EDID 101H 4K PLUS

EDID 101H 4K PLUS

1. Provide an EDID emulator that shall provide automatic and continuous EDID management for HDMI signal sources
   1. Shall provide EDID emulation for HDMI video and embedded digital audio signals
      1. Shall support computer and video resolutions up to 4096x2160 at 60 Hz at 4:4:4 chroma sampling at 8‑bits of color
      2. Shall support HDMI specifications including data rates up to 18 Gbps, HDR, 12-bit Deep Color, 3D, and HD lossless audio formats
      3. Shall support CEC pass-through
   2. Video Input Requirements
      1. Shall provide one (1) female HDMI Type A connector for HDMI video and embedded digital audio signals
      2. Shall provide automatic HDMI input cable equalization
   3. Video Output Requirements
      1. Shall provide one (1) female HDMI Type A connector for HDMI video and embedded digital audio signals
      2. Shall provide automatic management of color bit depth based on the capabilities of the connected display, as reported by display EDID
      3. Shall automatically reformat HDMI source signals for output to a connected DVI display.
   4. EDID Requirements
      1. Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
         1. Provide a set of pre-stored EDID files
         2. Support capture of EDID from any connected display
         3. Support user uploading of custom-generated EDID files
         4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to the HDMI input connection
   5. HDCP requirements
      1. Shall be HDCP 2.3 compliant
      2. Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
      3. Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
      4. Shall provide real-time verification of HDCP status for HDMI input and output
         1. Electronically accessible over a USB connection
   6. Control Requirements
      1. Shall provide control connection
         1. On (1) female mini USB type B
         2. Comply with USB 2.0 standard
      2. Shall provide alternatives for configuration and operation
         1. Product configuration software connected via USB
         2. Serial commands sent over USB connection
   7. General Requirements
      1. Shall provide +5 VDC, 250 mA power on the output for an external peripheral device
      2. Enclosure shall be rack-mountable, one-quarter rack width, and 1” (2.5cm) in height
      3. Shall be mountable under a table, desk, or other flat surface
      4. Shall receive 12 Volt DC, 1 A regulated power from an external power supply
      5. Shall meet regulatory compliances
         1. Shall meet safety compliances under CE, c-UL, and UL
         2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
      6. Shall provide at least three years parts and labor warranty
2. Approved device shall be the Extron EDID 101H 4K PLUS (part number 60-1680-01); no alternates or equals