genlock with separate bi-level and tri-level references for correct vertical interval switch timing
- Compliant with SMPTE 259M, 292M, 424M, and ITU digital video standards
- Immunity to pathological signal patterns defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI and SDI
- Shall support matrix boards with fiber optic connection of 3G-SDI, HD-SDI, and SDI input and output signals with immunity to pathological signal patterns
- 3G-SDI, HD-SDI, and SDI signals up to 2.97 Gbps
- Compliant with SMPTE 424M, 297-2006, 259M, 292M, and ITU digital video standards
- Immunity to pathological signal patterns defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI and SDI
- Signal switching requirements
- Shall provide all-digital switching of keyboard, video, and mouse – KVM signals
- Shall provide all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Compatible with Extron FOX and FOX II Series extenders
- Shall support a mix of digital and analog video source signal types
- Shall be configurable for use with sources and displays supporting resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10-bit color depth
- Supports 4K up to 30 Hz with 8 bits per color over one connection
- Supports 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Supports 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Supports 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall support all-digital switching of USB signals
- Compatible with Extron FOX Series USB extenders
- Transmission requirements
- Shall support a maximum signal transmission distance of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall support a maximum signal transmission distance of 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Control requirements
- Shall support multiple methods for control, configuration, I/O selection, and general operation
- Front panel
- Ethernet control
- RS-232 control
- Shall provide one (1) bidirectional RS-232 serial port on the front panel for setup and configuration
- Shall provide a recessed Reset button on the rear panel
- Shall provide front panel controller with tri-color backlit buttons for functional control of the matrix switcher
- Provide a discrete button for each input and output
- Provide four (4) control buttons labeled ENTER, PRESET, VIEW, and ESC
- Enable custom labeling for input and output buttons
- Buttons shall illuminate red, green, or amber, depending on function
- Shall provide front panel security lockout to prevent unauthorized use in non-secure environments
- Shall provide one (1) RJ-45 connector on the rear panel for setup, configuration, and control via an Ethernet connection
- Shall support Ethernet monitoring and control using standard TCP/IP protocols
- Proactive monitoring and system management over a LAN, WAN, or the Internet
- Advanced computer-aided diagnostics
- Firmware updates
- Functional control of the matrix switcher
- Shall support SNMP for remote monitoring
- Shall provide one (1) bidirectional RS-232/RS-422 connector on the rear panel for control and firmware updates
- Shall provide Extron control software to enable control and configuration from a Windows®-based computer via the serial or Ethernet port
- Shall include advanced self-diagnostics of I/O boards, primary and redundant power supply voltages, fiber links, and overall matrix functionality
- Shall support alarm notification to an external control system in case of fiber link loss
- Shall provide I/O port activity status via the rear panel, RS-232 or RS-422 port, or Ethernet
- Shall provide I/O activity viewable within internal Web pages that are easily obtainable by AV control systems
- Shall support multiple methods for control, configuration, I/O selection, and general operation
- Secure switching requirements
- Shall support secure partitioning into smaller sub-switchers to segregate sources and destinations in a secure environment
- Enable up to twelve (12) partitions
- Inputs can only be tied to outputs within the same partition
- Shall provide priority switching to prevent unauthorized access to sensitive date in a secure environment
- Each input and output is assigned a security level from one (1) to six (6) with level one (1) as the lowest level and level six (6) as the highest
- An input can only be tied to an output that is at the same level or higher
- Shall support secure partitioning into smaller sub-switchers to segregate sources and destinations in a secure environment
- Functional requirements
- Shall provide commands or control sequences for functional operation of the matrix switcher
- Create or remove ties within the matrix
- Group inputs and outputs
- Save or recall presets
- Mute or unmute outputs
- Shall provide 64 memory presets for saving and recalling commonly used I/O ties
- Shall provide rooming capability to create 10 rooms by groups of outputs, each with separate presets
- Shall provide commands or control sequences for functional operation of the matrix switcher
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- Power requirements
- Shall provide dual redundant power supplies
- Shall support hot-swappable power supply replacement
- Shall provide two (2) AC power inputs for continuous connection to primary and secondary power sources
- General requirements
- Shall be a 8U high, full rack width metal enclosure
- Shall be rack mountable with integrated brackets
- Shall provide two (2) internal, hot-swappable fans
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall be compatible with Extron FOX Series products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series products for AV signal distribution and routing over fiber optic cabling
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron FOX Matrix 7200 (60-1256-01); no alternates or equals
FOX Matrix 7200
- Shall provide a configurable matrix switcher that shall support analog and digital video, audio, and control signals with up to 72 inputs and 72 outputs for transmission and routing over fiber optic cabling
- Rack mountable configurable matrix switcher for routing video, audio, and control over fiber optic cabling
- Configuration requirements
- Shall provide a modular, hot swappable I/O board design
- Shall provide nine (9) configurable matrix board slots for I/O matrix boards
- Shall be configurable with I/O sizes from 8x8 up to 72x72 in 8x8 increments
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall support field configuration of each board slot
- Input and output requirements
