最近閲覧した製品
DA HD 4K PLUSシリーズ
コンサルタント向け資料
製品番号を選択してください:
テキストをコピー
コピーされました!
エラーが発生しました。しばらくしてからもう一度お試しください。
DA2 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide two (2) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an external, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an external, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be housed in a 1” (2.5 cm) high, quarter rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA2 HD 4K PLUS, part number 60-1607-01; no alternates or equals
DA2 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide two (2) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an external, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an external, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be housed in a 1” (2.5 cm) high, quarter rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA2 HD 4K PLUS, part number 60-1607-01; no alternates or equals
DA4 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide four (4) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be convection cooled with vents on top panel
- Shall be housed in a 1U high, half rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA4 HD 4K PLUS, part number 60-1607-01; no alternates or equals
DA4 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide four (4) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be convection cooled with vents on top panel
- Shall be housed in a 1U high, half rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA4 HD 4K PLUS, part number 60-1607-01; no alternates or equals
DA6 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide six (6) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be convection cooled with vents on top panel
- Shall be housed in a 1U high, half rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA6 HD 4K PLUS, part number 60-1607-01; no alternates or equals
DA6 HD 4K PLUS
- Shall be a distribution amplifier for HDMI video and embedded digital audio signals
- Shall support local device connection
- Shall support computer and video resolutions with 4:4:4 chroma sampling up to 4096x2160 at 60 Hz and 1920x1200 at 60 Hz
- Shall support HDMI 2.0b specifications, including data rates up to 18 Gbps, Deep Color up to 12‑bit, 3D, HDR, HD lossless audio formats, and CEC.
- Video input requirements
- Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
- Shall provide automatic input cable equalization
- Video output requirements
- Shall provide six (6) female HDMI Type A connectors for digital video signals with embedded audio
- EDID requirements
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- User-selection of EDID from the connected display
- User-selection of EDID from pre-stored data files
- User upload of custom-generated EDID files
- Assignment of pre-stored, captured, or uploaded files
- Maintain continuous EDID communication with the connected sources
- Shall provide automatic management of color bit depth based on the capabilities of the connected displays, as reported by display EDID
- Shall include Extron EDID Minder® technology for automatic management of EDID communication between connected devices
- HDCP requirements
- Shall be HDCP 2.3 compliant
- Shall include Extron Key Minder® technology to authenticate and maintain continuous verification of HDCP key exchange between the connected source and sink devices
- Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
- Shall provide a full green screen signal for visual confirmation when encrypted content is routed to a non-HDCP compliant display
- Shall provide real-time verification of HDCP status for each HDMI input and output
- Electronically accessible over RS-232 or USB connection
- Control requirements
- Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear panel for control
- Shall provide one (1) USB mini-B connector on front panel for setup, configuration, and firmware update loading
- Shall provide selectable output muting via RS-232 or USB port to allow content to be viewed on a local monitor prior to appearance on a main presentation display
- Shall support device setup and commissioning using Extron Product Configuration Software
- Power requirements
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- High demonstrated reliability
- Worldwide power compatibility
- Shall provide +5 VDC, 250 mA power on each output for an external peripheral device
- Shall include an internal, universal AC power supply supporting 100-240 VAC, 50/60 Hz power
- General requirements
- Shall be convection cooled with vents on top panel
- Shall be housed in a 1U high, half rack-width metal enclosure
- Shall be rack mountable with optional rack shelf or rack shelf kit
- Shall be furniture mountable with optional mounting kits
- Shall provide visual signal on LED indicators located on front panel for signal presence and HDCP authentication
- Shall provide automatic reformatting of HDMI source signals when routed to a DVI display
- Shall include LockIt® HDMI cable lacing brackets
- Shall meet regulatory compliance
- CE, c-UL, UL
- CD, C-tick, FCC Class A, ICES, VCCI
- Product-appropriate RoHS and WEEE
- Shall provide at least three years parts and labor warranty
- Approved device shall be the Extron DA6 HD 4K PLUS, part number 60-1607-01; no alternates or equals
アイテムをカートに追加する
Order Message Number
製品番号
注: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.
現在の合計金額:
製品をEメールでシェア

DA HD 4K PLUSシリーズ
4K/60 HDMI分配器
Eメールアドレスを正しく入力してください。
ありがとうございます。Emailの送信が完了しました。
Eメール送信中にエラーが発生しました。しばらくしてからもう一度お試しください。