Provide a switcher that shall support up to three inputs and one output for switching of DisplayPort, HDMI, and VGA sources, with support for long distance signal extension over shielded CATx cable.
Rack-mountable switcher for DisplayPort, HDMI, and VGA sources, and associated digital and analog audio, plus signal extension over shielded CATx cable
Video Input Requirements
Provide video input connections
One DisplayPort
One HDMI
One 15-pin HD for analog video
Shall digitize video input signals up to 1920x1200 prior to transmission to the digital video output
Supported HDMI specifications include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
Shall support DisplayPort SST - Single Stream Transport data rates up to 10.8 Gbps
Support digital video resolutions up to 4K, including 1080p/60 Deep Color
Video Output Requirements
Provide video output connections
One RJ-45 for connection an Extron DTP®-enabled product
Support connection of DVI displays that do not recognize HDMI-specific formats
Automatically enable or disable embedded TMDS audio and InfoFrames
Automatically set the correct color space
Provide signal transmission distance capability of 330 feet (100 m) for supported resolutions, including 4K, UHD, 2560x1600, and 1080p @ 60 Hz using a shielded CATx cable
Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display
Switching Requirements
Provide automatic switching between input sources
Automatically switch to the active input
Provide a configurable switching priority when multiple inputs are active
High to low: highest numbered input has priority
Low to high: lowest numbered input has priority
Provide the capability to set the analog audio input to follow the input switch
EDID Requirements
Provide automatic EDID management between connected devices
Provide a set of pre-stored EDID files
Support capture of EDID from any connected display
Support user uploading of custom-generated EDID files
Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
HDCP Requirements
The unit shall be HDCP compliant
Shall provide the option to disable HDCP processing at the DisplayPort or HDMI input connection when passing unencrypted content
Provide real-time verification of HDCP status for each digital video input
Accessible through front panel LEDs
Electronically accessible over RS-232 or USB connection
Audio Requirements
Provide audio input connections
One DisplayPort, embedded
One HDMI, embedded
One 3.5 mm stereo mini jack, unbalanced analog stereo
Provide audio output connection
One RJ-45, DTP HDMI embedded and analog audio
Provide the capability to assign the analog audio input to any video input
Provide the capability to set the analog audio input to follow the input switch
Support embedding analog stereo audio signals onto the digital video output signal and transport over DTP
Support multiple embedded audio formats
Support audio transmission over shielded CATx up to 330 feet (100 meters)
Shall digitize analog stereo audio input for transmission over shielded CATx
Control/Remote – RS-232 and IR Pass-Through over Shielded CATx Requirements
Provide connection for AV device control
5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
Control/Remote – Switcher Control Requirements
Provide connections for remote switcher control
3-pole captive screw: RS-232
Mini USB-B: USB 2.0
4-pole captive screw: contact closure
4-pole captive screw: tally
Provide alternatives for configuration and operation
Front panel controls
Product configuration software connected via USB
Serial commands sent over RS-232 or USB connection
Tally output shall provide +5 VDC to light an LED indicating the currently selected input
Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
General Requirements
Provide real-time verification of signal flow and operation
Directly readable on RJ-45 signal and link LEDs
Shall be compatible with all Extron DTP-enabled products
Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
Provide power to a connected DTP receiver
Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
Enclosure shall be rack-mountable, half rack width, and 1" (2.5 cm) in height
Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
Shall meet regulatory compliances
CE, c-UL, UL
CE, C-tick, FCC Class A, ICES, VCCI
Shall provide at least 3 years parts and labor warranty
Approved device shall be the Extron DTP T DSW 4K 333 (part number 60-1487-52); no alternates or equals
DTP T DSW 4K 333
Provide a switcher that shall support up to three inputs and one output for switching of DisplayPort, HDMI, and VGA sources, with support for long distance signal extension over shielded CATx cable.
Rack-mountable switcher for DisplayPort, HDMI, and VGA sources, and associated digital and analog audio, plus signal extension over shielded CATx cable
Video Input Requirements
Provide video input connections
One DisplayPort
One HDMI
One 15-pin HD for analog video
Shall digitize video input signals up to 1920x1200 prior to transmission to the digital video output
Supported HDMI specifications include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
Shall support DisplayPort SST - Single Stream Transport data rates up to 10.8 Gbps
Support digital video resolutions up to 4K, including 1080p/60 Deep Color
Video Output Requirements
Provide video output connections
One RJ-45 for connection an Extron DTP®-enabled product
Support connection of DVI displays that do not recognize HDMI-specific formats
Automatically enable or disable embedded TMDS audio and InfoFrames
Automatically set the correct color space
Provide signal transmission distance capability of 330 feet (100 m) for supported resolutions, including 4K, UHD, 2560x1600, and 1080p @ 60 Hz using a shielded CATx cable
Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display
Switching Requirements
Provide automatic switching between input sources
Automatically switch to the active input
Provide a configurable switching priority when multiple inputs are active
High to low: highest numbered input has priority
Low to high: lowest numbered input has priority
Provide the capability to set the analog audio input to follow the input switch
EDID Requirements
Provide automatic EDID management between connected devices
Provide a set of pre-stored EDID files
Support capture of EDID from any connected display
Support user uploading of custom-generated EDID files
Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
HDCP Requirements
The unit shall be HDCP compliant
Shall provide the option to disable HDCP processing at the DisplayPort or HDMI input connection when passing unencrypted content
Provide real-time verification of HDCP status for each digital video input
Accessible through front panel LEDs
Electronically accessible over RS-232 or USB connection
Audio Requirements
Provide audio input connections
One DisplayPort, embedded
One HDMI, embedded
One 3.5 mm stereo mini jack, unbalanced analog stereo
Provide audio output connection
One RJ-45, DTP HDMI embedded and analog audio
Provide the capability to assign the analog audio input to any video input
Provide the capability to set the analog audio input to follow the input switch
Support embedding analog stereo audio signals onto the digital video output signal and transport over DTP
Support multiple embedded audio formats
Support audio transmission over shielded CATx up to 330 feet (100 meters)
Shall digitize analog stereo audio input for transmission over shielded CATx
Control/Remote – RS-232 and IR Pass-Through over Shielded CATx Requirements
Provide connection for AV device control
5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
Control/Remote – Switcher Control Requirements
Provide connections for remote switcher control
3-pole captive screw: RS-232
Mini USB-B: USB 2.0
4-pole captive screw: contact closure
4-pole captive screw: tally
Provide alternatives for configuration and operation
Front panel controls
Product configuration software connected via USB
Serial commands sent over RS-232 or USB connection
Tally output shall provide +5 VDC to light an LED indicating the currently selected input
Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
General Requirements
Provide real-time verification of signal flow and operation
Directly readable on RJ-45 signal and link LEDs
Shall be compatible with all Extron DTP-enabled products
Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
Provide power to a connected DTP receiver
Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
Enclosure shall be rack-mountable, half rack width, and 1" (2.5 cm) in height
Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
Shall meet regulatory compliances
CE, c-UL, UL
CE, C-tick, FCC Class A, ICES, VCCI
Shall provide at least 3 years parts and labor warranty
Approved device shall be the Extron DTP T DSW 4K 333 (part number 60-1487-52); no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
DTP T DSW 4K 333 -
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.