最近閲覧した製品
ECM S10
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
ECM S10
- Provide a partition sensor set for the purpose of detecting the position of a moveable wall within divisible rooms
- Partition sensor set that automates system behavior based on the position of a moveable wall within divisible rooms
- Partition sensor set featuring a transmitter and receiver that can positioned up to 10 feet (3 meters) apart
- Device shall feature an eBUS port on 4 pole captive screw connectors located on the back of the receiver that allows communication to the control processor and for control system expansion.
- Device shall feature a digital output on the back of the receiver for connecting to other products featuring a digital input
- Device shall feature a 14-Volt DC output on the back of the receiver that is used to power the transmitter
- Device shall feature a six-pole DIP switch located under the receiver cover that is used for assigning a unique Bus ID to the partition sensor set
- Device shall feature a sensitivity adjustment located under the receiver cover that is used for adjusting the sensitivity on the partition sensor set
- Device shall feature a sensor setting switch located under the receiver cover for toggling between normally open and normally closed
- Device shall include a reset button located under the receiver cover that allows for the reset back to original factory settings.
- Device shall feature three eBUS status LEDs located on the back of the receiver that will be used as a visual indication of connection, communication, and ID status.
- Device may be wired using the following topologies: Daisy Chain, Star, and Hybrid.
- The cable length of a topology may not exceed a sum total 1,000 feet.
- eBUS supports a maximum of eight devices when using Global Configurator Plus or Professional
- eBUS supports the following cabling types:
- Extron STP20-2 Cable
- CAT5e or CAT 6 cable, the cable must be 23 AWG solid copper wire.
- eBUS supports power and communication over a single cable.
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
- Device shall include two white, oversized decorator-style wallplates and mud rings
- Mounting requirements
- Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface and shall be able to be secured using the supplied mud ring and hardware.
- Device shall be capable of mounting into a US single gang, EU, or MK junction boxes
- Software requirements
- The interface may be configured or programmed using Extron’s Global Configurator Plus or Professional or Global Scripter respectively.
- Shall meet regulatory compliances
- CE
- c-UL
- C-Tick
- FCC Class A
- ICES
- RoHS
- UL
- VCCI class A
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron ECM S10, part number 60-1705-03; no alternates or equals
- Partition sensor set that automates system behavior based on the position of a moveable wall within divisible rooms
ECM S10
- Provide a partition sensor set for the purpose of detecting the position of a moveable wall within divisible rooms
- Partition sensor set that automates system behavior based on the position of a moveable wall within divisible rooms
- Partition sensor set featuring a transmitter and receiver that can positioned up to 10 feet (3 meters) apart
- Device shall feature an eBUS port on 4 pole captive screw connectors located on the back of the receiver that allows communication to the control processor and for control system expansion.
- Device shall feature a digital output on the back of the receiver for connecting to other products featuring a digital input
- Device shall feature a 14-Volt DC output on the back of the receiver that is used to power the transmitter
- Device shall feature a six-pole DIP switch located under the receiver cover that is used for assigning a unique Bus ID to the partition sensor set
- Device shall feature a sensitivity adjustment located under the receiver cover that is used for adjusting the sensitivity on the partition sensor set
- Device shall feature a sensor setting switch located under the receiver cover for toggling between normally open and normally closed
- Device shall include a reset button located under the receiver cover that allows for the reset back to original factory settings.
- Device shall feature three eBUS status LEDs located on the back of the receiver that will be used as a visual indication of connection, communication, and ID status.
- Device may be wired using the following topologies: Daisy Chain, Star, and Hybrid.
- The cable length of a topology may not exceed a sum total 1,000 feet.
- eBUS supports a maximum of eight devices when using Global Configurator Plus or Professional
- eBUS supports the following cabling types:
- Extron STP20-2 Cable
- CAT5e or CAT 6 cable, the cable must be 23 AWG solid copper wire.
- eBUS supports power and communication over a single cable.
- Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
- Device shall include two white, oversized decorator-style wallplates and mud rings
- Mounting requirements
- Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface and shall be able to be secured using the supplied mud ring and hardware.
- Device shall be capable of mounting into a US single gang, EU, or MK junction boxes
- Software requirements
- The interface may be configured or programmed using Extron’s Global Configurator Plus or Professional or Global Scripter respectively.
- Shall meet regulatory compliances
- CE
- c-UL
- C-Tick
- FCC Class A
- ICES
- RoHS
- UL
- VCCI class A
- WEEE
- Product Warranty
- Shall provide at least 3 years parts and labor
- Approved device shall be the Extron ECM S10, part number 60-1705-03; no alternates or equals
- Partition sensor set that automates system behavior based on the position of a moveable wall within divisible rooms
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

ECM S10
パーティションセンサー
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。