DTP3 T 101 D

DTP3 T 101 D

1. Provide an HDMI wallplate twisted pair transmitter that shall support the distribution of HDMI over a shielded CAT 6A cable
   1. One-gang decorator-style wallplate transmitter for the extension of HDMI
   2. Video input requirements
      1. Shall provide one (1) HDMI input
         1. Supported HDMI 2.0 specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
      2. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
      3. Shall support RGB and YCbCr digital video formats
   3. Audio input requirements
      1. Shall support embedded digital audio on HDMI input
      2. Shall support multiple embedded audio formats
      3. Shall support embedded HD lossless audio formats
   4. Video output requirements
      1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
      2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
   5. Transmission requirements
      1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
   6. EDID requirements
      1. Shall provide automatic EDID management between connected devices
         1. Provide a set of pre-stored EDID files
         2. Support capture of EDID from any connected display
         3. Support user uploading of custom-generated EDID files
         4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
   7. HDCP requirements
      1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
   8. Power requirements
      1. Shall accept remote power from a DTP3-enabled product
      2. Shall accept local power
      3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
   9. General requirements
      1. Shall include a USB-C configuration port on the rear panel for data access and firmware updates
      2. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
      3. Shall provide visual indication of signal presence on front of wallplate
      4. Shall meet regulatory compliances
         1. CE, c-UL, UL
         2. CE, C-tick, FCC Class A, ICES, VCCI, KCC
         3. Appropriate requirements of RoHS and WEEE
         4. UL-rated for use in plenum airspaces; meets UL 2043 for heat and smoke release, excluding the power supply
      5. Shall provide at least three (3) years parts and labor warranty
   10. Approved device shall be the Extron DTP3 T 101 D (60-1902-52 or 60-1902-53); no alternates or equals