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall support matrix boards with multimode fiber optic input and output connections
- Selectable input and output reclocking
- Status LED indicators for fiber link and reclocking status
- Compatible with Extron FOX and FOX II Series MM extenders
- Shall support matrix boards with singlemode fiber optic input and output connections
- Selectable input and output reclocking
- Status LED indicators for fiber link and reclocking status
- Compatible with Extron FOX and FOX II Series SM extenders
- Shall provide (2) female BNC connectors for bi-level and tri-level sync signals to genlock video signals
- Available for 3G-SDI, HD-SDI, and SDI input and output signals via a matrix board with direct device connections only
- Shall support matrix boards with direct connection of 3G-SDI, HD-SDI, and SDI input and output devices
- 3G-SDI, HD-SDI, and SDI signals up to 2.97 Gbps
- Video genlock with separate bi-level and tri-level references for correct vertical interval switch timing
- Compliant with SMPTE 259M, 292M, 424M, and ITU digital video standards
- Immunity to pathological signal patterns defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI and SDI
- Shall support matrix boards with fiber optic connection of 3G-SDI, HD-SDI, and SDI input and output signals with immunity to pathological signal patterns
- 3G-SDI, HD-SDI, and SDI signals up to 2.97 Gbps
- Compliant with SMPTE 424M, 297-2006, 259M, 292M, and ITU digital video standards
- Immunity to pathological signal patterns defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI and SDI
- Signal switching requirements
- Shall provide all-digital switching of keyboard, video, and mouse – KVM signals
- Shall provide all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Compatible with Extron FOX and FOX II Series extenders
- Shall support a mix of digital and analog video source signal types
- Shall be configurable for use with sources and displays supporting resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10-bit color depth
- Supports 4K up to 30 Hz with 8 bits per color over one connection
- Supports 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Supports 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Supports 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall support all-digital switching of USB signals
- Compatible with Extron FOX Series USB extenders
- Transmission requirements
- Shall support a maximum signal transmission distance of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall support a maximum signal transmission distance of 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Control requirements
- Shall support multiple methods for control, configuration, I/O selection, and general operation
- Front panel
- Ethernet control
- RS-232 control
- Shall provide one (1) bidirectional RS-232 serial port on the front panel for setup and configuration
- Shall provide a recessed Reset button on the rear panel
- Shall provide front panel controller with tri-color backlit buttons for functional control of the matrix switcher
- Provide a discrete button for each input and output
- Provide four (4) control buttons labeled ENTER, PRESET, VIEW, and ESC
- Enable custom labeling for input and output buttons
- Buttons shall illuminate red, green, or amber, depending on function
- Shall provide front panel security lockout to prevent unauthorized use in non-secure environments
- Shall provide one (1) RJ-45 connector on the rear panel for setup, configuration, and control via an Ethernet connection
- Shall support Ethernet monitoring and control using standard TCP/IP protocols
- Proactive monitoring and system management over a LAN, WAN, or the Internet
- Advanced computer-aided diagnostics
- Firmware updates
- Functional control of the matrix switcher
- Shall support SNMP for remote monitoring
- Shall provide one (1) bidirectional RS-232/RS-422 connector on the rear panel for control and firmware updates
- Shall provide Extron control software to enable control and configuration from a Windows®-based computer via the serial or Ethernet port
- Shall include advanced self-diagnostics of I/O boards, primary and redundant power supply voltages, fiber links, and overall matrix functionality
- Shall support alarm notification to an external control system in case of fiber link loss
- Shall provide I/O port activity status via the rear panel, RS-232 or RS-422 port, or Ethernet
- Shall provide I/O activity viewable within internal Web pages that are easily obtainable by AV control systems
- Shall support multiple methods for control, configuration, I/O selection, and general operation
- Secure switching requirements
- Shall support secure partitioning into smaller sub-switchers to segregate sources and destinations in a secure environment
- Enable up to twelve (12) partitions
- Inputs can only be tied to outputs within the same partition
- Shall provide priority switching to prevent unauthorized access to sensitive date in a secure environment
- Each input and output is assigned a security level from one (1) to six (6) with level one (1) as the lowest level and level six (6) as the highest
- An input can only be tied to an output that is at the same level or higher
- Shall support secure partitioning into smaller sub-switchers to segregate sources and destinations in a secure environment
- Functional requirements
- Shall provide commands or control sequences for functional operation of the matrix switcher
- Create or remove ties within the matrix
- Group inputs and outputs
- Save or recall presets
- Mute or unmute outputs
- Shall provide 64 memory presets for saving and recalling commonly used I/O ties
- Shall provide rooming capability to create 10 rooms by groups of outputs, each with separate presets
- Shall provide commands or control sequences for functional operation of the matrix switcher
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- Power requirements
- Shall provide dual redundant power supplies
- Shall support hot-swappable power supply replacement
- Shall provide two (2) AC power inputs for continuous connection to primary and secondary power sources
- General requirements
- Shall be a 8U high, full rack width metal enclosure
- Shall be rack mountable with integrated brackets
- Shall provide two (2) internal, hot-swappable fans
- Shall meet regulatory compliance
- CE, c-UL, UL
- CE, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall be compatible with Extron FOX Series products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series products for AV signal distribution and routing over fiber optic cabling
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron FOX Matrix 7200 (60-1256-01); no alternates or equals
FOX I/O 88 MM
- Shall provide a multimode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series MM fiber optic extenders
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall provide an optical loss budget of 7 dB between each board I/O and a connected FOX or FOX II Series MM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Approved device shall be the Extron FOX I/O 88 MM (70-791-21); no alternates or equals
FOX I/O 88 MM
- Shall provide a multimode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series MM fiber optic extenders
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cable at 850 nm
- Shall provide an optical loss budget of 7 dB between each board I/O and a connected FOX or FOX II Series MM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Shall be compatible with Extron FOX Series MM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series MM products for AV signal distribution and routing over fiber optic cabling
- Approved device shall be the Extron FOX I/O 88 MM (70-791-21); no alternates or equals
FOX I/O 88 SM
- Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series SM fiber optic extenders
- Shall be compatible with Extron FOX Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX or FOX II Series SM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 SM (70-791-22); no alternates or equals
FOX I/O 88 SM
- Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of video, audio, and control signals
- Single slot fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Eight (8) input connectors per board
- Eight (8) output connectors per board
- Shall provide selectable input and output reclocking
- Shall provide Status LED indicators for fiber link and reclocking status
- Shall support remote device connections via fiber optic transmitters and receivers
- Shall be compatible with Extron FOX and FOX II Series SM fiber optic extenders
- Shall be compatible with Extron FOX Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall be compatible with Extron FOX II Series SM products for AV signal distribution and routing over fiber optic cabling
- Shall provide sixteen (16) LC-type connectors for fiber optic signals
- Signal switching requirements
- Shall support all-digital switching of DisplayPort, HDMI, DVI, 3G-SDI, RGB, HD component, and standard definition video, as well as audio and control signals
- Shall support a mix of digital and analog video source signal types
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling and 10 bits color bit depth
- Support 4K up to 30 Hz with 8 bits per color over one connection
- Support 4K at 50 or 60 Hz with 8 bits per color over two parallel connections
- Support 4K at 50 or 60 Hz with 10 bits per color over four parallel connections
- Support 4K at 120 Hz with 8 bits per color over four parallel connections
- Shall be compatible with Extron FOX Series USB extenders for all-digital switching of USB signals
- Transmission requirement
- Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
- Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX or FOX II Series SM device
- HDCP requirements
- Shall include Extron SpeedSwitch® technology for high-speed switching of HDCP-encrypted content
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 SM (70-791-22); no alternates or equals
FOX I/O 88 HD-SDI
- Shall provide an I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of 3G-SDI/HD-SDI/SDI signals
- Single slot 3G-SDI I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide eight (8) female BNC input connectors for 3G-SDI/HD-SDI/SDI digital video signals with or without embedded audio
- Shall provide eight (8) female BNC output connectors for 3G-SDI/HD-SDI/SDI digital video signals with or without embedded audio
- Shall comply with SMPTE 259M, 292M, 424M, and ITU digital video standards
- Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
- Shall provide automatic equalization on buffered inputs
- Shall provide automatic reclocking on buffered outputs
- Shall support data rates from 270 Mbps to 2.97 Gbps
- Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
- Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
- Signal switching requirements
- Shall support all-digital switching of 3G-SDI, HD-SDI, and SDI video
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel 3G-SDI connections
- Shall support video genlock with separate bi-level and tri-level references for correct vertical interval switch timing
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 HD-SDI (70-792-01); no alternates or equals
FOX I/O 88 HD-SDI
- Shall provide an I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of 3G-SDI/HD-SDI/SDI signals
- Single slot 3G-SDI I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Input and output requirements
- Shall provide eight (8) female BNC input connectors for 3G-SDI/HD-SDI/SDI digital video signals with or without embedded audio
- Shall provide eight (8) female BNC output connectors for 3G-SDI/HD-SDI/SDI digital video signals with or without embedded audio
- Shall comply with SMPTE 259M, 292M, 424M, and ITU digital video standards
- Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
- Shall provide automatic equalization on buffered inputs
- Shall provide automatic reclocking on buffered outputs
- Shall support data rates from 270 Mbps to 2.97 Gbps
- Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
- Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
- Signal switching requirements
- Shall support all-digital switching of 3G-SDI, HD-SDI, and SDI video
- Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel 3G-SDI connections
- Shall support video genlock with separate bi-level and tri-level references for correct vertical interval switch timing
- General requirements
- Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
- Shall be hot-swappable
- Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
- Approved device shall be the Extron FOX I/O 88 HD-SDI (70-792-01); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
製品をEメールでシェア
FOX Matrix 7200
モジュール式光ファイバーマトリックススイッチャー（8入力8出力～72入力72出力）
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。
Chrome
Firefox
Edge
Safari